Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX1039A-AGC

HEXIN · DC-DC Converters · SOP-8

HX1039A-AGC from HEXIN, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No Connect. Leave floating or tie to ground per board layout preference.
2 VIN power_in Main supply input, 5V to 16V unregulated (absolute max 20V). Must be closely decoupled to GND with a 20µF or greater ceramic capacitor to prevent large voltage spikes at the input.
3 SW output Switch node connection to the external inductor. Connects to the drains of the internal main and synchronous power MOSFET switches; high-frequency voltage swing node, keep trace area small.
4 GND power_in Ground return pin for the device.
5 FB input Feedback input. Receives the divided output voltage from an external resistive divider; internal reference is 0.8V typical. Output voltage set by VOUT = 0.8V * [1 + (R2/R3)].
6 COMP output Output of the internal transconductance error amplifier and input to the current comparator. Frequency compensation is achieved by connecting a series R-C network from this pin to ground.
7 EN input Enable / ON-OFF control input (active high). Forcing this pin above 1V enables the part; forcing below 0.7V shuts down the device. Do not leave EN floating.
8 NC unconnected No Connect. Leave floating or tie to ground per board layout preference.

Key specifications

Parameter Value
Manufacturer HEXIN
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • HX1039A-AGC

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 5 16 V 3
Output Voltage VOUT 1.2 16 V 3
VIN Pin Voltage VIN -0.3 20 V 2
SW Pin Voltage SW -0.3 V Printed maximum is (VIN+0.3)V 2
FB Pin Voltage FB -0.3 6 V 2
Operating Temperature Range -40 85 °C Note 2: guaranteed to meet performance specifications from 0°C to 70°C; -40°C to 85°C assured by design, characterization and SPC correlation 2
Storage Temperature Range -65 150 °C 2
Junction Temperature Range -40 125 °C 2
Lead Temperature (Soldering) 265 °C Soldering 10 sec 2
Quiescent Current IQ 800 μA VOUT = 5V, ILOAD = 0A 3
Shutdown Current IOFF 50 μA VEN = 0V, VIN = 12V 3
Feedback Voltage VFB 0.8 V TA = 25℃ 3
Oscillator Frequency fOSC 400 kHz VOUT = 5V, IOUT = 100mA 3
Efficiency EFFI 89 % When connected to extra components, VIN=9V, VOUT = 5V, IOUT=1A 3

CAD (KiCad official)

  • Symbol: HX1039A-AGC
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx1039a-agc-etched.step / hx1039a-agc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx1039a-agc.step / hx1039a-agc.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
hx1039a-agc.step 122 KB You want the bare part, or you mark your own boards.
hx1039a-agc-etched.step 2.1 MB You want the part with HX1039A-AGC already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 529 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HEXIN datasheet (9 pp, sha256 ebb06962f516d040, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF