Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP1399AADR2G

onsemi · AC-DC Controllers and Regulators · SOIC-16-EP

NCP1399AADR2G from onsemi, in a SOIC-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HV power_in High-voltage startup current source input. Connects to the rectified AC line or bulk capacitor to perform startup current-source and Dynamic Self-Supply functions. Absolute max 600 V.
3 VBULK/PFCFB input Bulk voltage monitoring input. Receives a divided bulk voltage to implement brown-out protection and PFC feedback. Absolute max -0.3 to 5.5 V.
4 SKIP/REM input Skip threshold adjust / off-mode (remote) control input. On the NCP1399AA (Ay) version this pin sets the skip-in threshold via a resistor to ground and activates off-mode/Standby when pulled up by an external auxiliary voltage source. Absolute max -0.3 to 10 V (By) or -0.3 to 5.5 V (Ay).
5 LLC FB input LLC feedback input. Defines the operating frequency based on the load; activates skip mode under light load and (on NCP1399Ay) activates off-mode. Absolute max -0.3 to 5.5 V.
6 LLC CS input LLC current sense input. Reads the divided resonant capacitor voltage to perform on-time modulation, out-of-resonance protection, over-current protection and secondary-side short-circuit protection. Absolute max -5 to 5 V.
7 OTP/OVP input Combined over-temperature and over-voltage protection input on a single pin. Absolute max -0.3 to 5.5 V.
8 PON/OFF output PFC turn-off FB level adjust. Pulls the FB pin below a level at which the PFC front-stage operation is disabled. Absolute max -0.3 to 5.5 V.
9 PFCMODE output PFC and external HV switch control output. Provides supply voltage for the PFC front-stage controller and/or enables the VBULK sensing network HV switch. Absolute max -0.3 to VCC+0.3 V.
10 VCC power_in Controller supply voltage. Accepts up to 20 V; typical turn-on threshold 15.8 V, turn-off 9.5 V.
11 GND power_in Analog ground. Common ground for adjustment components, sensing networks and driver outputs.
12 MLOWER output Low-side driver output. Drives the lower half-bridge MOSFET. Absolute max -0.3 to VCC+0.3 V.
14 MUPPER output High-side (floating) driver output. Drives the upper half-bridge MOSFET, referenced to HB. Absolute max VHB-0.3 to VBOOT+0.3 V.
15 HB power_in Half-bridge (high-side floating return). Connects to the switching node between the two half-bridge MOSFETs. Absolute max VBOOT-20 to VBOOT+0.3 V.
16 VBOOT power_in Bootstrap pin - floating VCC supply for the upper (high-side) driver stage. Absolute max -0.3 to 620 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-16-EP
Category PMIC
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • NCP1399AADR2G

CAD (KiCad official)

  • Symbol: NCP1399AADR2G
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-EP (KiCad packages3D, STEP)
  • 3D model files: ncp1399aadr2g-etched.step / ncp1399aadr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1399aadr2g.step / ncp1399aadr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (46 pp, sha256 6d7b37a399261c52, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF