3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBTA08-800BWRG
STMicroelectronics · Thyristors (SCR)/Modules · TO-220AB
BTA08-800BWRG from STMicroelectronics, in a TO-220AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | passive | Main Terminal 1 (MT1); one side of the bidirectional AC conduction path; IT(RMS) 8 A max at Tc = 100 °C (TO-220AB Ins.), VDRM/VRRM 800 V, non-repetitive surge ITSM 80 A (50 Hz, 20 ms). |
| 2 | A2 | passive | Main Terminal 2 (MT2); opposite side of the bidirectional AC conduction path; internally connected to the heatsink tab which is electrically isolated from the mounting surface via ceramic pad rated 2500 VRMS (BTA insulated series), VDRM/VRRM 800 V. |
| 3 | G | input | Gate trigger input; IGT max 50 mA (Q1-Q3, VD = 12 V, RL = 33 Ω), VGT max 1.3 V, IGM peak 4 A (tp ≤ 20 µs, Tj = 125 °C), average gate power dissipation PG(AV) max 1 W at Tj = 125 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220AB |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gate trigger voltage (quadrants I-II-III) | VGT | 1.2 | V | 2 | |||
| Gate non-trigger voltage | VGD | 0.2 | V | VD = VDRM, RL = 3.3 kΩ, Tj = 125 °C | 2 | ||
| Gate trigger current (quadrants I-II-III, BW column) | IGT | 50 | mA | VD = 12 V, RL = 30 Ω | 2 | ||
| Holding current (BW column) | IH | 50 | mA | IT = 100 mA | 2 | ||
| Latching current, quadrants I and III (BW column) | IL | 70 | mA | IG = 1.2 x IGT, quadrants I-III | 2 | ||
| Latching current, quadrant II (BW column) | IL | 80 | mA | IG = 1.2 x IGT, quadrant II | 2 | ||
| Critical rate of rise of off-state voltage (BW column) | dV/dt | 1000 | V/µs | VD = 67% VDRM, gate open, Tj = 125 °C | 2 | ||
| On-state voltage | VTM | 1.55 | V | ITM = 11 A, tp = 380 µs, Tj = 25 °C | 3 | ||
| Threshold on-state voltage | VTO | 0.85 | V | Tj = 125 °C | 3 | ||
| Dynamic resistance | RD | 50 | mΩ | Tj = 125 °C | 3 | ||
| Off-state and reverse leakage current | IDRM/IRRM | 5 | µA | VDRM = VRRM, Tj = 25 °C | 3 | ||
| Off-state and reverse leakage current | IDRM/IRRM | 1 | mA | VDRM = VRRM, Tj = 125 °C | 3 | ||
| RMS on-state current (TO-220AB Insulated) | IT(RMS) | 8 | A | full sine wave, Tc = 100 °C | 2 | ||
| Non repetitive surge peak on-state current | ITSM | 80 | A | f = 50 Hz, t = 20 ms, full cycle, Tj initial = 25 °C | 2 | ||
| Non repetitive surge peak on-state current | ITSM | 84 | A | f = 60 Hz, tp = 16.7 ms, full cycle, Tj initial = 25 °C | 2 | ||
| I2t value for fusing | I2t | 36 | A2s | tp = 10 ms | 2 | ||
| Critical rate of rise of on-state current | dI/dt | 50 | A/µs | IG = 2 x IGT, tr ≤ 100 ns, f = 120 Hz, Tj = 125 °C | 2 | ||
| Peak gate current | IGM | 4 | A | tp = 20 µs, Tj = 125 °C | 2 | ||
| Average gate power dissipation | PG(AV) | 1 | W | Tj = 125 °C | 2 | ||
| Storage junction temperature range | Tstg | -40 | 150 | °C | 2 | ||
| Operating junction temperature range | Tj | -40 | 125 | °C | 2 | ||
| Junction to case thermal resistance (AC), TO-220AB Insulated | Rth(j-c) | 2.5 | °C/W | AC, TO-220AB Insulated | 3 | ||
| Junction to ambient thermal resistance, TO-220AB Insulated | Rth(j-a) | 60 | °C/W | TO-220AB / TO-220AB Insulated | 3 |
CAD (KiCad official)
- Symbol:
BTA08-800BWRG - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220AB (KiCad packages3D, STEP)
- 3D model files:
bta08-800bwrg-etched.step/bta08-800bwrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bta08-800bwrg.step/bta08-800bwrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
a75018e9bb145502, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).