Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TC4427VOA

Microchip Tech · Gate Drivers · SOIC-8

TC4427VOA from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection; this pin is not used on the 8-pin PDIP/MSOP/SOIC package.
2 IN A input MOSFET driver input A is a high-impedance TTL/CMOS compatible input with 300 mV hysteresis, with a logic-high minimum of 2.4 V and logic-low maximum of 0.8 V, and it withstands negative inputs down to GND - 5 V.
3 GND power_in Device return pin that should have a low-impedance connection to the bias supply source return, since high peak current flows out of this pin when the capacitive load is discharged.
4 IN B input MOSFET driver input B is a high-impedance TTL/CMOS compatible input with 300 mV hysteresis, with a logic-high minimum of 2.4 V and logic-low maximum of 0.8 V, and it withstands negative inputs down to GND - 5 V.
5 OUT B output MOSFET driver output B is a low-impedance CMOS push-pull output with pull-up and pull-down devices of equal strength, giving matched rise and fall times, and it rated for 1.5 A peak output current.
6 VDD power_in Bias supply input for the MOSFET driver, rated for 4.5 V to 18 V with respect to GND, and it should be bypassed with local ceramic capacitors (1.0 µF suggested).
7 OUT A output MOSFET driver output A is a low-impedance CMOS push-pull output with pull-up and pull-down devices of equal strength, giving matched rise and fall times, and it rated for 1.5 A peak output current.
8 NC unconnected No connection; this pin is not used on the 8-pin PDIP/MSOP/SOIC package.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage operating range VDD 4.5 18 V 3
Supply voltage (absolute maximum) 22 V 3
Specified Temperature Range (V) TA -40 125 °C V temperature range (TC4427VOA) 4
Storage Temperature Range TA -65 150 °C 4
Maximum Junction Temperature TJ 150 °C 4
Logic '1' High Input Voltage VIH 2 V Note 2: for V temperature range devices, VIH (min) limit is 2.0V 4
Logic '0' Low Input Voltage VIL 0.8 V 4
Input Current IIN -10 10 µA 0V ≤ VIN ≤ VDD 4
Low Output Voltage VOL 0.025 V DC Test 4
Latch-Up Protection Withstand Reverse Current IREV 0.5 A Duty cycle 2%, t 300 µs, VDD = 18V 4
Output Resistance RO 9 12 Ω IOUT = 10 mA, VDD = 18V 4
Rise Time tR 40 ns Figure 4-1 4
Fall Time tF 40 ns Figure 4-1 4
Delay Time tD1 tD1 40 ns Figure 4-1 4
Delay Time tD2 tD2 60 ns Figure 4-1 4
Power Supply Current IS 8 mA VIN = 3V (both inputs) 4
Power Supply Current IS 0.6 mA VIN = 0V (both inputs) 4
Thermal Resistance, 8L-SOIC JA 155 °C/W 4
Peak Output Current IPK 1.5 A VDD = 18V 4

CAD (KiCad official)

  • Symbol: TC4427VOA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tc4427voa-etched.step / tc4427voa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc4427voa.step / tc4427voa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 92aa2e8a1bda9e95, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF