Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1937-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)

PIC16F1937-E from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT/P3B/SEG8 bidirectional General purpose I/O (Schmitt-trigger input, CMOS output) that also carries EUSART asynchronous receive RX, synchronous data DT, PWM output P3B and LCD analog output SEG8.
2 RD4/CPS12/P2D/SEG17 bidirectional General purpose I/O of PORTD (available on PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS12, PWM output P2D and LCD analog output SEG17.
3 RD5/CPS13/P1B/SEG18 bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS13, PWM output P1B and LCD analog output SEG18.
4 RD6/CPS14/P1C/SEG19 bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS14, PWM output P1C and LCD analog output SEG19.
5 RD7/CPS15/P1D/SEG20 bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS15, PWM output P1D and LCD analog output SEG20.
6 VSS power_in Ground reference.
7 VDD power_in Positive supply.
8 SEG0/INT/SRI/CPS0/AN12/RB0 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also external interrupt INT, A/D channel 12, capacitive sensing input CPS0 and LCD analog output SEG0.
9 VLCD1/CPS1/C12IN3-/AN10/RB1 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also LCD analog input VLCD1, capacitive sensing input CPS1, comparator negative input C12IN3- and A/D channel 10.
10 VLCD2/CPS2/AN8/RB2 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also LCD analog input VLCD2, capacitive sensing input CPS2 and A/D channel 8.
11 RB3/AN9/C12IN2-/CPS3/CCP2/P2A/VLCD3 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also LCD analog input VLCD3, CCP2 and P2A PWM output, capacitive sensing input CPS3, comparator negative input C12IN2- and A/D channel 9.
12 NC unconnected Marked NC (no connect) in the 44-pin TQFP pin diagram; no function is assigned to this pin.
13 NC unconnected Marked NC (no connect) in the 44-pin TQFP pin diagram; no function is assigned to this pin.
14 COM0/CPS4/AN11/RB4 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also LCD common output COM0, capacitive sensing input CPS4 and A/D channel 11.
15 RB5/AN13/CPS5/CCP3/P3A/T1G/COM1 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also LCD common output COM1, Timer1 gate input T1G, PWM output P3A, CCP3, capacitive sensing input CPS5 and A/D channel 13.
16 SEG14/ICDCLK/ICSPCLK/RB6 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also serial programming clock ICSPCLK, in-circuit debug clock ICDCLK and LCD analog output SEG14.
17 SEG13/ICDDAT/ICSPDAT/RB7 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also ICSP data I/O ICSPDAT, in-circuit debug data ICDDAT and LCD analog output SEG13.
18 VPP/MCLR/RE3 input General purpose input (RE3, TTL) that is also the Master Clear input MCLR with internal pull-up when enabled, and the high-voltage programming supply VPP.
19 SEG12/VCAP/SS/SRNQ/C2OUT/C12IN0-/AN0/RA0 bidirectional General purpose I/O that also provides A/D channel 0, comparator C1/C2 negative input C12IN0-, comparator C2 output, SR latch inverting output, SPI slave select SS, LCD analog output SEG12 and voltage regulator filter capacitor VCAP (PIC16F1934/6/7 only); the alternate functions are selectable via APFCON.
20 SEG7/C12IN1-/AN1/RA1 bidirectional General purpose I/O that also provides A/D channel 1, comparator negative input C12IN1- and LCD analog output SEG7.
21 COM2/DACOUT/VREF-/C2IN+/AN2/RA2 bidirectional General purpose I/O that also provides A/D channel 2, A/D negative voltage reference VREF-, comparator C2 positive input C2IN+, DAC voltage reference output DACOUT and LCD analog output COM2.
22 SEG15/VREF+/C1IN+/AN3/RA3 bidirectional General purpose I/O that also provides A/D channel 3, A/D positive voltage reference VREF+, comparator C1 positive input C1IN+ and LCD analog output SEG15.
23 RA4/C1OUT/CPS6/T0CKI/SRQ/SEG4 bidirectional General purpose I/O (CMOS output) that also provides capacitive sensing input CPS6, comparator C1 output C1OUT, Timer0 clock input T0CKI, SR latch non-inverting output SRQ and LCD analog output SEG4.
24 SEG5/VCAP/SS/SRNQ/CPS7/C2OUT/AN4/RA5 bidirectional General purpose I/O that also provides A/D channel 4, capacitive sensing input CPS7, comparator C2 output, SR latch inverting output SRNQ, SPI slave select SS, LCD analog output SEG5 and voltage regulator filter capacitor VCAP (PIC16F1934/6/7 only).
25 RE0/AN5/CCP3/P3A/SEG21 bidirectional General purpose I/O of PORTE (PIC16(L)F1934/7 only) that also provides A/D channel 5, PWM output P3A, CCP3 and LCD analog output SEG21.
26 SEG22/P3B/AN6/RE1 bidirectional General purpose I/O of PORTE (PIC16(L)F1934/7 only) that also provides A/D channel 6, PWM output P3B and LCD analog output SEG22.
27 SEG23/CCP5/AN7/RE2 bidirectional General purpose I/O of PORTE (PIC16(L)F1934/7 only) that also provides A/D channel 7, CCP5 and LCD analog output SEG23.
28 VDD power_in Positive supply.
29 VSS power_in Ground reference.
30 SEG2/CLKIN/OSC1/RA7 bidirectional General purpose I/O that also serves as crystal/resonator input OSC1 (LP, XT, HS modes), external clock input CLKIN (EC mode) or RC/INTOSC function depending on FOSC, and LCD analog output SEG2.
31 SEG1/VCAP/CLKOUT/OSC2/RA6 bidirectional General purpose I/O that also serves as crystal/resonator output OSC2 (LP, XT, HS modes), FOSC/4 output CLKOUT, LCD analog output SEG1 and voltage regulator filter capacitor VCAP (PIC16F1934/6/7 only).
32 RC0/T1OSO/T1CKI/P2B bidirectional General purpose I/O (Schmitt-trigger input, CMOS output) that also provides Timer1 oscillator connection T1OSO, Timer1 clock input T1CKI and PWM output P2B.
33 NC unconnected Marked NC (no connect) in the 44-pin TQFP pin diagram; no function is assigned to this pin.
34 NC unconnected Marked NC (no connect) in the 44-pin TQFP pin diagram; no function is assigned to this pin.
35 RC1/T1OSI/CCP2/P2A bidirectional General purpose I/O (Schmitt-trigger input, CMOS output) that also provides Timer1 oscillator connection T1OSI, Capture/Compare/PWM2 CCP2 and PWM output P2A.
36 RC2/CCP1/P1A/SEG3 bidirectional General purpose I/O (Schmitt-trigger input, CMOS output) that also provides Capture/Compare/PWM1 CCP1, PWM output P1A and LCD analog output SEG3.
37 RC3/SCK/SCL/SEG6 bidirectional General purpose I/O that also provides SPI clock SCK, I2C clock SCL (open-drain) and LCD analog output SEG6.
38 RD0/CPS8/COM3 bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS8 and LCD analog output COM3.
39 RD1/CPS9/CCP4 bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS9 and Capture/Compare/PWM4 CCP4.
40 RD2/CPS10/P2B bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS10 and PWM output P2B.
41 RD3/CPS11/P2C/SEG16 bidirectional General purpose I/O of PORTD (PIC16(L)F1934/7 only) that also provides capacitive sensing input CPS11, PWM output P2C and LCD analog output SEG16.
42 RC4/SDI/SDA/T1G/SEG11 bidirectional General purpose I/O (Schmitt-trigger input, CMOS output) that also provides SPI data input SDI, I2C data SDA (open-drain), Timer1 gate input T1G and LCD analog output SEG11.
43 RC5/SDO/SEG10 bidirectional General purpose I/O that also provides SPI data output SDO (CMOS) and LCD analog output SEG10.
44 RC6/TX/CK/SEG9 bidirectional General purpose I/O that also provides EUSART asynchronous transmit TX, synchronous clock CK and LCD analog output SEG9.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 379
Storage temperature -65 150 °C 379
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 379
Voltage on VCAP pin with respect to VSS VCAP -0.3 4 V 379
Voltage on MCLR with respect to VSS MCLR -0.3 9 V 379
Voltage on all other pins with respect to VSS -0.3 V Upper limit printed as VDD + 0.3V 379
Maximum current out of VSS pin 105 mA -40°C ≤ TA ≤ +125°C for extended 379
Maximum current into VDD pin 70 mA -40°C ≤ TA ≤ +125°C for extended 379
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 379
Maximum output current sunk by any I/O pin 25 mA 379
Maximum output current sourced by any I/O pin 25 mA 379
Supply Voltage VDD 1.8 5.5 V FOSC ≤ 16 MHz 382
Supply Voltage VDD 2.3 5.5 V FOSC ≤ 32 MHz (Note 2) 382
RAM Data Retention Voltage VDR 1.7 V Device in Sleep mode 382
Fixed Voltage Reference Voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 382
Fixed Voltage Reference Voltage for Comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 382
Fixed Voltage Reference Voltage for LCD Bias VLCDFVR -11 10 % 3.072V, VDD ≥ 3.6V 382
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 6.1 Power-on Reset (POR) 382
Brown-out Reset Voltage VBOR 2.38 2.5 2.73 V BORV=2.5V 399
Brown-out Reset Voltage VBOR 1.8 1.9 2.11 V BORV=1.9V 399
Brown-out Reset Hysteresis VHYST 0 25 60 mV -40°C to +85°C 399
MCLR Pulse Width (low) TMCL 2 µs 399
Low-Power Watchdog Timer Time-out Period TWDTLP 10 16 27 ms VDD = 3.3V-5V; 1:16 Prescaler used 399
Power-up Timer Period, PWRTE = 0 TPWRT 40 65 140 ms PWRTE = 0 399
I/O high-impedance from MCLR Low or Watchdog Timer Reset TIOZ 2 µs 399
Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 389
Weak Pull-up Current IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 389
Input Low Voltage, I/O port with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 389
Input High Voltage, I/O port with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 389
Input Low Voltage, I/O port with SMBus levels VIL 0.8 V 2.7V ≤ VDD ≤ 5.5V 389
Input High Voltage, I/O port with SMBus levels VIH 2.1 V 2.7V ≤ VDD ≤ 5.5V 389
Input Leakage Current, I/O ports IIL -125 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 85°C 389
Input Leakage Current, I/O ports IIL -1000 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 125°C 389
Input Leakage Current, MCLR IIL -200 200 nA VSS ≤ VPIN ≤ VDD @ 85°C 389
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V 389
Capacitive Loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 389
Capacitive Loading, All I/O pins CIO 50 pF 389
VDD for Bulk Erase VDD 2.7 V 391
Data EEPROM Byte Endurance ED 100 K E/W -40C to +85C 391
Program Flash Cell Endurance EP 10 K E/W -40C to +85C (Note 1) 391
External CLKIN Frequency, EC Oscillator mode (high) FOSC 20 MHz EC Oscillator mode (high) 394
Oscillator Frequency, HS Oscillator mode FOSC 1 20 MHz HS Oscillator mode, VDD > 2.7V 394
Oscillator Frequency, XT Oscillator mode FOSC 0.1 4 MHz XT Oscillator mode 394
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -2 2 % 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V 395
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -3 3 % 60°C ≤ TA ≤ 85°C, VDD ≥ 2.5V 395
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -5 5 % -40°C ≤ TA ≤ +125°C 395
Oscillator Frequency Range (PLL input) F10 4 8 MHz 395
On-Chip VCO System Frequency F11 16 32 MHz 395
CLKOUT Stability (Jitter) F13 -0.25 0.25 % 395
HFINTOSC Wake-up from Sleep Start-up Time TIOSC ST 3.2 8 µs 395
Integral Error EIL -1.7 1.7 LSb VREF = 3.0V 401
Offset Error EOFF -2.5 2.5 LSb VREF = 3.0V 401
Thermal Resistance Junction to Ambient, 44-pin TQFP package JA 46 °C/W 44-pin TQFP package 392
Thermal Resistance Junction to Case, 44-pin TQFP package JC 14.5 °C/W 44-pin TQFP package 392
Maximum Junction Temperature TJMAX 150 °C 392

CAD (KiCad official)

  • Symbol: PIC16F1937-E
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic16f1937-e-etched.step / pic16f1937-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1937-e.step / pic16f1937-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (472 pp, sha256 9250c7993972a4aa, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF