Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL3232-TS

XINLUDA · RS232 ICs · TSSOP-16

XL3232-TS from XINLUDA, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor (0.1 µF at 3.3 V; 0.047 µF at 5 V per the test conditions).
2 V+ power_out Positive charge-pump output for the storage capacitor only; the absolute maximum V+ is 7 V with respect to GND.
3 C1- passive Negative lead of the C1 charge-pump capacitor.
4 C2+ passive Positive lead of the C2 charge-pump capacitor (0.33 µF at 5 V per the test conditions).
5 C2- passive Negative lead of the C2 charge-pump capacitor.
6 V- power_out Negative charge-pump output for the storage capacitor only; the absolute maximum V- is -7 V with respect to GND.
7 DOUT2 output RS-232 line driver output to the remote RS-232 system, with outputs protected against shorts to ground and driver output limited to ±13.2 V.
8 RIN2 input RS-232 line receiver input from the remote system, rated for receiver input voltages of ±25 V.
9 ROUT2 output Logic-level receiver output to the UART; an open RIN input causes ROUT to go high.
10 DIN2 input Logic-level driver input from the UART that must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC).
11 DIN1 input Logic-level driver input from the UART that must be held at a valid low or high level (VIL max 0.8 V; VIH min 2 V at 3.3 V VCC or 2.4 V at 5 V VCC).
12 ROUT1 output Logic-level receiver output to the UART; an open RIN input causes ROUT to go high.
13 RIN1 input RS-232 line receiver input from the remote system, rated for receiver input voltages of ±25 V.
14 DOUT1 output RS-232 line driver output to the remote RS-232 system, with outputs protected against shorts to ground and driver output limited to ±13.2 V.
15 GND power_in Ground reference; all voltages in the datasheet are referenced to network GND.
16 VCC power_in Supply voltage input, 3 V to 5.5 V (3.3 V or 5 V recommended).

Key specifications

Parameter Value
Manufacturer XINLUDA
Package TSSOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply voltage, VCC = 3.3 V VCC 3 3.3 3.6 V VCC = 3.3 V 5
VCC Supply voltage, VCC = 5 V VCC 4.5 5 5.5 V VCC = 5 V 5
Driver high-level input voltage DIN VIH 2 V VCC = 3.3 V 5
Driver high-level input voltage DIN VIH 2.4 V VCC = 5 V 5
Driver low-level input voltage DIN VIL 0.8 V 5
Driver input voltage DIN VI 0 5.5 V 5
Receiver input voltage RIN VI -25 25 V 5
Operating free-air temperature, XL3232-TS TA -40 85 °C XL3232-TS 5
VCC Supply voltage VCC -0.3 6 V 4
V+ Positive output supply voltage V+ -0.3 7 V 4
V- Negative output supply voltage V- -7 0.3 V 4
V+, V- Supply voltage difference V+, V- 13 V 4
Input voltage, drivers VI -0.3 6 V Drivers 4
Input voltage, receivers VI -25 25 V Receivers 4
Output voltage, drivers VO -13.2 13.2 V Drivers 4
Output voltage, receivers VO -0.3 V Receivers; upper limit printed as VCC + 0.3 V 4
Operating virtual junction temperature TJ 125 °C 4
Storage temperature Tstg -45 150 °C 4
Supply current ICC 0.5 10 mA No load, VCC = 3.3 V or 5 V 5
DOUT high-level output voltage VOH 5 5.4 V RL = 3 kΩ to GND, DIN = GND 5
DOUT low-level output voltage VOL -5.4 -5 V RL = 3 kΩ to GND, DIN = VCC 5
High-level input current IIH -1 0.01 1 µA VI = VCC 5
Low-level input current IIL -1 0.01 1 µA VI at GND 5
Short-circuit output current IOS -35 35 mA VCC = 3.6 V, VO = 0 V 5
Short-circuit output current IOS -60 60 mA VCC = 5.5 V, VO = 0 V 5
Output resistance rO 300 Ω VCC, V+, and V- = 0 V, VO = ±2 V 5
Low-level output voltage VOL 0.4 V IOL = 1.6 mA 6
Positive-going input threshold voltage VIT+ 1.5 2.4 V VCC = 3.3 V 6
Positive-going input threshold voltage VIT+ 1.8 2.4 V VCC = 5 V 6
Negative-going input threshold voltage VIT- 0.6 1.2 V VCC = 3.3 V 6
Negative-going input threshold voltage VIT- 0.8 1.5 V VCC = 5 V 6
Input hysteresis (VIT+, VIT-) Vhys 0.3 V 6
Input resistance ri 3 5 7 kΩ VI = ±3 V to ±25 V 6
Maximum data rate 150 250 kbit/s RL = 3 kΩ, one DOUT switching, CL = 1000 pF 6
Driver pulse skew tsk(p) 300 ns RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF 6
Driver slew rate, transition region SR(tr) 6 30 V/µs RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF 6
Driver slew rate, transition region SR(tr) 4 30 V/µs RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 2500 pF 6
Receiver propagation delay time, low- to high-level output tPLH 300 ns CL = 150 pF 6
Receiver propagation delay time, high- to low-level output tPHL 300 ns CL = 150 pF 6
Receiver pulse skew tsk(p) 300 ns 6
Junction-to-ambient thermal resistance, TS (TSSOP) 16 pins RθJA 103.1 °C/W TS (TSSOP), 16 pins 4
Junction-to-case (top) thermal resistance, TS (TSSOP) 16 pins RθJCtop 49.2 °C/W TS (TSSOP), 16 pins 4
Junction-to-board thermal resistance, TS (TSSOP) 16 pins RθJB 54.8 °C/W TS (TSSOP), 16 pins 4
Junction-to-top characterization parameter, TS (TSSOP) 16 pins ψJT 12 °C/W TS (TSSOP), 16 pins 4
Junction-to-board characterization parameter, TS (TSSOP) 16 pins ψJB 54.1 °C/W TS (TSSOP), 16 pins 4

CAD (KiCad official)

  • Symbol: XL3232-TS
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: xl3232-ts-etched.step / xl3232-ts-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl3232-ts.step / xl3232-ts.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (15 pp, sha256 746b01f367b01497, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF