3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHLP5907MFX-3.0
HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP5907MFX-3.0 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input pin; the datasheet gives a maximum input voltage of 6 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Enable pin that switches the output on and off; with CE at 0 V the shutdown current is 1 µA (the overview cites 0.1 µA typical). |
| 4 | NC | unconnected | No connection; the pin is left floating. |
| 5 | VOUT | power_out | Regulated output pin; the datasheet specifies output voltages from 1.2 V to 3.6 V and a maximum output current of 300 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (electrical table) | VIN | 6 | V | 3 | |||
| Maximum output current | IOUTmax | 300 | mA | VIN=Vout+1V | 3 | ||
| Load regulation | ∆VOUT | 50 | mV | VIN=Vout+1V, 1mA≤IOUT≤100mA | 3 | ||
| Dropout voltage at 100 mA | Vdif1 | 90 | mV | IOUT =100mA | 3 | ||
| Dropout voltage at 200 mA | Vdif2 | 230 | mV | IOUT =200mA | 3 | ||
| Shutdown current | ICEL | 1 | μA | Vce=0V | 3 | ||
| Line regulation | ∆VOUT/∆VIN • VOUT | 0.05 | %/V | IOUT =40mA, Vout+1V ≤ VIN ≤ 8V | 3 | ||
| Output noise voltage | en | 50 | uVrms | IOUT =40mA, 300Hz~50kHz | 3 | ||
| Power supply rejection ratio | PSRR | 70 | dB | Vin= [Vout+1]V +1Vp-pAC, IOUT =40mA, f=1kHz | 3 | ||
| Input voltage (absolute maximum) | Vin | 6 | V | 2 | |||
| Output voltage (absolute maximum range) | Vout | -0.3 | 0.3 | V | Vss-0.3 V to Vin+0.3 V: min -0.3 relative to Vss, max +0.3 relative to Vin | 2 | |
| Output current (absolute maximum) | Iout | 450 | mA | 2 | |||
| Maximum allowable power dissipation | PD | 300 | mW | 2 | |||
| Operating temperature | TOPR | -20 | 85 | ℃ | 2 | ||
| Storage temperature | Tstg | -40 | 125 | ℃ | 2 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10s | 2 | ||
| Quiescent current | ISS | 70 | μA | VIN=Vout+1V | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
HLP5907MFX-3.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
hlp5907mfx-3-0-etched.step/hlp5907mfx-3-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlp5907mfx-3-0.step/hlp5907mfx-3-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (5 pp, sha256
668355de3206a342, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).