Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC74HC161ADG

onsemi · Counters / Dividers · SOIC-16

MC74HC161ADG from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RESET input Low level resets the internal flip-flops and forces Q0 through Q3 low; on the HC161A this reset is asynchronous.
2 CLOCK input Internal flip-flops toggle and the output count advances on the rising edge of the Clock input.
3 P0 input Preset data input P0, the least-significant bit, loaded synchronously when Load is low.
4 P1 input Preset data input P1, loaded synchronously into the flip-flops on the rising clock edge when Load is low.
5 P2 input Preset data input P2, loaded synchronously into the flip-flops on the rising clock edge when Load is low.
6 P3 input Preset data input P3, the most-significant bit, loaded synchronously when Load is low.
7 ENABLE P input Count-enable control; the device counts only when Enable P, Enable T and Load are all high.
8 GND power_in Ground reference for the device (pin 8 = GND); all voltages are referenced to GND.
9 LOAD input A low level on Load, sampled on the rising clock edge, loads P0 to P3 into the outputs and disables counting.
10 ENABLE T input Count-enable and ripple-carry control; must be high together with Enable P and Load to count.
11 Q3 output Counter output Q3, the most-significant bit.
12 Q2 output Counter output Q2 of the 4-bit binary count.
13 Q1 output Counter output Q1 of the 4-bit binary count.
14 Q0 output Counter output Q0, the least-significant bit.
15 RIPPLE CARRY OUT output Goes high only when the counter is in its maximum state 1111 with Enable T high, providing a carry for cascaded counters.
16 VCC power_in Positive supply (pin 16 = VCC); recommended operating range 2.0 V to 6.0 V referenced to GND.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-16
Category Logic ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Supply Voltage VCC -0.5 7 V Maximum Ratings 3
DC Input Voltage VI -0.5 V Maximum; upper limit VCC+0.5 V as printed 3
DC Output Voltage VO -0.5 V Maximum; upper limit VCC+0.5 V as printed (Note 1) 3
DC Input Diode Current IIK 20 mA 3
DC Output Diode Current IOK 25 mA 3
DC Output Sink Current IO 25 mA 3
DC Supply Current per Supply Pin ICC 50 mA 3
DC Ground Current per Ground Pin IGND 50 mA 3
Storage Temperature Range TSTG -65 150 C 3
Lead Temperature TL 260 C 1 mm from case for 10 seconds 3
Junction Temperature Under Bias TJ 150 C 3
Power Dissipation in Still Air at 85C PD 500 mW SOIC package at 85C 3
ESD Withstand Voltage, Human Body Model VESD 2000 V Human Body Model (Note 2) 3
ESD Withstand Voltage, Machine Model VESD 200 V Machine Model (Note 3) 3
Thermal Resistance, Junction-to-Ambient θJA 112 C/W SOIC package 3
DC Supply Voltage VCC 2 6 V Referenced to GND 3
DC Input Voltage, Output Voltage Vin, Vout 0 V Referenced to GND; maximum VCC as printed 3
Operating Temperature, All Package Types TA -55 125 C 3
Input Rise and Fall Time tr, tf 0 1000 ns VCC=2.0 V (Figure 4) 3
Input Rise and Fall Time tr, tf 0 600 ns VCC=3.0 V (Figure 4) 3
Input Rise and Fall Time tr, tf 0 500 ns VCC=4.5 V (Figure 4) 3
Input Rise and Fall Time tr, tf 0 400 ns VCC=6.0 V (Figure 4) 3
Minimum High-Level Input Voltage VIH 1.5 V VCC=2.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Input Voltage VIH 2.1 V VCC=3.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Input Voltage VIH 3.15 V VCC=4.5 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Input Voltage VIH 4.2 V VCC=6.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Maximum Low-Level Input Voltage VIL 0.5 V VCC=2.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Maximum Low-Level Input Voltage VIL 0.9 V VCC=3.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Maximum Low-Level Input Voltage VIL 1.35 V VCC=4.5 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Maximum Low-Level Input Voltage VIL 1.8 V VCC=6.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Output Voltage VOH 1.9 V VCC=2.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Output Voltage VOH 4.4 V VCC=4.5 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Output Voltage VOH 5.9 V VCC=6.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C 4
Minimum High-Level Output Voltage VOH 2.48 V VCC=3.0 V; Vin=VIH or VIL; /Iout/<=3.6 mA; -55 to 25 C 4
Minimum High-Level Output Voltage VOH 3.98 V VCC=4.5 V; Vin=VIH or VIL; /Iout/<=4.0 mA; -55 to 25 C 4
Minimum High-Level Output Voltage VOH 5.48 V VCC=6.0 V; Vin=VIH or VIL; /Iout/<=5.2 mA; -55 to 25 C 4
Maximum Low-Level Output Voltage VOL 0.1 V VCC=2.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C 4
Maximum Low-Level Output Voltage VOL 0.26 V VCC=3.0 V; Vin=VIH or VIL; /Iout/<=3.6 mA; -55 to 25 C 4
Maximum Input Leakage Current Iin -0.1 0.1 uA Vin=VCC or GND; VCC=6.0 V; -55 to 25 C 4
Maximum Quiescent Supply Current ICC 4 uA Vin=VCC or GND; Iout=0 uA; VCC=6.0 V; -55 to 25 C 4
Maximum Clock Frequency (50% Duty Cycle) fmax 6 MHz VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Clock Frequency (50% Duty Cycle) fmax 15 MHz VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Clock Frequency (50% Duty Cycle) fmax 30 MHz VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Clock Frequency (50% Duty Cycle) fmax 35 MHz VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPLH) tPLH 120 ns VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPLH) tPLH 75 ns VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPLH) tPLH 20 ns VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPLH) tPLH 16 ns VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPHL) tPHL 145 ns VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPHL) tPHL 100 ns VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPHL) tPHL 22 ns VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Propagation Delay, Clock to Q (tPHL) tPHL 18 ns VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C 5
Maximum Input Capacitance Cin 10 pF Figure 4, 10; -55 to 25 C 5

CAD (KiCad official)

  • Symbol: MC74HC161ADG
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: mc74hc161adg-etched.step / mc74hc161adg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc74hc161adg.step / mc74hc161adg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (17 pp, sha256 ed9373a896dd3be7, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF