component
TPS2211IDBR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2211IDBR
Texas Instruments · Power Distribution Switches · SSOP-16-208mil
TPS2211IDBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCCD0 | input | Logic input that controls the voltage of AVCC (see the datasheet control-logic table, not included in the supplied text); absolute maximum logic input voltage is -0.3 V to 7 V. |
| 2 | VCCD1 | input | Logic input that controls the voltage of AVCC (see the datasheet control-logic table, not included in the supplied text); absolute maximum logic input voltage is -0.3 V to 7 V. |
| 3 | 3.3V | input | 3.3-V VCC input for card power and/or chip power if 5 V is not present, with recommended input voltage 0 V to 5.25 V. |
| 4 | 3.3V | input | 3.3-V VCC input for card power and/or chip power if 5 V is not present, with recommended input voltage 0 V to 5.25 V. |
| 5 | 5V | input | 5-V VCC input for card power and/or chip power, with recommended input voltage 0 V to 5.25 V. |
| 6 | 5V | input | 5-V VCC input for card power and/or chip power, with recommended input voltage 0 V to 5.25 V. |
| 7 | GND | power_in | Ground reference for the device. |
| 8 | OC | output | Logic-level overcurrent reporting output that goes low when an overcurrent condition exists. |
| 9 | 12V | input | 12-V Vpp input for card power, with recommended input voltage 0 V to 13.5 V. |
| 10 | AVPP | output | Switched Vpp output that delivers 0 V, 3.3 V, 5 V, 12 V, or high impedance to the card, with output current limited to 150 mA. |
| 11 | AVCC | output | Switched VCC output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card, with output current limited to 1 A. |
| 12 | AVCC | output | Switched VCC output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card, with output current limited to 1 A. |
| 13 | AVCC | output | Switched VCC output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card, with output current limited to 1 A. |
| 14 | VPPD1 | input | Logic input that controls the voltage of AVPP (see the datasheet control-logic table, not included in the supplied text); absolute maximum logic input voltage is -0.3 V to 7 V. |
| 15 | VPPD0 | input | Logic input that controls the voltage of AVPP (see the datasheet control-logic table, not included in the supplied text); absolute maximum logic input voltage is -0.3 V to 7 V. |
| 16 | SHDN | input | Logic input that shuts down the TPS2211 and sets all power outputs to high-impedance state; logic input high level is 2 V minimum and low level is 0.8 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-208mil |
| Category | Power Supply Chip |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TPS2211IDBR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
tps2211idbr-etched.step/tps2211idbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2211idbr.step/tps2211idbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
e487c5b99d972010, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).