component
JW1FSN-DC12V
Public Made by Adomby adom
PANASONIC Power Relays. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownJW1FSN-DC12V
PANASONIC · Power Relays · Unknown
JW1FSN-DC12V from PANASONIC, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Coil | passive | Coil terminal (DC12V nominal coil, 1 Form C). |
| 8 | Coil | passive | Coil terminal (DC12V nominal coil). |
| 6 | COM | passive | Common contact of the 1 Form C contact. |
| 2 | N.C. | passive | Normally closed contact: connected to COM while the coil is de-energised. |
| 4 | N.O. | passive | Normally open contact: connected to COM while the coil is energised. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PANASONIC |
| Package | Unknown |
| Category | Relays |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Insulation resistance (Initial) | 1000 | MΩ | at 500V DC | 3 | |||
| Contact resistance (Initial) | 100 | mΩ | By voltage drop 6 V DC 1A | 3 | |||
| Operate time (at nominal voltage) | 15 | ms | at 20°C; excluding contact bounce time | 3 | |||
| Release time (at nominal voltage) | 5 | ms | at 20°C; excluding contact bounce time; without diode | 3 | |||
| Pick-up voltage | 70 | %V | at 20°C (Initial); of nominal voltage | 2 | |||
| Drop-out voltage | 10 | %V | at 20°C (Initial); of nominal voltage | 2 | |||
| Max. applied voltage | 130 | %V | at 60°C of nominal voltage | 2 | |||
| Max. applied voltage | 120 | %V | at 85°C of nominal voltage | 2 | |||
| Coil resistance tolerance | -10 | 10 | % | at 20°C | 2 | ||
| Nominal operating current tolerance | -10 | 10 | % | at 20°C | 2 | ||
| Max. switching voltage (AC) | 250 | V AC | resistive load | 3 | |||
| Max. switching voltage (DC) | 30 | V DC | resistive load | 3 | |||
| Max. switching current | 10 | A | High capacity type | 3 | |||
| Max. switching power (resistive load) | 2500 | VA | High capacity type, resistive load | 3 | |||
| Max. switching power (resistive load) | 300 | W | High capacity type, resistive load | 3 | |||
| Min. switching capacity (reference value) | 100 | mA | reference value; 5 V DC | 3 | |||
| Expected life, mechanical | 5 | ×10^6 operations | at 180 times/min | 3 | |||
| Electrical life (10A 250V AC) | 1 | ×10^5 operations | 10A 250V AC resistive load; at 6 times/min | 3 | |||
| Electrical life (10A 30V DC) | 1 | ×10^5 operations | 10A 30V DC resistive load; at 6 times/min | 3 | |||
| Clearance (IEC61810-1) | 5.5 | mm | IEC61810-1 | 7 | |||
| Creepage distance (IEC61810-1) | 8 | mm | IEC61810-1 | 7 | |||
| Ambient temperature (Class E) | -40 | 60 | °C | Class E insulation; operation, transport and storage | 3 | ||
| Humidity | 5 | 85 | %R.H. | not freezing or condensing at low temperature | 3 | ||
| Nominal coil voltage | 12 | V DC | 2 | ||||
| Coil resistance | 270 | Ω | at 20°C | 2 | |||
| Nominal operating current | 44 | mA | at 20°C | 2 | |||
| Nominal operating power | 530 | mW | 2 | ||||
| Nominal switching capacity (AC) | 10 | A | 250V AC resistive load | 3 | |||
| Nominal switching capacity (DC) | 10 | A | 30V DC resistive load | 3 | |||
| Rated voltage (insulation) | 250 | V | IEC61810-1 insulation characteristics | 7 |
CAD (Adom-generated)
- Symbol:
JW1FSN-DC12V - Footprint:
Adom_Gen:PANASONIC_JW1_e59325 - 3D model: generated to fit the land (STEP)
- 3D model files:
jw1fsn-dc12v-etched.step/jw1fsn-dc12v-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jw1fsn-dc12v.step/jw1fsn-dc12v.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PANASONIC datasheet (9 pp, sha256
69a38b655d21af82, retrieved 2026-11-06, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.