3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTHS4541QWRGTRQ1
Texas Instruments · Differential Amplifiers · VQFN-16-EP(3x3)
THS4541QWRGTRQ1 from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB- | output | Inverted (negative) output feedback pin; the external feedback resistor from FB- connects to the IN+ pin. |
| 2 | IN+ | input | Noninverting (positive) amplifier input; the input resistors drive this pin, and the input pins operate down to the negative rail with about 1.2 V headroom required to Vs+. |
| 3 | IN- | input | Inverting (negative) amplifier input; the input resistors drive this pin, and the input pins operate down to the negative rail with about 1.2 V headroom required to Vs+. |
| 4 | FB+ | output | Noninverting (positive) output feedback pin; the external feedback resistor from FB+ connects to the IN- pin. |
| 5 | Vs+ | power_in | Positive power-supply input; single-supply range is 2.7 V to 5.4 V. |
| 6 | Vs+ | power_in | Positive power-supply input; single-supply range is 2.7 V to 5.4 V. |
| 7 | Vs+ | power_in | Positive power-supply input; single-supply range is 2.7 V to 5.4 V. |
| 8 | Vs+ | power_in | Positive power-supply input; single-supply range is 2.7 V to 5.4 V. |
| 9 | Vocm | input | Common-mode voltage input that sets the output average voltage; if left open it defaults to midsupply, and the usable range is about 0.91 V above Vs- to 1.1 V below Vs+. |
| 10 | OUT+ | output | Noninverted (positive) amplifier output, a rail-to-rail output with about 0.2 V headroom to either supply. |
| 11 | OUT- | output | Inverted (negative) amplifier output, a rail-to-rail output with about 0.2 V headroom to either supply. |
| 12 | PD | input | Power-down control: logic high (above (Vs-) + 1.7 V) gives normal operation and a level within 0.7 V of Vs- powers the device off; the pin cannot be floated because it has no internal pull resistor. |
| 13 | Vs- | power_in | Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V. |
| 14 | Vs- | power_in | Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V. |
| 15 | Vs- | power_in | Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V. |
| 16 | Vs- | power_in | Negative power-supply input, ground for single-supply operation; total supply (Vs+) - (Vs-) is 2.7 V to 5.4 V. |
| 17 | Exposed thermal pad | passive | Exposed thermal pad, electrically isolated from the die, that must be soldered to a power or ground plane and not left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, (Vs+), Vs- | 5.5 | V | 4 | ||||
| Differential input voltage | -1 | 1 | V | 4 | |||
| Continuous input current | -20 | 20 | mA | 4 | |||
| Continuous output current | -80 | 80 | mA | 4 | |||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Operating free-air temperature | -40 | 125 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Single-supply voltage | Vs+ | 2.7 | 5 | 5.4 | V | 4 | |
| Ambient temperature | TA | -40 | 25 | 125 | °C | 4 | |
| Open-loop voltage gain | AOL | 100 | 119 | dB | 6 | ||
| Input-referred offset voltage | -450 | 450 | µV | TA = 25°C | 6 | ||
| Input-referred offset voltage | -600 | 600 | µV | TA = 0°C to 70°C | 6 | ||
| Input-referred offset voltage | -700 | 700 | µV | TA = -40°C to +85°C | 6 | ||
| Input-referred offset voltage | -850 | 850 | µV | TA = -40°C to +125°C | 6 | ||
| Input offset voltage drift | -2.4 | 2.4 | µV/°C | TA = -40°C to +125°C | 6 | ||
| Input bias current (positive out of node) | 10 | 13 | µA | TA = 25°C | 6 | ||
| Input bias current (positive out of node) | 11 | 13.5 | µA | TA = 0°C to 70°C | 6 | ||
| Input bias current (positive out of node) | 12 | 14 | µA | TA = -40°C to +85°C | 6 | ||
| Input bias current (positive out of node) | 12 | 14.5 | µA | TA = -40°C to +125°C | 6 | ||
| Input bias current drift | 6 | 15 | nA/°C | TA = -40°C to +125°C | 6 | ||
| Input offset current | -500 | 500 | nA | TA = 25°C | 6 | ||
| Input offset current | -550 | 550 | nA | TA = 0°C to 70°C | 6 | ||
| Input offset current | -580 | 580 | nA | TA = -40°C to +85°C | 6 | ||
| Input offset current | -620 | 620 | nA | TA = -40°C to +125°C | 6 | ||
| Input offset current drift | -1.3 | 1.3 | nA/°C | TA = -40°C to +125°C | 6 | ||
| Common-mode rejection ratio | 85 | 100 | dB | Input pins at ((Vs+), Vs-) / 2 | 6 | ||
| Output current drive | -75 | 75 | mA | TA = 25°C | 6 | ||
| Quiescent operating current | 9.7 | 10.1 | 10.5 | mA | TA = 25°C, Vs+ = 5 V | 7 | |
| Quiescent operating current | 9.4 | 10.1 | 11 | mA | TA = -40°C to +125°C | 7 | |
| Power-supply rejection ratio | ±PSRR | 85 | 100 | dB | Either supply pin to differential Vout | 7 | |
| Disable pin bias current | 20 | 50 | nA | PD = Vs- → Vs+ | 7 | ||
| Power-down quiescent current | 6 | 30 | µA | PD = (Vs-) + 0.7 V | 7 | ||
| Power-down quiescent current | 2 | 8 | µA | PD = Vs- | 7 | ||
| Gain (Vocm input to differential output average) | 0.975 | 0.982 | 0.995 | V/V | 7 | ||
| Input bias current (Vocm pin) | -0.7 | 0.1 | 0.7 | µA | Considered positive out of node | 7 | |
| Default voltage offset from ((Vs+), Vs-) / 2 | -40 | 40 | mV | Vocm pin open | 7 | ||
| Common-mode offset voltage | CM Vos | -5 | 5 | mV | Vocm input driven to ((Vs+), Vs-) / 2; TA = 25°C | 7 | |
| Common-mode offset voltage | CM Vos | -6 | 5.8 | mV | Vocm input driven to ((Vs+), Vs-) / 2; TA = 0°C to 70°C | 7 | |
| Common-mode offset voltage | CM Vos | -6.2 | 6.2 | mV | Vocm input driven to ((Vs+), Vs-) / 2; TA = -40°C to +85°C | 7 | |
| Common-mode offset voltage | CM Vos | -7 | 7.08 | mV | Vocm input driven to ((Vs+), Vs-) / 2; TA = -40°C to +125°C | 7 | |
| Common-mode offset voltage drift | -20 | 20 | µV/°C | Vocm input driven to ((Vs+), Vs-) / 2 | 7 | ||
| Common-mode loop supply headroom to negative supply | 0.88 | V | < ±12-mV shift from midsupply CM Vos; TA = 25°C | 7 | |||
| Common-mode loop supply headroom to negative supply | 0.91 | V | < ±12-mV shift from midsupply CM Vos; TA = 0°C to 70°C | 7 | |||
| Common-mode loop supply headroom to negative supply | 0.94 | V | < ±12-mV shift from midsupply CM Vos; TA = -40°C to +85°C | 7 | |||
| Common-mode loop supply headroom to positive supply | 1.1 | V | < ±12-mV shift from midsupply CM Vos; TA = 25°C | 7 | |||
| Common-mode loop supply headroom to positive supply | 1.15 | V | < ±12-mV shift from midsupply CM Vos; TA = 0°C to 70°C | 7 | |||
| Common-mode loop supply headroom to positive supply | 1.2 | V | < ±12-mV shift from midsupply CM Vos; TA = -40°C to +85°C | 7 | |||
| Junction-to-ambient thermal resistance | RθJA | 56.1 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 69 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 30.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 30.4 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 14.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
THS4541QWRGTRQ1 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ths4541qwrgtrq1-etched.step/ths4541qwrgtrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths4541qwrgtrq1.step/ths4541qwrgtrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
901037c4a20c17a8, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).