3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPS3779CQDBVRQ1
Texas Instruments · Monitors & Reset Circuits · SOT-23-6
TPS3779CQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage input: connect a 1.5-V to 5.5-V supply to VDD to power the device, with a 0.1-µF ceramic capacitor placed close to this pin (required for VDD < 1.5 V). |
| 2 | OUT1 | output | Output for SENSE1 that is driven low when SENSE1 falls below VIT- and deasserted high after SENSE1 rises above VIT+; it is a push-pull output on the TPS3779-Q1 and can be pulled up to 5.5 V on the open-drain TPS3780-Q1. |
| 3 | OUT2 | output | Output for SENSE2 that is driven low when SENSE2 falls below VIT- and deasserted high after SENSE2 rises above VIT+; it is a push-pull output on the TPS3779-Q1 and can be pulled up to 5.5 V on the open-drain TPS3780-Q1. |
| 4 | SENSE2 | input | Voltage-monitoring input connected to the monitored rail through an external resistor divider, with the input range of 0 V to 5.5 V and OUT2 asserted when it drops below VIT-. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | SENSE1 | input | Voltage-monitoring input connected to the monitored rail through an external resistor divider, with the input range of 0 V to 5.5 V and OUT1 asserted when it drops below VIT-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power-supply voltage (VDD) input supply range | VDD | 1.5 | 5.5 | V | 5 | ||
| Power-on-reset voltage | V(POR) | 0.8 | V | VOL (max) = 0.2 V, IOL = 15 µA | 5 | ||
| Supply current (into VDD pin) | IDD | 2.09 | 5.8 | µA | VDD = 3.3 V, no load | 5 | |
| Supply current (into VDD pin) | IDD | 2.29 | 6.5 | µA | VDD = 5.5 V, no load | 5 | |
| Positive-going input threshold voltage | VIT+ | 1.194 | V | V(SENSEx) rising | 5 | ||
| Positive-going input threshold accuracy | VIT+ | -1 | 1 | % | V(SENSEx) rising | 5 | |
| Negative-going input threshold voltage | VIT- | 1.074 | V | TPS37xxC-Q1 (10% hysteresis), V(SENSEx) falling | 5 | ||
| Negative-going input threshold accuracy | VIT- | -1 | 1 | % | V(SENSEx) falling | 5 | |
| Input current | I(SENSEx) | -15 | 15 | nA | V(SENSEx) = 0 V or VDD | 5 | |
| Low-level output voltage | VOL | 0.25 | V | VDD ≥ 1.5 V, ISINK = 0.4 mA | 5 | ||
| Low-level output voltage | VOL | 0.3 | V | VDD ≥ 4.5 V, ISINK = 3.2 mA | 5 | ||
| High-level output voltage (TPS3779-Q1 only) | VOH | 0.8 | VDD | VDD ≥ 1.5 V, ISOURCE = 0.4 mA | 5 | ||
| SENSEx (rising) to OUTx propagation delay | tPD(r) | 5.5 | µs | SENSEx transitions between 0 V and 1.3 V; typical values at TJ = 25°C and VDD = 3.3 V | 6 | ||
| SENSEx (falling) to OUTx propagation delay | tPD(f) | 10 | µs | SENSEx transitions between 0 V and 1.3 V; typical values at TJ = 25°C and VDD = 3.3 V | 6 | ||
| Startup delay | tSD | 570 | µs | 6 | |||
| Supply voltage VDD (absolute maximum) | VDD | -0.3 | 7 | V | 4 | ||
| Output voltage OUT1, OUT2 (TPS3779-Q1 only, absolute maximum) | OUT1, OUT2 | -0.3 | V | upper limit printed as VDD + 0.3 V | 4 | ||
| Output voltage OUT1, OUT2 (TPS3780-Q1 only, absolute maximum) | OUT1, OUT2 | -0.3 | 7 | V | TPS3780-Q1 only; not applicable to TPS3779 | 4 | |
| SENSE1, SENSE2 voltage (absolute maximum) | SENSE1, SENSE2 | -0.3 | 7 | V | 4 | ||
| Current OUT1, OUT2 (absolute maximum) | OUT1, OUT2 | -20 | 20 | mA | 4 | ||
| Operating junction temperature (absolute maximum) | TJ | -40 | 125 | °C | operating junction temperature range | 4 | |
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Human-body model ESD (HBM) | V(ESD) | -2000 | 2000 | V | per AEC Q100-002 | 4 | |
| Charged-device model ESD (CDM) | V(ESD) | -500 | 500 | V | per AEC Q100-011 | 4 | |
| Power-supply voltage | VDD | 1.5 | 5.5 | V | 4 | ||
| Sense voltage SENSE1, SENSE2 | VSENSE | 0 | 5.5 | V | 4 | ||
| Output voltage OUT1, OUT2 (TPS3779-Q1 only) | VOUT | 0 | V | upper limit printed as VDD + 0.3 V | 4 | ||
| Current OUT1, OUT2 | IOUT | -5 | 5 | mA | 4 | ||
| Junction temperature | TJ | -40 | 25 | 125 | °C | 4 | |
| Junction-to-ambient thermal resistance (DBV, SOT-23) | RθJA | 193.9 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DBV, SOT-23) | RθJC(top) | 134.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DBV, SOT-23) | RθJB | 39 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DBV, SOT-23) | ψJT | 30.4 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DBV, SOT-23) | ψJB | 38.5 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS3779CQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps3779cqdbvrq1-etched.step/tps3779cqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3779cqdbvrq1.step/tps3779cqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
b2a6873290f284fb, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).