component
M24512-DRDW3TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM24512-DRDW3TP
STMicroelectronics · EEPROM · TSSOP-8
M24512-DRDW3TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input that sets bit b1 of the 7-bit device select code and must be tied to VCC or VSS; when left floating it is read as low (0). |
| 2 | E1 | input | Chip Enable input that sets bit b2 of the 7-bit device select code and must be tied to VCC or VSS; when left floating it is read as low (0). |
| 3 | E2 | input | Chip Enable input that sets bit b3 of the 7-bit device select code and must be tied to VCC or VSS; when left floating it is read as low (0). |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O, an open-drain output that may be wire-OR'ed on the bus and requires a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input that strobes the data on SDA (in) and clocks data out on SDA (out). |
| 7 | WC | input | Write Control input; when driven high, write operations to the entire memory array are disabled and data bytes are not acknowledged, while low or floating enables writes. |
| 8 | VCC | power_in | Supply voltage pin, 1.7 V to 5.5 V operating range with ambient temperature -40 °C to 125 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24512-DRDW3TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24512-drdw3tp-etched.step/m24512-drdw3tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24512-drdw3tp.step/m24512-drdw3tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (41 pp, sha256
7c547459c2c15e88, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).