component
Z0109-NN
Public Made by Adomby adom
WEIDA Thyristors (SCR)/Modules, SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownZ0109-NN
WEIDA · Thyristors (SCR)/Modules · SOT-223
Z0109-NN from WEIDA, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T1 | passive | Main terminal 1 of the triac (MT1), the reference terminal for gate triggering; the device is rated 1 A RMS on-state current (IT(RMS)). |
| 2 | T2 | passive | Main terminal 2 of the triac (MT2), also the tab; the device is rated 600/800 V VDRM/VRRM and 1 A RMS on-state current. |
| 3 | G | input | Gate trigger input; peak gate current IGM is 2 A, average gate power PG(AV) is 0.5 W, peak gate power PGM is 5 W, and VGT is 1.3 V max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WEIDA |
| Package | SOT-223 |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On-state gate trigger current, quadrants I-II-III | IGT | 10 | mA | VD=12V, RL=33Ω, Z0109 (09 column) | 2 | ||
| On-state gate trigger current, quadrant IV | IGT | 10 | mA | VD=12V, RL=33Ω, Z0109 (09 column) | 2 | ||
| Gate trigger voltage, quadrants I-II-III-IV | VGT | 1.3 | V | Ⅰ-Ⅱ-Ⅲ-Ⅳ | 2 | ||
| Gate non-trigger voltage | VGD | 0.2 | V | VD=VDRM, Tj=125℃, RL=3.3kΩ, Ⅰ-Ⅱ-Ⅲ-Ⅳ | 2 | ||
| Holding current | IH | 10 | mA | IT=100mA | 2 | ||
| Latching current, quadrants I-III-IV | IL | 10 | mA | IG=1.2IGT, Ⅰ-Ⅲ-Ⅳ | 2 | ||
| Latching current, quadrant II | IL | 15 | mA | IG=1.2IGT, Ⅱ | 2 | ||
| Critical rate of rise of off-state voltage | dV/dt | 50 | V/µs | VD=0.66×VDRM, Tj=125℃, gate open | 2 | ||
| On-state voltage | VTM | 1.5 | V | ITM=1.4A, tp=380μs, Tj=25℃ | 2 | ||
| Repetitive peak off-state current | IDRM | 5 | µA | VDRM=VRRM, Tj=25℃ | 2 | ||
| Repetitive peak reverse current | IRRM | 5 | µA | VRRM=VDRM, Tj=25℃ | 2 | ||
| Repetitive peak off-state current at high temperature | IDRM | 0.5 | mA | VDRM=VRRM, Tj=125℃ | 2 | ||
| Repetitive peak reverse current at high temperature | IRRM | 0.5 | mA | VRRM=VDRM, Tj=125℃ | 2 | ||
| Storage junction temperature range | Tstg | -40 | 150 | ℃ | 1 | ||
| Operating junction temperature range | Tj | -40 | 125 | ℃ | 1 | ||
| Repetitive peak off-state voltage | VDRM | 800 | V | Tj=25℃, N (800V) variant | 1 | ||
| Repetitive peak reverse voltage | VRRM | 800 | V | Tj=25℃, N (800V) variant | 1 | ||
| RMS on-state current | IT(RMS) | 1 | A | 1 | |||
| Non repetitive surge peak on-state current | ITSM | 16 | A | full cycle, F=50Hz | 1 | ||
| I2t value for fusing | I2t | 1.28 | A2s | tp=10ms | 1 | ||
| Critical rate of rise of on-state current, quadrants I-II-III | dI/dt | 50 | A/µs | IG=2×IGT, Ⅰ-Ⅱ-Ⅲ | 1 | ||
| Critical rate of rise of on-state current, quadrant IV | dI/dt | 10 | A/µs | IG=2×IGT, Ⅳ | 1 | ||
| Peak gate current | IGM | 2 | A | 1 | |||
| Average gate power dissipation | PG(AV) | 0.5 | W | 1 | |||
| Peak gate power | PGM | 5 | W | 1 | |||
| Thermal resistance junction to case (AC), SOT-223-2L | Rth(j-c) | 31 | ℃/W | SOT-89-2L/SOT-223-2L package, AC | 2 |
CAD (KiCad official)
- Symbol:
Z0109-NN - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
z0109-nn-etched.step/z0109-nn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);z0109-nn.step/z0109-nn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WEIDA datasheet (6 pp, sha256
01092a0905f19da1, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).