Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC32MZ2064DAG176-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-176(20x20)

PIC32MZ2064DAG176-I from Microchip Tech, in a LQFP-176(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VREF-/CVREF-/AN27/RA9 power_in Analog voltage reference low input (VREF-) for the ADC, also CVREF- comparator reference input, AN27 and PORTA bit RA9.
2 VREF+/CVREF+/AN28/RA10 power_in Analog voltage reference high input (VREF+) for the ADC, also CVREF+ comparator reference input, AN28 and PORTA bit RA10.
3 AVDD power_in Positive supply for analog modules; this pin must be connected at all times.
4 AVDD power_in Positive supply for analog modules; this pin must be connected at all times.
5 AVSS power_in Ground reference for analog modules; this pin must be connected at all times.
6 AVSS power_in Ground reference for analog modules; this pin must be connected at all times.
7 AN3/C2INA/RPB15/OCFB/RB15 input ADC analog input AN3 that is also Comparator 2 positive input C2INA, shared with PORTB bit RB15, remappable RPB15 and Output Compare fault B input OCFB.
8 AN8/RPB3/RB3 input ADC analog input AN8 shared with PORTB bit RB3 and remappable pin RPB3.
9 AN48/CTPLS/RB13 input ADC analog input AN48 shared with PORTB bit RB13 and CTMU output pulse CTPLS.
10 EBID10/AN4/RPB8/PMD10/RB8 bidirectional External Bus Interface data bit 10 shared with ADC input AN4, PORTB bit RB8, remappable RPB8 and PMP data bit PMD10.
11 PGEC1/AN9/RPB1/CTED1/RB1 input ICSP/debug Channel 1 clock input PGEC1 shared with ADC input AN9, PORTB bit RB1 and CTMU edge input CTED1; no pull-ups, series diodes or bypass capacitors are allowed on it.
12 AN49/RB11 input ADC analog input AN49 shared with PORTB bit RB11.
13 PGEC2/RPB6/RB6 input ICSP/debug Channel 2 clock input PGEC2 shared with PORTB bit RB6 and remappable RPB6; no pull-ups, series diodes or bypass capacitors are allowed on it.
14 EBID12/AN10/RPC2/PMD12/RC2 bidirectional External Bus Interface data bit 12 shared with ADC input AN10, PORTC bit RC2, remappable RPC2 and PMP data bit PMD12.
15 EBIWE/AN34/RPC3/PMWR/RC3 output External Bus Interface write enable EBIWE shared with ADC input AN34, PORTC bit RC3, remappable RPC3 and PMP write strobe PMWR.
16 EBIOE/AN19/RPC4/PMRD/RC4 output External Bus Interface output enable EBIOE shared with ADC input AN19, PORTC bit RC4, remappable RPC4 and PMP read strobe PMRD.
17 EBID5/AN12/RPC1/PMD5/RC1 bidirectional External Bus Interface data bit 5 shared with ADC input AN12, PORTC bit RC1, remappable RPC1 and PMP data bit PMD5.
18 VDDCORE power_in 1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times.
19 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
20 No Connect unconnected No connect pin on the 176-pin LQFP package.
21 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
22 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
23 EBID6/AN16/PMD6/RE6 bidirectional External Bus Interface data bit 6 shared with ADC input AN16, PORTE bit RE6 and PMP data bit PMD6.
24 EBID7/AN15/PMD7/RE7 bidirectional External Bus Interface data bit 7 shared with ADC input AN15, PORTE bit RE7 and PMP data bit PMD7.
25 AN25/RPE8/RE8 input ADC analog input AN25 shared with PORTE bit RE8 and remappable pin RPE8.
26 AN26/RPE9/RE9 input ADC analog input AN26 shared with PORTE bit RE9 and remappable pin RPE9.
27 TDO/AN31/RPF12/RF12 output JTAG test data output TDO shared with ADC input AN31, remappable RPF12 and PORTF bit RF12.
28 TDI/AN17/SCK5/RF13 input JTAG test data input TDI shared with ADC input AN17, SPI5 clock SCK5 and PORTF bit RF13 (Schmitt trigger input).
29 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
30 AN14/C1IND/SCK2/RG6 input ADC analog input AN14 shared with Comparator 1 input C1IND, SPI2 clock SCK2 and PORTG bit RG6.
31 AN13/C1INC/RPG7/SDA4/RG7 input ADC analog input AN13 shared with Comparator 1 input C1INC, remappable RPG7, I2C4 data SDA4 and PORTG bit RG7.
32 AN30/C2IND/RPG8/SCL4/RG8 input ADC analog input AN30 shared with Comparator 2 input C2IND, remappable RPG8, I2C4 clock SCL4 and PORTG bit RG8.
33 EBIA2/AN23/C2INC/RPG9/PMA2/RG9 output External Bus Interface address bit 2 shared with ADC input AN23, Comparator 2 input C2INC, remappable RPG9, PMP address PMA2 and PORTG bit RG9.
34 AN21/RG15 input ADC analog input AN21 shared with PORTG bit RG15.
35 AN20/RH4 input ADC analog input AN20 shared with PORTH bit RH4.
36 EBID1/AN39/PMD1/RE1 bidirectional External Bus Interface data bit 1 shared with ADC input AN39, PORTE bit RE1 and PMP data bit PMD1.
37 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
38 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
39 VDDCORE power_in 1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times.
40 EBID0/PMD0/RE0 bidirectional External Bus Interface data bit 0 shared with PMP data bit PMD0 and PORTE bit RE0.
41 RPF2/SDA3/RF2 bidirectional Remappable pin RPF2 shared with I2C3 data SDA3 and PORTF bit RF2.
42 INT0/RH14 input External interrupt 0 (Schmitt trigger input) shared with PORTH bit RH14.
43 EBID4/AN18/PMD4/RE4 bidirectional External Bus Interface data bit 4 shared with ADC input AN18, PORTE bit RE4 and PMP data bit PMD4.
44 No Connect unconnected No connect pin on the 176-pin LQFP package.
45 VBUS power_in USB bus power monitor input (analog) for the USB OTG module.
46 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used this pin must be connected to VSS.
47 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used this pin must be connected to VSS.
48 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
49 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
50 D- bidirectional USB D- differential data line (analog).
51 D+ bidirectional USB D+ differential data line (analog).
52 USBID input USB OTG ID detect input (Schmitt trigger).
53 TMS/SDCD/RA0 input JTAG test mode select TMS (Schmitt trigger input) shared with SD card detect SDCD and PORTA bit RA0.
54 TRCLK/SDCK/SQICLK/RA6 output Trace clock TRCLK shared with SD clock SDCK, SQI clock SQICLK and PORTA bit RA6.
55 TRD3/SDDATA3/SQID3/RA7 output Trace data bit 3 TRD3 shared with SD data SDDATA3, SQI data SQID3 and PORTA bit RA7.
56 TRD1/SDDATA1/SQID1/RG12 output Trace data bit 1 TRD1 shared with SD data SDDATA1, SQI data SQID1 and PORTG bit RG12.
57 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
58 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
59 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
60 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
61 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
62 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
63 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
64 TRD0/SDDATA0/SQID0/RG13 output Trace data bit 0 TRD0 shared with SD data SDDATA0, SQI data SQID0 and PORTG bit RG13.
65 TRD2/SDDATA2/SQID2/RG14 output Trace data bit 2 TRD2 shared with SD data SDDATA2, SQI data SQID2 and PORTG bit RG14.
66 DDRVREF power_in 1.8V voltage reference to the DDR2 SDRAM memory; this pin is a no connect in devices without DDR.
67 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
68 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
69 EBIA6/RPE5/PMA6/RE5 output External Bus Interface address bit 6 shared with remappable RPE5, PMP address PMA6 and PORTE bit RE5.
70 SDCMD/SQICS0/RPD4/RD4 output SD command SDCMD shared with SQI chip select SQICS0, remappable RPD4 and PORTD bit RD4.
71 SQICS1/RPD5/RD5 output SQI chip select SQICS1 shared with remappable RPD5 and PORTD bit RD5.
72 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
73 SCK1/RD1 bidirectional SPI1 synchronous serial clock input/output shared with PORTD bit RD1.
74 GD10/EBIA14/RPD2/PMA14/PMCS1/RD2 output Graphics display data bit 10 shared with EBI address bit 14, remappable RPD2, PMP address PMA14, PMP chip select PMCS1 and PORTD bit RD2.
75 GD11/EBIA15/RPD3/PMA15/PMCS2/RD3 output Graphics display data bit 11 shared with EBI address bit 15, remappable RPD3, PMP address PMA15, PMP chip select PMCS2 and PORTD bit RD3.
76 GD2/EBID15/RPD9/PMD15/RD9 output Graphics display data bit 2 shared with EBI data bit 15, remappable RPD9, PMP data bit PMD15 and PORTD bit RD9.
77 SCK4/RD10 bidirectional SPI4 synchronous serial clock input/output shared with PORTD bit RD10.
78 VDDR1V8 power_in Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR.
79 RTCC/RPD0/RD0 output Real-Time Clock alarm/seconds output RTCC (not available during VBAT operation) shared with remappable RPD0 and PORTD bit RD0.
80 GD7/EBIA12/RPD12/PMA12/RD12 output Graphics display data bit 7 shared with EBI address bit 12, remappable RPD12, PMP address PMA12 and PORTD bit RD12.
81 GD22/EBIA13/PMA13/RD13 output Graphics display data bit 22 shared with EBI address bit 13, PMP address PMA13 and PORTD bit RD13.
82 RPF8/SCL3/RF8 bidirectional Remappable pin RPF8 shared with I2C3 clock SCL3 and PORTF bit RF8.
83 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
84 VDDCORE power_in 1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times.
85 MCLR input Master Clear input; an active-low pull of this pin generates a device Reset.
86 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
87 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
88 No Connect unconnected No connect pin on the 176-pin LQFP package.
89 GD16/EBID8/RPF5/SCL5/PMD8/RF5 output Graphics display data bit 16 shared with EBI data bit 8, remappable RPF5, I2C5 clock SCL5, PMP data bit PMD8 and PORTF bit RF5.
90 GD5/EBIA10/RPF1/PMA10/RF1 output Graphics display data bit 5 shared with EBI address bit 10, remappable RPF1, PMP address PMA10 and PORTF bit RF1.
91 GD6/EBIA11/RPF0/PMA11/RF0 output Graphics display data bit 6 shared with EBI address bit 11, remappable RPF0, PMP address PMA11 and PORTF bit RF0.
92 GD21/EBIA23/RH15 output Graphics display data bit 21 shared with EBI address bit 23 and PORTH bit RH15.
93 ERXERR/RPF3/RF3 input Ethernet receive error input ERXERR shared with remappable RPF3 and PORTF bit RF3.
94 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
95 GD4/EBIA9/RPG1/PMA9/RG1 output Graphics display data bit 4 shared with EBI address bit 9, remappable RPG1, PMP address PMA9 and PORTG bit RG1.
96 GD3/EBIA8/RPG0/PMA8/RG0 output Graphics display data bit 3 shared with EBI address bit 8, remappable RPG0, PMP address PMA8 and PORTG bit RG0.
97 GD17/EBID9/RPF4/SDA5/PMD9/RF4 output Graphics display data bit 17 shared with EBI data bit 9, remappable RPF4, I2C5 data SDA5, PMP data bit PMD9 and PORTF bit RF4.
98 EBID3/RPE3/PMD3/RE3 bidirectional External Bus Interface data bit 3 shared with remappable RPE3, PMP data bit PMD3 and PORTE bit RE3.
99 EBID2/PMD2/RE2 bidirectional External Bus Interface data bit 2 shared with PMP data bit PMD2 and PORTE bit RE2.
100 ERXD1/RH5 input Ethernet receive data bit 1 (Schmitt trigger input) shared with PORTH bit RH5.
101 ERXD2/RH6 input Ethernet receive data bit 2 (Schmitt trigger input) shared with PORTH bit RH6.
102 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
103 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
104 ERXDV/ECRSDV/RH13 input Ethernet receive data valid (MII) or carrier sense data valid (RMII) input shared with PORTH bit RH13.
105 ECRS/RH12 input Ethernet carrier sense input (Schmitt trigger) shared with PORTH bit RH12.
106 ECOL/RH10 input Ethernet collision detect input (Schmitt trigger) shared with PORTH bit RH10.
107 ERXD3/RH9 input Ethernet receive data bit 3 (Schmitt trigger input) shared with PORTH bit RH9.
108 ERXD0/RH8 input Ethernet receive data bit 0 (Schmitt trigger input) shared with PORTH bit RH8.
109 ETXD3/RH1 output Ethernet transmit data bit 3 shared with PORTH bit RH1.
110 ETXD2/RH0 output Ethernet transmit data bit 2 shared with PORTH bit RH0.
111 ERXCLK/EREFCLK/RJ11 input Ethernet receive clock (MII) or reference clock (RMII) input shared with PORTJ bit RJ11.
112 ETXD1/RJ9 output Ethernet transmit data bit 1 shared with PORTJ bit RJ9.
113 ETXD0/RJ8 output Ethernet transmit data bit 0 shared with PORTJ bit RJ8.
114 EMDIO/RJ1 bidirectional Ethernet management data I/O shared with PORTJ bit RJ1.
115 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
116 VDDCORE power_in 1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times.
117 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
118 ETXERR/RJ0 output Ethernet transmit error output shared with PORTJ bit RJ0.
119 EMDC/RPD11/RD11 output Ethernet management data clock output shared with remappable RPD11 and PORTD bit RD11.
120 ETXCLK/RPD7/RD7 input Ethernet transmit clock input (Schmitt trigger) shared with remappable RPD7 and PORTD bit RD7.
121 ETXEN/RPD6/RD6 output Ethernet transmit enable output shared with remappable RPD6 and PORTD bit RD6.
122 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
123 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
124 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
125 RPA15/SDA1/RA15 bidirectional Remappable pin RPA15 shared with I2C1 data SDA1 and PORTA bit RA15.
126 RPA14/SCL1/RA14 bidirectional Remappable pin RPA14 shared with I2C1 clock SCL1 and PORTA bit RA14.
127 GD1/EBID14/PMD14/RA4 output Graphics display data bit 1 shared with EBI data bit 14, PMP data bit PMD14 and PORTA bit RA4.
128 EBIRDY1/SDA2/RA3 input EBI ready input EBIRDY1 shared with I2C2 data SDA2 and PORTA bit RA3.
129 SCL2/RA2 bidirectional I2C2 clock SCL2 shared with PORTA bit RA2.
130 GD19/EBIA21/RK7 output Graphics display data bit 19 shared with EBI address bit 21 and PORTK bit RK7.
131 GD15/EBIA20/RK6 output Graphics display data bit 15 shared with EBI address bit 20 and PORTK bit RK6.
132 GD14/EBIA19/RK5 output Graphics display data bit 14 shared with EBI address bit 19 and PORTK bit RK5.
133 GD13/EBIA18/RK4 output Graphics display data bit 13 shared with EBI address bit 18 and PORTK bit RK4.
134 GD12/EBIA17/RK3 output Graphics display data bit 12 shared with EBI address bit 17 and PORTK bit RK3.
135 EBIA3/AN11/PMA3/RK2 output External Bus Interface address bit 3 shared with ADC input AN11, PMP address PMA3 and PORTK bit RK2.
136 EBIA1/AN38/PMA1/RK1 output External Bus Interface address bit 1 shared with ADC input AN38, PMP address PMA1 and PORTK bit RK1.
137 GD23/EBIA16/RK0 output Graphics display data bit 23 shared with EBI address bit 16 and PORTK bit RK0.
138 EBIRDY2/AN37/RH11 input EBI ready input EBIRDY2 shared with ADC input AN37 and PORTH bit RH11.
139 EBIA4/AN36/PMA4/RH7 output External Bus Interface address bit 4 shared with ADC input AN36, PMP address PMA4 and PORTH bit RH7.
140 AN35/RH3 input ADC analog input AN35 shared with PORTH bit RH3.
141 SDWP/EBIRP/RH2 input SD write protect input SDWP shared with EBI flash reset output EBIRP and PORTH bit RH2.
142 EBIA0/PMA0/RJ15 output External Bus Interface address bit 0 shared with PMP address PMA0 and PORTJ bit RJ15.
143 GD8/EBID11/PMD11/RJ14 output Graphics display data bit 8 shared with EBI data bit 11, PMP data bit PMD11 and PORTJ bit RJ14.
144 GD0/EBID13/PMD13/RJ13 output Graphics display data bit 0 shared with EBI data bit 13, PMP data bit PMD13 and PORTJ bit RJ13.
145 GD9/EBIBS0/RJ12 output Graphics display data bit 9 shared with EBI byte select EBIBS0 and PORTJ bit RJ12.
146 GD18/EBIBS1/RJ10 output Graphics display data bit 18 shared with EBI byte select EBIBS1 and PORTJ bit RJ10.
147 GEN/EBICS3/RJ7 output Graphics display enable output GEN shared with EBI chip select EBICS3 and PORTJ bit RJ7.
148 GCLK/EBICS2/RJ6 output Graphics display pixel clock output GCLK shared with EBI chip select EBICS2 and PORTJ bit RJ6.
149 HSYNC/EBICS1/RJ5 output Graphics display horizontal sync output HSYNC shared with EBI chip select EBICS1 and PORTJ bit RJ5.
150 VSYNC/EBICS0/RJ4 output Graphics display vertical sync output VSYNC shared with EBI chip select EBICS0 and PORTJ bit RJ4.
151 GD20/EBIA22/RJ3 output Graphics display data bit 20 shared with EBI address bit 22 and PORTJ bit RJ3.
152 EBIRDY3/AN32/RJ2 input EBI ready input EBIRDY3 shared with ADC input AN32 and PORTJ bit RJ2.
153 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
154 VSS power_in Ground reference for logic, I/O pins and USB; this pin must be connected at all times.
155 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
156 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
157 AN33/SCK6/RD15 input ADC analog input AN33 shared with SPI6 clock SCK6 and PORTD bit RD15.
158 AN22/RPD14/RD14 input ADC analog input AN22 shared with remappable RPD14 and PORTD bit RD14.
159 AN29/SCK3/RB14 input ADC analog input AN29 shared with SPI3 clock SCK3 and PORTB bit RB14.
160 TCK/AN24/RA1 input JTAG test clock input TCK (Schmitt trigger) shared with ADC input AN24 and PORTA bit RA1.
161 SOSCO/RPC14/T1CK/RC14 output 32.768 kHz secondary oscillator output SOSCO shared with Timer1 external clock T1CK and PORTC bit RC14; the RC14 function is input-only.
162 SOSCI/RPC13/RC13 input 32.768 kHz secondary oscillator crystal input shared with PORTC bit RC13 (input-only function) and remappable RPC13.
163 OSC2/CLKO/RC15 output Primary oscillator crystal output OSC2 (also CLKO in RC and EC modes) shared with PORTC bit RC15.
164 OSC1/CLKI/RC12 input Primary oscillator crystal or external clock input OSC1 (Schmitt trigger in RC mode) shared with PORTC bit RC12.
165 VDDIO power_in Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times.
166 VBAT power_in Positive supply for the battery-backed section; if VBAT mode is not used it is recommended to connect this pin to VDDIO.
167 AN45/RPB5/RB5 input ADC analog input AN45 shared with remappable RPB5 and PORTB bit RB5.
168 AN5/RPB10/RB10 input ADC analog input AN5 shared with remappable RPB10 and PORTB bit RB10 (CVREFOUT is not available on this pin in this device).
169 PGED1/AN0/RPB0/CTED2/RB0 bidirectional ICSP/debug Channel 1 data I/O PGED1 shared with ADC input AN0, remappable RPB0, CTMU edge input CTED2 and PORTB bit RB0.
170 PGED2/C1INA/AN46/RPB7/RB7 bidirectional ICSP/debug Channel 2 data I/O PGED2 shared with Comparator 1 positive input C1INA, ADC input AN46, remappable RPB7 and PORTB bit RB7.
171 AN6/RB12 input ADC analog input AN6 shared with PORTB bit RB12.
172 AN1/C2INB/RPB2/RB2 input ADC analog input AN1 shared with Comparator 2 selectable negative input C2INB, remappable RPB2 and PORTB bit RB2.
173 EBIA7/AN47/HLVDIN/RPB9/PMA7/RB9 output External Bus Interface address bit 7 shared with ADC input AN47, HLVD input HLVDIN, remappable RPB9, PMP address PMA7 and PORTB bit RB9.
174 EBIA5/AN7/PMA5/RA5 output External Bus Interface address bit 5 shared with ADC input AN7, PMP address PMA5 and PORTA bit RA5.
175 AN2/C1INB/RB4 input ADC analog input AN2 shared with Comparator 1 selectable negative input C1INB and PORTB bit RB4.
176 No Connect unconnected No connect pin on the 176-pin LQFP package.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package LQFP-176(20x20)
Category Single Chip Microcomputer/Microcontroller
Pins 176

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, I/O (VDDIO) operating range VDDIO 2.2 3.6 V 738
Supply voltage, core (VDDCORE) operating range VDDCORE 1.7 1.9 V 738
Operating temperature range, Industrial TA -40 85 °C Industrial 738

CAD (KiCad official)

  • Symbol: PIC32MZ2064DAG176-I
  • Footprint: Package_QFP:LQFP-176_20x20mm_P0.4mm
  • 3D model: LQFP-176(20x20) (KiCad packages3D, STEP)
  • 3D model files: pic32mz2064dag176-i-2j-etched.step / pic32mz2064dag176-i-2j-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mz2064dag176-i-2j.step / pic32mz2064dag176-i-2j.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (832 pp, sha256 c0f74674e5c0fba7, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF