component
LT6106IS5#TRMPBF
Public Made by Adomby adom
Analog Devices Operational Amplifier, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6106IS5#TRMPBF
Analog Devices · Operational Amplifier · TSOT-23-5
LT6106IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Current output that sources a current proportional to the sense voltage into an external resistor, with maximum output current of 1mA. |
| 2 | V- | power_in | Normally connected to ground. |
| 3 | -IN | input | The internal sense amplifier drives -IN to the same potential as +IN, and a resistor RIN from V+ to -IN sets IOUT = VSENSE/RIN, with the maximum RIN value being 500Ω. |
| 4 | +IN | input | Must be tied to the system load end of the sense resistor, either directly or through a resistor. |
| 5 | V+ | power_in | Positive supply pin connected directly to either side of the sense resistor, with a supply range of 2.7V to 36V and 44V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | V+ | 2.7 | 36 | V | full specified temperature range | 2 | |
| Input Offset Voltage | VOS | 150 | 250 | µV | VSENSE = 5mV, 25°C | 2 | |
| Input Offset Voltage (full temp) | VOS | 350 | µV | VSENSE = 5mV, over full specified temperature range | 2 | ||
| Input Offset Voltage Drift | ΔVOS/ΔT | 1 | µV/°C | VSENSE = 5mV | 2 | ||
| Input Bias Current (+IN) | IB | 40 | nA | V+ = 12V, 36V, 25°C | 2 | ||
| Input Bias Current (+IN) full temp | IB | 65 | nA | V+ = 12V, 36V, full specified temperature range | 2 | ||
| Input Offset Current | IOS | 1 | nA | V+ = 12V, 36V | 2 | ||
| Maximum Output Current | IOUT | 1 | mA | Note 2 | 2 | ||
| Power Supply Rejection Ratio | PSRR | 106 | dB | V+ = 2.7V to 36V, VSENSE = 5mV | 2 | ||
| Input Sense Voltage Full Scale | VSENSE(MAX) | 0.5 | V | RIN = 500Ω (Notes 2, 7) | 2 | ||
| Gain Error | AV Error | -0.65 | -0.25 | 0 | % | VSENSE = 500mV, RIN = 500Ω, ROUT = 10k, V+ = 12.5V | 2 |
| Gain Error | AV Error | -0.45 | -0.14 | 0.1 | % | VSENSE = 500mV, RIN = 500Ω, ROUT = 10k, V+ = 36V | 2 |
| Output Swing High (Referred to V+) | VOUT(HIGH) | 1.2 | 1.4 | V | VSENSE = 120mV | 3 | |
| Minimum Output Voltage | 12 | 45 | mV | VSENSE = 0mV, RIN = 100Ω, ROUT = 10k | 3 | ||
| Minimum Output Voltage (full temp) | 65 | mV | VSENSE = 0mV, RIN = 100Ω, ROUT = 10k, full specified temperature range | 3 | |||
| Minimum Output Voltage | 7 | 16 | mV | VSENSE = 0mV, RIN = 500Ω, ROUT = 10k, V+ = 12V, 36V | 3 | ||
| Minimum Output Voltage (full temp) | 22 | mV | VSENSE = 0mV, RIN = 500Ω, ROUT = 10k, V+ = 12V, 36V, full specified temperature range | 3 | |||
| Supply Current | IS | 60 | 85 | µA | V+ = 2.7V, IOUT = 0µA, (VSENSE = -5mV) | 3 | |
| Supply Current (full temp) | IS | 115 | µA | V+ = 2.7V, IOUT = 0µA, full specified temperature range | 3 | ||
| Supply Current | IS | 65 | 95 | µA | V+ = 12V, IOUT = 0µA, (VSENSE = -5mV) | 3 | |
| Supply Current (full temp) | IS | 120 | µA | V+ = 12V, IOUT = 0µA, full specified temperature range | 3 | ||
| Supply Current | IS | 70 | 100 | µA | V+ = 36V, IOUT = 0µA, (VSENSE = -5mV) | 3 | |
| Supply Current (full temp) | IS | 130 | µA | V+ = 36V, IOUT = 0µA, full specified temperature range | 3 | ||
| Input Current | -10 | mA | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | LT6106C/LT6106I | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | LT6106I | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 2 | ||||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 250 | °C/W | S5 package, 5-lead TSOT-23 | 2 | ||
| Signal Bandwidth (-3dB) | BW | 200 | kHz | IOUT = 1mA, RIN = 100Ω, ROUT = 5k | 3 | ||
| Input Step Response (to 50% of Output Step) | tr | 3.5 | µs | ΔVSENSE = 100mV Step, RIN = 100Ω, ROUT = 5k, Rising Edge | 3 |
CAD (KiCad official)
- Symbol:
LT6106IS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt6106is5-trmpbf-etched.step/lt6106is5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6106is5-trmpbf.step/lt6106is5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
227822da883faf9f, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).