3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS3440XH6-Q1
Jiangsu RUNIC Tech · Voltage References · SOT-23-6
RS3440XH6-Q1 from Jiangsu RUNIC Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND_F | power_in | Ground force connection; all voltages are specified with respect to the GND pin. |
| 2 | GND_S | power_in | Ground sense connection, used with the force and sense contacts for the reference measurement. |
| 3 | EN | input | Enable connection that enables or disables the device, with the enable voltage limited to 0 V to IN (1.5 V minimum for active mode and 0.5 V maximum for shutdown mode). |
| 4 | IN | power_in | Input supply voltage connection, with a recommended input range of VOUT+0.5 V to 12 V and a minimum supply of 4 V for the family. |
| 5 | OUT_S | input | Reference voltage output sense connection, used to sense the output voltage at the load. |
| 6 | OUT_F | output | Reference voltage output force connection, sourcing or sinking load current up to ±10 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | VOERR | -0.05 | 0.05 | % | All voltage options | 7 | |
| Temperature Coefficient | TC | 5 | 10 | ppm/°C | TA = -40°C to +125°C | 7 | |
| Line Regulation | dVOUT/dVIN | 1 | 4 | ppm/V | VIN = (VOUT + 0.5) to 12 V | 7 | |
| Line Regulation over temperature | dVOUT/dVIN | 6 | ppm/V | VIN = (VOUT + 0.5) to 12 V, TA = -40°C to +125°C | 7 | ||
| Load Regulation Sourcing | dVOUT/dILOAD | 1.5 | 4 | ppm/mA | IL = 0 mA to 10 mA, VIN = VOUT + 0.5 V | 7 | |
| Load Regulation Sourcing over temperature | dVOUT/dILOAD | 6 | ppm/mA | IL = 0 mA to 10 mA, VIN = VOUT + 0.5 V, TA = -40°C to +125°C | 7 | ||
| Load Regulation Sinking | dVOUT/dILOAD | 2.5 | 8 | ppm/mA | IL = 0 mA to -10 mA, VIN = VOUT + 0.5 V | 7 | |
| Load Regulation Sinking over temperature | dVOUT/dILOAD | 25 | ppm/mA | IL = 0 mA to -10 mA, VIN = VOUT + 0.5 V, TA = -40°C to +125°C | 7 | ||
| Quiescent Current, active mode | IQ | 150 | 200 | µA | Active mode, ILOAD = 0, TA = 25°C | 7 | |
| Quiescent Current, active mode over temperature | IQ | 230 | µA | Active mode, ILOAD = 0, TA = -40°C to +125°C | 7 | ||
| Quiescent Current, shutdown mode | IQ | 4 | 10 | µA | Shutdown mode, TA = 25°C | 7 | |
| Quiescent Current, shutdown mode over temperature | IQ | 15 | µA | Shutdown mode, TA = -40°C to +125°C | 7 | ||
| ENABLE Pin Voltage, reference active | 1.5 | V | Voltage reference in active mode (EN = 1), TA = -40°C to +125°C | 7 | |||
| ENABLE Pin Voltage, reference shutdown | 0.5 | V | Voltage reference in shutdown mode (EN = 0), TA = -40°C to +125°C | 7 | |||
| ENABLE Pin Leakage Current | IEN | 1.5 | 3 | µA | VEN = VIN = 12V, TA = 25°C | 8 | |
| ENABLE Pin Leakage Current over temperature | IEN | 4 | µA | VEN = VIN = 12V, TA = -40°C to +125°C | 8 | ||
| Capacitive Load | CL | 1 | 10 | µF | 7 | ||
| Voltage VIN | VIN | 12 | V | ILOAD = 0, TA = -40°C to +125°C; minimum printed as VOUT+0.5 (1) | 7 | ||
| Input voltage IN (absolute maximum) | IN | -0.3 | 13 | V | 6 | ||
| Enable voltage EN (absolute maximum) | EN | -0.3 | V | Printed as IN+0.3 V; numeric maximum not given | 6 | ||
| Output voltage VOUT (absolute maximum) | VOUT | -0.3 | 5.5 | V | 6 | ||
| Output short circuit current (absolute maximum) | ISC | 30 | mA | 6 | |||
| Package thermal impedance SOT-23-6 | θJA | 230 | °C/W | Per JESD-51 | 6 | ||
| Operating temperature (absolute maximum) | TA | -40 | 125 | °C | 6 | ||
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Input voltage IN (recommended) | IN | 12 | V | Minimum printed as VOUT+0.5 (1); minimum supply 4 V per note (1) | 6 | ||
| Enable voltage (recommended) | EN | 0 | V | Maximum printed as IN; numeric maximum not given | 6 | ||
| Load current (recommended) | ILoad | -10 | 10 | mA | 6 | ||
| Operating temperature (recommended) | TA | -40 | 125 | °C | 6 | ||
| Output Voltage | VOUT | 4.096 | V | RS3440-Q1 variant | 7 | ||
| Output Voltage Noise | en | 8 | µVPP/V | f = 0.1Hz to 10Hz | 7 | ||
| Short-Circuit Current, sourcing | ISC | 23 | mA | Sourcing | 7 | ||
| Short-Circuit Current, sinking | ISC | 25 | mA | Sinking | 7 | ||
| Long-Term Stability | 47 | ppm | 0 to 1000h @25°C | 7 | |||
| Long-Term Stability | 44 | ppm | 1000h to 2000h @25°C | 7 | |||
| Long-Term Stability | 66 | ppm | 0 to 2000h @25°C | 7 | |||
| Thermal Hysteresis | 75 | ppm | 25°C, -40°C, 125°C, 25°C Cycle1 | 7 | |||
| Turn on Settling Time | tON | 2 | ms | To 0.1% with CL = 10μF | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
RS3440XH6-Q1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
rs3440xh6-q1-etched.step/rs3440xh6-q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs3440xh6-q1.step/rs3440xh6-q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256
81de75552105267c, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).