Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

KP106SPA

Kiwi Instruments · LED Drivers · SOP-8

KP106SPA from Kiwi Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP input Constant-current loop compensation pin; a 1-4.7uF ceramic capacitor to the chip reference ground is recommended, with COMP clamped between 0.7 V and 3 V.
2 GND power_in Chip reference ground.
3 VDD power_in Chip supply pin with normal operating voltage 10 to 13 V, undervoltage lockout at 7 to 9 V, and VDD DC supply rating of 14 V.
4 FB input Inductor current demagnetization detection and output overvoltage protection pin, with OVP threshold of 1.9 to 2.1 V.
5 CS input Current sense input pin with 300 ns leading-edge blanking time and peak current reference of 1.4 to 1.6 V.
6 GATE output Drive output for the high-voltage MOSFET, with GATE voltage rated -0.3 to 14 V.
7 NC unconnected Non-functional pin that is left floating in the application.
8 HV power_in Input for the internal high-voltage start-up and supply circuit, with HV voltage rated -0.3 to 600 V.

Key specifications

Parameter Value
Manufacturer Kiwi Instruments
Package SOP-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
HV 电压 -0.3 600 V 3
VDD 直流供电电压 14 V 3
VDD 直流箝位电流 10 mA 3
CS, FB, COMP 电压 -0.3 7 V 3
GATE 电压 -0.3 14 V 3
芯片工作结温 150 °C 3
储藏温度 -65 150 °C 3
ESD 能力 (人体模型) 3 kV 人体模型 3
管脚温度 (焊接 10 秒) 260 °C 焊接 10 秒 3
工作环境温度 -40 125 °C 3
VDD 正常工作电压 VDD_Op 10 11.5 13 V 3
VDD 欠压保护电压 VDD_OFF 7 8 9 V 3
工作电流 IVDD_Op 80 150 300 uA Fsw=7KHz 3
启动电流 IVDD_st 300 700 uA 3
过压保护阈值 VFB_OVP 1.9 2 2.1 V 3
最长关断时间 Toff_max 195 270 350 us 备注 2 not printed in row 4
峰值电流基准 Vcs(max) 1.4 1.5 1.6 V 4
恒流输出基准 VCC_REF 194 200 206 mV 4
HV 漏电流 IHV_leak 10 40 60 uA 4
COMP 高箝位电压 Vcomp_H 3 V 4
COMP 低箝位电压 Vcomp_L 0.7 V 4
过热保护阈值 TSD 150 °C 备注 2 4
HV 充电电流 IHV 10 mA Drain =20V 4
最短关断时间 Toff_min 2 us 备注 2 3
最长导通时间 Ton_max 40 us 备注 2 4
最高开关频率 Fmax 100 KHz 4
电流采样前沿消隐时间 TLEB 300 ns 4
过流检测延时 TD_OC 100 ns 4
VDD 箝位电压 VDD_Clamp 14 V I(VDD ) = 5 mA 3
消磁检测阈值 VFB_DEM 0.2 V 3
封装热阻---结到环境(SOP-8) 165 °C/W 结到环境 SOP-8 3

CAD (KiCad official)

  • Symbol: KP106SPA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: kp106spa-etched.step / kp106spa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); kp106spa.step / kp106spa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Kiwi Instruments datasheet, copy hosted by LCSC (6 pp, sha256 7802168d854d31f3, retrieved 2026-11-21)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF