Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN75LVDS391PWR

Texas Instruments · LVDS ICs · TSSOP-16

SN75LVDS391PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN1,2 input Enable input for channels 1 and 2; when disabled the driver outputs are high-impedance, and the input has an internal pulldown that drives it low when open-circuited.
2 1A input LVTTL logic input for driver channel 1; LVTTL inputs are 5-V tolerant, with VIH minimum 2 V and VIL maximum 0.8 V, and an internal pulldown drives the input low when open-circuited.
3 2A input LVTTL logic input for driver channel 2; LVTTL inputs are 5-V tolerant, with VIH minimum 2 V and VIL maximum 0.8 V, and an internal pulldown drives the input low when open-circuited.
4 VCC power_in Supply voltage; recommended 3 V to 3.6 V (3.3 V nominal) with an absolute maximum of 4 V.
5 GND power_in Ground reference for the device; all voltages except differential bus voltages are referenced to the network ground pin.
6 3A input LVTTL logic input for driver channel 3; LVTTL inputs are 5-V tolerant, with VIH minimum 2 V and VIL maximum 0.8 V, and an internal pulldown drives the input low when open-circuited.
7 4A input LVTTL logic input for driver channel 4; LVTTL inputs are 5-V tolerant, with VIH minimum 2 V and VIL maximum 0.8 V, and an internal pulldown drives the input low when open-circuited.
8 EN3,4 input Enable input for channels 3 and 4; when disabled the driver outputs are high-impedance, and the input has an internal pulldown that drives it low when open-circuited.
9 4Z output Differential (LVDS) inverting output of channel 4; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
10 4Y output Differential (LVDS) non-inverting output of channel 4; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
11 3Z output Differential (LVDS) inverting output of channel 3; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
12 3Y output Differential (LVDS) non-inverting output of channel 3; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
13 2Z output Differential (LVDS) inverting output of channel 2; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
14 2Y output Differential (LVDS) non-inverting output of channel 2; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
15 1Z output Differential (LVDS) inverting output of channel 1; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.
16 1Y output Differential (LVDS) non-inverting output of channel 1; differential output magnitude is at least 247 mV into a 100-Ω load when enabled.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Interface
Pins 16

CAD (KiCad official)

  • Symbol: SN75LVDS391PWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn75lvds391pwr-etched.step / sn75lvds391pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75lvds391pwr.step / sn75lvds391pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 0f1613a3d18c924d, retrieved 2026-10-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF