component
RY8401
Public Made by Adomby adom
RYCHIP DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRY8401
RYCHIP · DC-DC Converters · SOT-23-6
RY8401 from RYCHIP, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | power_out | Bootstrap pin: a capacitor connected between SW and this pin forms the floating supply for the high-side switch driver. |
| 2 | GND | power_in | Ground pin. |
| 3 | FB | input | Adjustable-version feedback input, connected to the center point of the external resistor divider; the internal reference is 0.8V (0.780V to 0.820V). |
| 4 | EN | input | Drive to logic-high to enable the IC and to logic-low to disable it into micro-power shutdown; the rising threshold is 1.3V and the falling threshold is 0.9V. |
| 5 | IN | power_in | Power supply pin; the input voltage range is 4V to 38V, with an absolute maximum VIN of 42V. |
| 6 | SW | output | Switching pin connected to the internal power MOSFETs; the absolute maximum SW voltage is -0.3V to 42V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) absolute maximum | -0.3 | 42 | V | 3 | |||
| EN voltage absolute maximum | -0.3 | 42 | V | 3 | |||
| SW voltage absolute maximum | -0.3 | 42 | V | 3 | |||
| BS voltage absolute maximum | 7 | V | 3 | ||||
| FB voltage absolute maximum | -0.3 | 6 | V | 3 | |||
| Operating junction temperature absolute maximum | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature (soldering) | 260 | °C | Soldering, 10 sec. | 3 | |||
| Operating junction temperature (recommended) | -40 | 125 | °C | 3 | |||
| Operating temperature range | -40 | 85 | °C | 3 | |||
| Input voltage | VIN | 4 | 38 | V | 3 | ||
| Output current | 0 | 0.6 | A | 3 | |||
| Input Voltage Range | 4 | 38 | V | 4 | |||
| Supply Current (Quiescent) | 0.4 | 0.8 | mA | VEN =3.0V | 4 | ||
| Supply Current (Shutdown) | 10 | uA | VEN =0 or EN = GND | 4 | |||
| Feedback Voltage | 0.78 | 0.8 | 0.82 | V | 4 | ||
| High-Side Switch On-Resistance | 500 | mΩ | ISW=100mA | 4 | |||
| Low-Side Switch On-Resistance | 300 | mΩ | ISW=-100mA | 4 | |||
| Upper Switch Current Limit | 1 | A | 4 | ||||
| Over Voltage Protection Threshold | 39 | V | 4 | ||||
| Switching Frequency | 800 | KHz | 4 | ||||
| Maximum Duty Cycle | 92 | % | VFB=90% | 4 | |||
| Minimum On-Time | 60 | nS | 4 | ||||
| EN Rising Threshold | 1.3 | V | 4 | ||||
| EN Falling Threshold | 0.9 | V | 4 | ||||
| Under-Voltage Lockout Threshold, Wake up VIN Voltage | 3.6 | 3.8 | V | 4 | |||
| Under-Voltage Lockout Threshold, Shutdown VIN Voltage | 3.1 | 3.3 | V | 4 | |||
| Under-Voltage Lockout Hysteresis VIN voltage | 300 | mV | 4 | ||||
| Soft Start | 1 | mS | 4 | ||||
| Thermal Shutdown | 150 | ℃ | 4 | ||||
| Thermal Hysteresis | 30 | ℃ | 4 | ||||
| Junction-to-ambient thermal resistance (RθJA) | RθJA | 105 | °C/W | JESD 51-7, 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 55 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 17.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 17.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
RY8401 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ry8401-etched.step/ry8401-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ry8401.step/ry8401.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RYCHIP datasheet (13 pp, sha256
e041ccbaf017727a, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).