component
SN65LVDS32BDR
Public Made by Adomby adom
Texas Instruments LVDS ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65LVDS32BDR
Texas Instruments · LVDS ICs · SOIC-16
SN65LVDS32BDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Inverting differential receiver input of channel 1; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 2 | 1A | input | Non-inverting differential receiver input of channel 1; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 3 | 1Y | output | Receiver output of channel 1; VOH is at least 2.4 V at IOH = -4 mA and VOL is at most 0.4 V at IOL = 4 mA. |
| 4 | G | input | Receiver enable for channels 1 and 2; enable input levels are VIH 2 V minimum and VIL 0.8 V maximum, and the output goes high impedance when disabled. |
| 5 | 2Y | output | Receiver output of channel 2; VOH is at least 2.4 V at IOH = -4 mA and VOL is at most 0.4 V at IOL = 4 mA. |
| 6 | 2A | input | Non-inverting differential receiver input of channel 2; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 7 | 2B | input | Inverting differential receiver input of channel 2; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 8 | GND | power_in | Device ground; all voltages except differential bus voltages are referenced to this network ground terminal. |
| 9 | 3B | input | Inverting differential receiver input of channel 3; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 10 | 3A | input | Non-inverting differential receiver input of channel 3; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 11 | 3Y | output | Receiver output of channel 3; VOH is at least 2.4 V at IOH = -4 mA and VOL is at most 0.4 V at IOL = 4 mA. |
| 12 | G | input | Receiver enable for channels 3 and 4; enable input levels are VIH 2 V minimum and VIL 0.8 V maximum, and the output goes high impedance when disabled. |
| 13 | 4Y | output | Receiver output of channel 4; VOH is at least 2.4 V at IOH = -4 mA and VOL is at most 0.4 V at IOL = 4 mA. |
| 14 | 4A | input | Non-inverting differential receiver input of channel 4; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 15 | 4B | input | Inverting differential receiver input of channel 4; recommended bus voltage range is -2 V to 4.4 V, with absolute maximum -4 V to 6 V. |
| 16 | VCC | power_in | Supply voltage, 3 V to 3.6 V (nominal 3.3 V); absolute maximum is -0.5 V to 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN65LVDS32BDR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds32bdr-etched.step/sn65lvds32bdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds32bdr.step/sn65lvds32bdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
a6fe6aaf7a83af37, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).