component
ME6215C30M5G
Public Made by Adomby adom
MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownME6215C30M5G
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
ME6215C30M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input for the regulator, rated for input voltage up to 18 V (absolute maximum 18 V). |
| 2 | VSS | power_in | Ground pin; the VOUT and CE absolute maximum ratings are referenced to VSS (VSS-0.3 V to VIN+0.3 V). |
| 3 | CE | input | Active-high ON/OFF control: CE above 1.3 V starts the regulator and CE below 0.8 V shuts it down; absolute maximum range is VSS-0.3 V to VIN+0.3 V. |
| 4 | NC | unconnected | No connect pin with no function listed in the datasheet pin assignment. |
| 5 | VOUT | power_out | Regulated output with absolute maximum range VSS-0.3 V to VIN+0.3 V; absolute maximum output current is 580 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (ME6215C30, VOUT 3.0 V) | VOUT | -2 | 2 | % | Printed as ±2% in Features (Highly Accurate) | 1 | |
| Load Regulation | ΔVOUT | 4 | mV | VIN= VOUT+1V, 1mA≤IOUT≤100mA | 4 | ||
| Line Regulation | ΔVOUT | 20 | mV | IOUT =30mA, VOUT+1V≤VIN≤18V | 4 | ||
| Dropout Voltage | VDIF1 | 160 | mV | IOUT =100mA | 4 | ||
| Dropout Voltage | VDIF2 | 320 | mV | IOUT =200mA | 4 | ||
| Supply Current | ISS | 6 | 10 | μA | VIN= VOUT+1V | 4 | |
| Stand-by Current | ICEL | 0 | 1 | μA | VCE＝0V | 4 | |
| CE High Voltage | VCEH | 1.3 | V | Start up | 4 | ||
| CE Low Voltage | VCEL | 0.8 | V | Shut down | 4 | ||
| Short-circuit Current | ISHORT | 25 | 50 | mA | VIN= VOUT+1V, VCE＝VIN, VOUT＝0V | 4 | |
| Over Current Protection | Ilimit | 580 | mA | VIN= VOUT+1V | 4 | ||
| Input Voltage | VIN | 18 | V | 4 | |||
| Maximum Output Current | IOUTMAX | 300 | mA | VIN= VOUT+1V | 4 | ||
| Input Voltage (absolute maximum) | VIN | 18 | V | 4 | |||
| Output Current (absolute maximum) | IOUT | 580 | mA | 4 | |||
| Power Dissipation SOT23-5 | PD | 250 | mW | SOT23-5 | 4 | ||
| Operating Temperature Range | TOPR | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TSTG | -40 | 150 | °C | 4 | ||
| Lead Temperature | 260 | °C | 4 sec | 4 | |||
| Nominal output voltage (ME6215C30M5G) | VOUT | 3 | V | Selection guide: VOUT =3.0V, SOT23-5 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro | 7 |
CAD (KiCad official)
- Symbol:
ME6215C30M5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
me6215c30m5g-etched.step/me6215c30m5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me6215c30m5g.step/me6215c30m5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (7 pp, sha256
b37d57290e3a1d7d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).