3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOR-0631-TA1
Orient · Optocouplers - Logic Output · SO-8
OR-0631-TA1 from Orient, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of input LED channel 1; recommended input high-level current IFH is 5 to 15 mA, absolute max average forward current 15 mA. |
| 2 | Cathode | passive | Cathode of input LED channel 1; reverse input voltage must not exceed 5 V. |
| 3 | Cathode | passive | Cathode of input LED channel 2; reverse input voltage must not exceed 5 V. |
| 4 | Anode | passive | Anode of input LED channel 2; recommended input high-level current IFH is 5 to 15 mA, absolute max average forward current 15 mA. |
| 5 | GND | power_in | Ground for the output detector side, isolated from the input side (isolation 3750 Vrms). |
| 6 | Vout 2 | output | Logic gate open-collector output of channel 2, inverting (low when input is high), needs pull-up RL of 330 to 4000 ohm and max 50 mA collector current. |
| 7 | Vout 1 | output | Logic gate open-collector output of channel 1, inverting (low when input is high), needs pull-up RL of 330 to 4000 ohm and max 50 mA collector current. |
| 8 | VCC | power_in | Supply voltage for the output detector, recommended 4.5 to 5.5 V with absolute maximum 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Orient |
| Package | SO-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current Low Level | IFL | 0 | 250 | µA | 3 | ||
| Input Current High Level | IFH | 5 | 15 | mA | 3 | ||
| Power Supply Voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| Low Level Enable Voltage | VEL | 0 | 0.8 | V | 3 | ||
| High Level Enable Voltage | VEH | 2 | V | 3 | |||
| Operating Temperature | TA | -40 | 105 | °C | 3 | ||
| Fan Out | N | 5 | TTL Loads | RL = 1 k | 3 | ||
| Output Pull-up Resistor | RL | 330 | 4000 | 3 | |||
| Average Forward Input Current | IF | 15 | mA | Ta=25℃ | 3 | ||
| Reverse Input Voltage | VR | 5 | V | Ta=25℃ | 3 | ||
| Power Dissipation | PI | 40 | mW | Ta=25℃ | 3 | ||
| Output Collector Current | IO | 50 | mA | Ta=25℃ | 3 | ||
| Output Collector Voltage | VO | 7 | V | Ta=25℃ | 3 | ||
| Output Collector Power Dissipation | PO | 60 | mW | Ta=25℃ | 3 | ||
| Supply Voltage | VCC | 7 | V | Ta=25℃ | 3 | ||
| Insulation Voltage | Viso | 3750 | Vrms | AC for 1 minute, R.H.= 40 ~ 60% R.H. | 3 | ||
| Working Temperature | Topr | -40 | 105 | ℃ | 3 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Soldering Temperature | Tsol | 260 | ℃ | soldering time is 10 seconds | 3 | ||
| Forward Voltage | VF | 1.8 | V | IF= 10mA | 4 | ||
| Reverse Voltage | BVR | 5 | V | IR = 10μA | 4 | ||
| Input Threshold Current | ITH | 2.7 | 5 | mA | VCC=5.5V; VO=0.6V; IOL(sinking) =13mA | 4 | |
| High Level Supply Current | ICCH | 13 | 18 | mA | VCC=5.5V, IF=0mA | 4 | |
| Low Level Supply Current | ICCL | 15 | 21 | mA | VCC=5.5V, IF=10mA | 4 | |
| High Level Output Current | IOH | 1 | 100 | μA | VCC=5.5V; VO=5.5V; IF=250μA | 4 | |
| Low Level Output Voltage | VOL | 0.27 | 0.6 | V | VCC=5.5V; IF=5mA; IOL (Sinking) =13mA | 4 | |
| Propagation delay time to output High level | tPLH | 25 | 44 | 90 | ns | RL=350Ω; CL=15pF | 5 |
| Propagation delay time to output Low level | tPHL | 25 | 24 | 75 | ns | 5 | |
| Logic High Common Mode Transient Immunity | /CMH/ | 10 | 15 | kV/μs | VCC=5V,VCM=1000V, RL=350Ω,VO(MIN)=2V, IF=0mA,TA=25℃ | 5 | |
| Logic Low Common Mode Transient Immunity | /CML/ | 10 | 15 | kV/μs | VCC=5V,IF=7.5mA, VO(MIN) =0.8V,VCM=1000V, RL=350Ω ,TA=25℃ | 5 |
CAD (KiCad official)
- Symbol:
OR-0631-TA1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
or-0631-ta1-etched.step/or-0631-ta1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);or-0631-ta1.step/or-0631-ta1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Orient datasheet (16 pp, sha256
68722ee1d268e868, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).