component
SA8338-MS
Public Made by Adomby adom
MSKSEMI Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSA8338-MS
MSKSEMI · Brushed DC Motor Drivers · SOP-8
SA8338-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Backward (reverse) logic input that, together with FI, selects forward, reverse, brake or stop per the truth table, must stay low or high-impedance until VCC has risen and a 3 ms delay has elapsed, and has VIH ≥ 2.2 V and VIL ≤ 0.7 V, with inputs limited to 30 kHz and tH, tL ≥ 100 ns. |
| 2 | FI | input | Forward logic input that, together with BI, selects forward, reverse, brake or stop per the truth table, must stay low or high-impedance until VCC has risen and a 3 ms delay has elapsed, and has VIH ≥ 2.2 V and VIL ≤ 0.7 V, with inputs limited to 30 kHz and tH, tL ≥ 100 ns. |
| 3 | GND | power_in | Ground reference; all voltage ratings of the device are specified with respect to this terminal. |
| 4 | VCC | power_in | Motor and logic power supply, operating range 3.0 V to 18 V, with an absolute maximum of 20 V, and input decoupling capacitors should be placed as close to this pin as possible. |
| 5 | FO | output | Forward bridge output (paired with pin 6) that is high in forward mode, low in reverse and brake modes, and open in stop mode, with continuous output current limited to 5.0 A. |
| 6 | FO | output | Forward bridge output (paired with pin 5) that is high in forward mode, low in reverse and brake modes, and open in stop mode, with continuous output current limited to 5.0 A. |
| 7 | BO | output | Reverse bridge output (paired with pin 8) that is high in reverse mode, low in forward and brake modes, and open in stop mode, with continuous output current limited to 5.0 A. |
| 8 | BO | output | Reverse bridge output (paired with pin 7) that is high in reverse mode, low in forward and brake modes, and open in stop mode, with continuous output current limited to 5.0 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range (VCC) | VCC | 3 | 18 | V | 4 | ||
| Input signal voltage INH and INL | VINH | -0.3 | 18 | V | 4 | ||
| Output continuous current | VOUT_X | 0 | 5 | A | Based on 40mm2 single-sided PCB, FR4 PCB (1 oz.) | 4 | |
| Logic input frequency | FIN_X | 30 | KHz | 4 | |||
| Operating voltage | Vopr | 3 | 18 | V | 4 | ||
| Standby current | lCCST | 1 | uA | VCC=12V,FI=BI=0V,noload | 4 | ||
| Undervoltage lockout (VCC rising) | UVLO | 1.9 | 2.2 | 2.8 | V | VCC rising | 4 |
| Input high level voltage | VINH | 2.2 | V | 4 | |||
| Input low level voltage | VINL | 0.7 | V | 4 | |||
| Input high-level current | IINH | 110 | 200 | uA | VCC = 12V,VIN = 5V | 4 | |
| Input low-level current | IINL | 1 | uA | VCC = 12V,VIN= 0V | 4 | ||
| Supply voltage (absolute maximum) | VCC | 20 | V | Maximum operating temperature range unless otherwise specified | 3 | ||
| Output continuous current (absolute maximum) | lout | 9 | A | Maximum operating temperature range unless otherwise specified | 3 | ||
| Operating temperature | Top | -25 | 85 | ℃ | Maximum operating temperature range unless otherwise specified | 3 | |
| Storage temperature | Tstg | -55 | 150 | ℃ | Maximum operating temperature range unless otherwise specified | 3 |
CAD (KiCad official)
- Symbol:
SA8338-MS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sa8338-ms-etched.step/sa8338-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sa8338-ms.step/sa8338-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
03c0c90054a513ec, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).