3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F18446T-I
Microchip Tech · MICROCHIP · UQFN-20-EP(4x4)
PIC16F18446T-I from Microchip Tech, in a UQFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA3/MCLR/VPP | input | Input-only pin that functions as the Master Clear (MCLR) reset input when MCLRE is enabled and as the high-voltage programming pin VPP during HV programming. |
| 2 | RC5 | bidirectional | PORTC bit 5 that also provides analog input ANC5, MDCARH, Timer4 input T4IN and CCP1 input CCP1IN, with interrupt-on-change support. |
| 3 | RC4 | bidirectional | PORTC bit 4 that provides analog input ANC4 and interrupt-on-change support. |
| 4 | RC3 | bidirectional | PORTC bit 3 that provides analog input ANC3, comparator inputs C1IN3- and C2IN3-, CCP2 input CCP2IN and CLC input CLCIN1. |
| 5 | RC6 | bidirectional | PORTC bit 6 that provides analog input ANC6, MSSP slave select SS1 and interrupt-on-change support. |
| 6 | RC7 | bidirectional | PORTC bit 7 that provides analog input ANC7 and interrupt-on-change support. |
| 7 | RB7 | bidirectional | PORTB bit 7 that provides analog input ANB7, Timer6 input T6IN, SPI/I2C clock SCK2/SCL2 and EUSART clock CK1. |
| 8 | RB6 | bidirectional | PORTB bit 6 that provides analog input ANB6 and MSSP1 clock SCK1/SCL1 with interrupt-on-change support. |
| 9 | RB5 | bidirectional | PORTB bit 5 that provides analog input ANB5, CCP3 input CCP3IN, MSSP2 data SDI2/SDA2, EUSART receive RX1/DT1 and CLC input CLCIN3. |
| 10 | RB4 | bidirectional | PORTB bit 4 that provides analog input ANB4, Timer5 gate T5G, MSSP1 data SDI1/SDA1 and CLC input CLCIN2. |
| 11 | RC2 | bidirectional | PORTC bit 2 that provides analog input ANC2, ADC auto-conversion trigger ADACT, comparator inputs C1IN2- and C2IN2-, MDCARL and Timer5 clock T5CKI. |
| 12 | RC1 | bidirectional | PORTC bit 1 that provides analog input ANC1 and comparator inputs C1IN1- and C2IN1-. |
| 13 | RC0 | bidirectional | PORTC bit 0 that provides analog input ANC0, comparator input C2IN0+, Timer3 clock T3CKI and Timer3 gate T3G. |
| 14 | RA2 | bidirectional | PORTA bit 2 that provides analog input ANA2, ADC negative reference ADCVREF-, DAC1 negative reference DAC1VREF-, Timer0 clock T0CKI, CWG inputs, ZCD1 and external interrupt INT. |
| 15 | RA1 | bidirectional | PORTA bit 1 that provides analog input ANA1, ADC positive reference ADCVREF+, comparator inputs C1IN0- and C2IN0-, DAC1 positive reference DAC1VREF+ and ICD/ICSP clock ICDCLK/ICSPCLK. |
| 16 | RA0 | bidirectional | PORTA bit 0 that provides analog input ANA0, comparator input C1IN0+, DAC1OUT1 output and ICD/ICSP data ICDDAT/ICSPDAT. |
| 17 | VSS | power_in | Device ground supply pin; the datasheet recommends connecting the exposed bottom pad to VSS. |
| 18 | VDD | power_in | Positive device supply pin, to be decoupled to VSS with capacitors placed as close to the pins as possible. |
| 19 | RA5/CLKIN/OSC1 | bidirectional | PORTA bit 5 that provides analog input ANA5, Timer1 clock T1CKI, Timer2 input T2IN, SMT1 signal SMT1SIG and the external clock/oscillator input CLKIN/SOSCI/OSC1. |
| 20 | RA4/CLKOUT/OSC2 | bidirectional | PORTA bit 4 that provides analog input ANA4, Timer1 gate T1G, SMT1 window SMT1WIN, CCP4 input CCP4IN and the clock output/oscillator pin CLKOUT/SOSCO/OSC2. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | UQFN-20-EP(4x4) |
| Category | Embedded Processors & Controllers |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | PIC16F18426/46 (non-LF) device | 629 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 629 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | max = VDD + 0.3 V (expression as printed) | 629 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 629 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | |||
| Maximum current on VDD pin | 85 | mA | 85°C < TA ≤ +125°C | 629 | |||
| Maximum current on any standard I/O pin | -50 | 50 | mA | printed ±50 mA | 629 | ||
| Clamp current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 629 | |
| Total power dissipation | 800 | mW | 629 | ||||
| Operating supply voltage VDD | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 632 | |
| Operating supply voltage VDD | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz | 632 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 632 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 632 | ||
| Supply current, XT = 4 MHz | IDDXT4 | 515 | 710 | µA | XT = 4 MHz; VDD 3.0V | 634 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 2.2 | 2.7 | mA | HFINTOSC = 16 MHz; VDD 3.0V | 634 | |
| Supply current, HFINTOSC = 32 MHz PLL | IDDHFOPLL | 4 | 4.9 | mA | HFINTOSC = 32 MHz; VDD 3.0V | 634 | |
| Supply current, HS + PLL = 32 MHz | IDDHSPLL32 | 3.7 | 4.5 | mA | HS+PLL = 32 MHz; VDD 3.0V | 634 | |
| Supply current, IDLE mode | IDDIDLE | 1.6 | 2 | mA | IDLE mode, HFINTOSC = 16 MHz; VDD 3.0V | 634 | |
| Power-down current, IPD base | IPD | 0.4 | 2.5 | µA | VREGPM = 1; VDD 3.0V; max at +125°C = 8 µA | 636 | |
| Power-down current, IPD base (VREGPM = 0) | IPD | 18 | 25 | µA | VREGPM = 0; VDD 3.0V; max at +125°C = 30 µA | 636 | |
| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT | 1 | 2.9 | µA | VDD 3.0V; max at +125°C = 9 µA | 636 | |
| Power-down current, Secondary Oscillator (SOSC) | IPD_SOSC | 1.2 | 4.3 | µA | VDD 3.0V; max at +125°C = 9.2 µA | 636 | |
| Power-down current, FVR | IPD_FVR | 40 | 69 | µA | VDD 3.0V; max at +125°C = 70 µA | 636 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 11 | 16 | µA | VDD 3.0V; max at +125°C = 19 µA | 636 | |
| Power-down current, ADC non-converting | IPD_ADCA | 0.38 | 2.5 | µA | VDD 3.0V; ADC not converting; max at +125°C = 8.0 µA | 636 | |
| Power-down current, Comparator | IPD_CMP | 31 | 58 | µA | VDD 3.0V; max at +125°C = 59 µA | 636 | |
| Input low voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 637 | ||
| Input low voltage, I/O port with SMBus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 637 | ||
| Input high voltage, I/O port with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 637 | ||
| Input high voltage, I/O port with SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 637 | ||
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 637 |
| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 637 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 637 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 637 |
| Output low voltage, standard I/O ports | VOL | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 637 | ||
| Pin capacitance, all I/O pins | CIO | 5 | 50 | pF | 637 | ||
| ECL oscillator clock frequency | FECL | 500 | kHz | 641 | |||
| ECM oscillator clock frequency | FECM | 4 | MHz | 641 | |||
| ECH oscillator clock frequency | FECH | 32 | MHz | 641 | |||
| LP oscillator clock frequency | FLP | 100 | kHz | Note 4 (crystal or resonator required) | 641 | ||
| XT oscillator clock frequency | FXT | 4 | MHz | Note 4 (crystal or resonator required) | 641 | ||
| HS oscillator clock frequency | FHS | 20 | MHz | Note 4 (crystal or resonator required) | 641 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 641 |
| System clock frequency | FOSC | 32 | MHz | Note 2, Note 3 | 641 | ||
| Instruction period | TCY | 125 | ns | 642 | |||
| PLL input frequency range | FPLLIN | 4 | 16 | MHz | 643 | ||
| PLL output frequency range | FPLLOUT | 16 | 32 | MHz | Note 1 (must meet FOSC requirement) | 643 | |
| Voltage on MCLR/VPP pin to enter programming mode | VIHH | 8 | 9 | V | Note 2, Note 3 | 638 | |
| Supply current during programming operation | IDDPGM | 10 | mA | 638 | |||
| Thermal resistance junction to ambient, 20-pin UQFN 4x4mm | θJA | 43 | °C/W | Operating temperature -40°C ≤ TA ≤ +125°C | 639 | ||
| Thermal resistance junction to case, 20-pin UQFN 4x4mm | θJC | 5.3 | °C/W | Operating temperature -40°C ≤ TA ≤ +125°C | 640 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 640 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 267 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
PIC16F18446T-I - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: UQFN-20-EP(4x4), generated on the KiCad land (body 4 x 4 mm, terminals on the pads, 0.5 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pic16f18446t-i-gz-etched.step/pic16f18446t-i-gz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f18446t-i-gz.step/pic16f18446t-i-gz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (708 pp, sha256
3f4a8be840a03f4d, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).