3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90363KGO-ABB-000-SP
Melexis · Magnetic Sensors · TSSOP-16
MLX90363KGO-ABB-000-SP from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDEC1 | bidirectional | Die 1 decoupling pin for the internal regulator; in the 5V application it takes a decoupling capacitor, and absolute maximum supply voltage on VDEC is 3.6 V. |
| 2 | VSS1 | power_in | Analog ground for die 1. |
| 3 | VDD1 | power_in | Supply for die 1, 4.5 V to 5.5 V in the 5V application or 3.15 V to 3.45 V in the 3V3 application, with an absolute maximum of 18 V. |
| 4 | MISO1 | output | Digital SPI master-in slave-out output for die 1, driving VOH of at least VDD − 0.4 V at 0.5 mA and VOL of at most 0.4 V; the output is disabled when VDD exceeds the MISO switch-off threshold. |
| 5 | Test2 | bidirectional | Test pin for die 2, which should be connected to ground for optimal EMC behavior if unused. |
| 6 | SCLK2 | input | SPI clock input for die 2, with logic-high input at 65% of VDD minimum and logic-low at 35% of VDD maximum. |
| 7 | /SS2 | input | SPI slave select input for die 2 (active low). |
| 8 | MOSI2 | input | SPI master-out slave-in input for die 2, with logic-high input at 65% of VDD minimum and logic-low at 35% of VDD maximum. |
| 9 | VDEC2 | bidirectional | Die 2 decoupling pin for the internal regulator; in the 5V application it takes a decoupling capacitor, and absolute maximum supply voltage on VDEC is 3.6 V. |
| 10 | VSS2 | power_in | Analog ground for die 2. |
| 11 | VDD2 | power_in | Supply for die 2, 4.5 V to 5.5 V in the 5V application or 3.15 V to 3.45 V in the 3V3 application, with an absolute maximum of 18 V. |
| 12 | MISO2 | output | Digital SPI master-in slave-out output for die 2, driving VOH of at least VDD − 0.4 V at 0.5 mA and VOL of at most 0.4 V; the output is disabled when VDD exceeds the MISO switch-off threshold. |
| 13 | Test1 | bidirectional | Test pin for die 1, which should be connected to ground for optimal EMC behavior if unused. |
| 14 | SCLK1 | input | SPI clock input for die 1, with logic-high input at 65% of VDD minimum and logic-low at 35% of VDD maximum. |
| 15 | /SS1 | input | SPI slave select input for die 1 (active low). |
| 16 | MOSI1 | input | SPI master-out slave-in input for die 1, with logic-high input at 65% of VDD minimum and logic-low at 35% of VDD maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSSOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nominal Supply Voltage, 5V Application | VDD5 | 4.5 | 5 | 5.5 | V | 5V Application | 9 |
| Nominal Supply Voltage, 3V3 Application | VDD33 | 3.15 | 3.3 | 3.45 | V | 3V3 Application | 9 |
| Supply Current (dual die, footnote 1: multiplied by 2 for dual version) | IDD | 12.5 | 15.5 | mA | 9 | ||
| Standby Current | ISTANDBY | 3.5 | 4.5 | mA | 9 | ||
| Supply Current at VDD MAX | IDDMAX | 18 | mA | VDD = 18V | 9 | ||
| POR Rising Level | POR LH | 2.6 | 2.8 | 3.1 | V | Voltage referred to VDEC | 9 |
| POR Falling Level | POR HL | 2.5 | 2.7 | 2.9 | V | Voltage referred to VDEC | 9 |
| POR Hysteresis | POR Hyst | 0.1 | V | Voltage referred to VDEC | 9 | ||
| MISO Switch Off Rising Level | MT8V LH | 7.5 | 9.5 | V | VDD level for disabling MISO (above this, no SPI communication is possible) | 9 | |
| MISO Switch Off Falling Level | MT8V HL | 6 | 7.5 | V | VDD level for disabling MISO | 9 | |
| MISO Switch Off Hysteresis | MT8VHyst | 1 | 2 | V | VDD level for disabling MISO | 9 | |
| Input Capacitance | CIN | 20 | pF | Referred to GND | 9 | ||
| Output Low Voltage Level | VOL | 0.4 | V | Current Drive IOH = 0.5 mA (as printed) | 9 | ||
| Output High Short Circuit Current | IshortH | 20 | 30 | mA | VOUT forced to 0V | 9 | |
| Output Low Short Circuit Current | IshortL | 25 | 30 | mA | VOUT forced to VDD | 9 | |
| MISO Rise Time | 35 | 60 | ns | CL = 30 pF, RL = 10 kΩ | 12 | ||
| MISO Fall Time | 35 | 60 | ns | CL = 30 pF, RL = 10 kΩ | 12 | ||
| Magnetic Flux Density Frequency, FR = 862 s-1 | FR | 24 | Hz | FR = 862 s-1 (limitation linked to AGC) | 12 | ||
| Magnetic Flux Density Frequency, FR = 430 s-1 | FR | 12 | Hz | FR = 430 s-1 (limitation linked to AGC) | 12 | ||
| Magnetic Flux Density Frequency, FR = 215 s-1 | FR | 4.8 | Hz | FR = 215 s-1 (limitation linked to AGC) | 12 | ||
| Offset on the Raw Signals X, Y and Z | X0, Y0, Z0 | -30 | 30 | LSB14 | TA = 25 Deg.C | 12 | |
| Mismatch on the Raw Signals, between X and Y | SMISMXY | -1 | 1 | % | TA = 25 Deg.C | 12 | |
| Mismatch on the Raw Signals, between X and Z | SMISMXZ | -30 | 30 | % | TA = 25 Deg.C | 12 | |
| Mismatch on the Raw Signals, between Y and Z | SMISMYZ | -30 | 30 | % | TA = 25 Deg.C | 12 | |
| Magnetic Angle Phase Error, between X and Y | ORTHXY | -0.3 | 0.3 | Deg. | TA = 25 Deg.C | 12 | |
| Magnetic Angle Phase Error, between X and Z | ORTHXZ | -10 | 10 | Deg. | TA = 25 Deg.C | 12 | |
| Magnetic Angle Phase Error, between Y and Z | ORTHYZ | -10 | 10 | Deg. | TA = 25 Deg.C | 12 | |
| Intrinsic Linearity Error, Magnetic Angle ∠XY | Le | -1 | 1 | Deg. | TA = 25 Deg.C | 13 | |
| Intrinsic Linearity Error, Magnetic Angle ∠XZ, ∠YZ | Le | -20 | 20 | Deg. | TA = 25 Deg.C | 13 | |
| Supply Dependency, 5V Application | -0.1 | 0.1 | Deg. | VDD = 4.5 … 5.5 V | 13 | ||
| Supply Dependency, 3V3 Application, 20 mT | -0.8 | 0.8 | Deg. | VDD = 3.20 … 3.40 V, 20 mT, Temperature suffix E and K | 13 | ||
| Supply Dependency, 3V3 Application, 50 mT | -0.4 | 0.4 | Deg. | VDD = 3.20 … 3.40 V, 50 mT, Temperature suffix E and K | 13 | ||
| Thermal Offset Drift | -30 | 30 | LSB14 | Temperature suffix E and K | 13 | ||
| Thermal Drift of Sensitivity Mismatch, XY, XZ, YZ axis | -0.5 | 0.5 | % | Temperature suffix E and K | 13 | ||
| Thermal Drift of Magnetic Angle Phase Error, XY, XZ, YZ axis | -0.1 | 0.1 | Deg. | XY axis, XZ axis, YZ axis | 13 | ||
| Magnetic Angle Noise, 20mT, No Filter | 0.2 | Deg. | Temperature suffix E and K, 20mT, No Filter (±3σ over 1000 acquisitions) | 14 | |||
| Magnetic Angle Noise, 50mT, No Filter | 0.1 | Deg. | Temperature suffix E and K, 50mT, No Filter (±3σ over 1000 acquisitions) | 14 | |||
| Magnetic Angle Noise, 50mT, FILTER = 1 | 0.07 | Deg. | Temperature suffix E and K, 50mT, FILTER = 1 (±3σ over 1000 acquisitions) | 14 | |||
| Raw signals X, Y, Z Noise, 20mT, No Filter | 12 | LSB14 | Temperature suffix E and K, 20mT, No Filter (±3σ over 1000 acquisitions) | 14 | |||
| Raw signals X, Y, Z Noise, 50mT, No Filter | 6 | LSB14 | Temperature suffix E and K, 50mT, No Filter (±3σ over 1000 acquisitions) | 14 | |||
| Raw signals X, Y, Z Noise, 50mT, FILTER = 1 | 4 | LSB14 | Temperature suffix E and K, 50mT, FILTER = 1 (±3σ over 1000 acquisitions) | 14 | |||
| Magnetic Flux Density in X or Y | BX, BY | 20 | 50 | 70 | mT | 14 | |
| Magnetic Flux Density in Z | BZ | 24 | 75 | 126 | mT | 14 | |
| Magnet Temperature Coefficient | TCm | -2400 | 0 | ppm/Deg.C | 14 | ||
| IMC Gain in X and Y | GainIMCXY | 1.2 | 1.4 | 1.8 | Overall variation; part-to-part ±10% within a lot | 14 | |
| IMC Gain in Z | GainIMCZ | 1.1 | 1.3 | 14 | |||
| k factor | k | 1 | 1.2 | 1.5 | k = GainIMCXY / GainIMCZ | 14 | |
| Supply Voltage, VDD | 18 | V | 8 | ||||
| Reverse VDD Voltage | -0.3 | V | 8 | ||||
| Supply Voltage, VDEC | 3.6 | V | 8 | ||||
| Reverse VDEC Voltage | -0.3 | V | 8 | ||||
| Positive Input Voltage | 11 | V | 8 | ||||
| Reverse Input Voltage | -11 | V | 8 | ||||
| Reverse Output Voltage | -0.3 | V | 8 | ||||
| Operating Ambient Temperature Range, TA | TA | -40 | 150 | Deg.C | 8 | ||
| Storage Temperature Range, TS | TS | -40 | 150 | Deg.C | 8 | ||
| Magnetic Flux Density | -700 | 700 | mT | 8 | |||
| Temperature range for temperature code K | -40 | 125 | Deg.C | Temperature Code K (ordering legend) | 2 |
CAD (KiCad official)
- Symbol:
MLX90363KGO-ABB-000-SP - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mlx90363kgo-abb-000-sp-etched.step/mlx90363kgo-abb-000-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90363kgo-abb-000-sp.step/mlx90363kgo-abb-000-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (62 pp, sha256
c24939cb1c7ab2e4, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).