Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADUM6000ARWZ

Analog Devices · DC-DC Converters · SOIC-16-300mil

ADUM6000ARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage, 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source.
2 GND1 power_in Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and should both be connected to a common ground.
3 NC unconnected No internal connection.
4 RCIN input Regulation control input that must be tied low or driven by a master RCOUT (slave mode, RCSEL low) to disable or regulate the converter; it is weakly pulled low and must not be tied high when RCSEL is low.
5 RCOUT output Regulation control output in master configuration (RCSEL high), connected to the RCIN pin of a slave isoPower device.
6 RCSEL input Selects standalone/master mode (RCSEL high) or slave mode (RCSEL low); weakly pulled high and should be tied high or low in noisy environments.
7 VDD1 power_in Primary supply voltage, 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same common power source.
8 GND1 power_in Ground reference for the primary side of the converter; internally connected to pin 2 and should be connected to a common ground.
9 GNDISO power_in Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and should share a common ground.
10 VISO power_out Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); pins 10 and 16 are internally connected and should both be externally connected.
11 NC unconnected No internal connection.
12 NC unconnected No internal connection.
13 VSEL input Output voltage selection: VSEL = VISO sets VISO to 5.0 V and VSEL = GNDISO sets VISO to 3.3 V; weakly pulled high and has no function in slave mode.
14 NC unconnected No internal connection.
15 GNDISO power_in Ground reference for the secondary side of the converter; internally connected to pin 9 and should share a common ground.
16 VISO power_out Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); internally connected to pin 10 and should be externally connected to it.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature (recommended) TA -40 105 °C Operation at 105°C requires reduction of the maximum load current, as specified in Table 10 7
Primary supply VDD1 @ VSEL = 0 V (recommended) VDD1 3 5.5 V Each voltage relative to its respective ground 7
Primary supply VDD1 @ VSEL = VISO (recommended) VDD1 4.5 5.5 V Each voltage relative to its respective ground 7
Storage Temperature TST -55 150 °C 8
Ambient Operating Temperature TA -40 105 °C 8
Supply Voltages VDD1, VISO -0.5 7 V Each voltage relative to its respective ground 8
Input Voltage (RCIN, RCSEL) RCIN, RCSEL -0.5 V Upper limit printed as VDDI + 0.5 V 8
Output Voltage (RCOUT) RCOUT -0.5 V Upper limit printed as VDDO + 0.5 V 8
Average Total Output Current IISO 80 mA 8
Common-Mode Transients -100 100 kV/µs Across the isolation barrier 8
Setpoint, 5 V primary / 5 V secondary VISO 4.7 5 5.4 V IISO = 0 mA 3
Load Regulation, 5 V primary / 5 V secondary VISO(LOAD) 1 5 % IISO = 8 mA to 72 mA 3
Setpoint, 3.3 V primary / 3.3 V secondary VISO 3 3.3 3.6 V IISO = 0 mA 3
Load Regulation, 3.3 V primary / 3.3 V secondary VISO(LOAD) 1 5 % IISO = 4 mA to 36 mA 3
Setpoint, 5 V primary / 3.3 V secondary VISO 3 3.3 3.6 V IISO = 0 mA 4
Load Regulation, 5 V primary / 3.3 V secondary VISO(LOAD) 1 5 % IISO = 10 mA to 90 mA 4
IDD1 Supply Current, No VISO Load, 5 V/5 V IDD1(Q) 7 16 mA IISO = 0 mA 3
IDD1 Supply Current, No VISO Load, 3.3 V/3.3 V IDD1(Q) 5 13 mA IISO = 0 mA 3
IDD1 Supply Current, No VISO Load, 5 V/3.3 V IDD1(Q) 4 12 mA IISO = 0 mA 4
IDD1 Supply Current, Full VISO Load, 5 V/5 V IDD1(MAX) 290 mA 3
IDD1 Supply Current, Full VISO Load, 3.3 V/3.3 V IDD1(MAX) 175 mA 3
IDD1 Supply Current, Full VISO Load, 5 V/3.3 V IDD1(MAX) 250 mA 4
Maximum Output Supply Current, 5 V/5 V IISO(MAX) 80 mA VISO > 4.5 V 3
Maximum Output Supply Current, 3.3 V/3.3 V IISO(MAX) 40 mA VISO > 3.0 V 3
Maximum Output Supply Current, 5 V/3.3 V IISO(MAX) 100 mA VISO > 3.0 V 4
Output Ripple, 5 V/5 V VISO(RIP) 75 mV p-p 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 72 mA 3
Output Ripple, 3.3 V/3.3 V VISO(RIP) 50 mV p-p 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 36 mA 3
Output Ripple, 5 V/3.3 V VISO(RIP) 50 mV p-p 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 90 mA 4
Output Noise, 5 V/5 V VISO(N) 200 mV p-p CBO = 0.1 μF//10 μF, IISO = 72 mA 3
Output Noise, 3.3 V/3.3 V VISO(N) 130 mV p-p CBO = 0.1 μF//10 μF, IISO = 36 mA 3
Output Noise, 5 V/3.3 V VISO(N) 130 mV p-p CBO = 0.1 μF//10 μF, IISO = 90 mA 4
Line Regulation, 5 V/5 V VISO(LINE) 1 mV/V IISO = 40 mA, VDD1 = 4.5 V to 5.5 V 3
Line Regulation, 3.3 V/3.3 V VISO(LINE) 1 mV/V IISO = 20 mA, VDD1 = 3.0 V to 3.6 V 3
Line Regulation, 5 V/3.3 V VISO(LINE) 1 mV/V IISO = 50 mA, VDD1 = 4.5 V to 5.5 V 4
Efficiency at Maximum Output Supply Current, 5 V/5 V 31 % IISO = 80 mA 3
Efficiency at Maximum Output Supply Current, 3.3 V/3.3 V 31 % IISO = 40 mA 3
Efficiency at Maximum Output Supply Current, 5 V/3.3 V 26 % IISO = 100 mA 4
Switching Frequency (all configurations) fOSC 180 MHz 3
PWM Frequency (all configurations) fPWM 625 kHz 3
UVLO Positive-Going Threshold (all configurations) VUV+ 2.7 V 3
UVLO Negative-Going Threshold (all configurations) VUV− 2.4 V 3
UVLO Hysteresis (all configurations) VUVH 0.3 V 3
Capacitance (Input-to-Output) CI-O 2.2 pF f = 1 MHz 4
Input Capacitance CI 4 pF From any input data pin to ground 4
IC Junction-to-Ambient Thermal Resistance θJA 45 °C/W Thermocouple at center of package underside; 4-layer board with thin traces 4
Thermal Shutdown Threshold TSSD 150 °C TJ rising 4
Thermal Shutdown Hysteresis TSSD-HYS 20 °C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM6000 is proof-tested by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial discharge detection limit = 5 pC). The 5

CAD (KiCad official)

  • Symbol: ADUM6000ARWZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum6000arwz-etched.step / adum6000arwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum6000arwz.step / adum6000arwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 63adb9d0217815d6, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF