Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OB3398MP

OB(On-Bright Elec) · LED Drivers · SOT23-5

OB3398MP from OB(On-Bright Elec), in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GATE output Gate driver output that drives the power MOSFET, with output low level VOL of 1 V and output high level VOH of 6 V at VDD=14 V, and output clamp voltage of 10 V.
2 CS input Current sense input that receives the switch current through the sense resistor Rs, with over current threshold Vth_oc of 492 to 508 mV (500 mV typ.) and LEB time of 500 ns.
3 VDD power_in Power supply input with recommended VDD supply voltage of 12 to 25 V, UVLO(ON) of 7.3 to 9.3 V falling and UVLO(OFF) of 15.5 to 17.5 V rising, and maximum VDD operation voltage (VDD_clamp) of 25 V.
4 FB input Feedback input connected to a resistor divider from the primary or auxiliary winding to reflect output voltage, regulated at 1.2 V typ. with an over-voltage protection threshold of about 1.4 V typ.
5 GND power_in Ground reference pin for the controller.

Key specifications

Parameter Value
Manufacturer OB(On-Bright Elec)
Package SOT23-5
Category LED Drivers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Startup Current I startup 4 20 uA VDD=UVLO_OFF-1V 5
Operation Current I DD op 0.45 1 mA FB=1V, CS=0V, VDD=20V 5
VDD Under Voltage Lockout (ON) UVLO(ON) 7.3 8.3 9.3 V Enter VDD falling 5
VDD Under Voltage Lockout (OFF) UVLO(OFF) 15.5 16.5 17.5 V Exit VDD rising 5
Maximum VDD operation voltage VDD_clamp 25 V IDD=20mA 5
LEB time TLEB 500 ns 5
Over current threshold Vth_oc 492 500 508 mV 5
OCP Propagation delay Td_oc 100 ns 5
IC Maximum frequency Freq_Max 103 KHz Internal maximum clock frequency (see note 1) 5
Minimum Toff Toff_min 4 us 5
Minimum frequency F_min 103 Hz 5
Frequency shuffling range Δf/Freq -7 7 % 5
Reference voltage for EA Vref_EA 1.14 1.2 1.26 V 5
DC gain of EA Gain 40 5
Load OVP threshold voltage Vth_OVP 1.4 V 5
Output low level VOL 1 V VDD=14V, Io=5mA 5
Output high level VOH 6 V VDD=14V, Io=20mA 5
Output clamp voltage V_clamping 10 V 5
Output rising time T_r 95 ns 1V~9V @ CL=500pF 5
Output falling time T_f 50 ns 9V~1V @ CL=500pF 5
Over temperature protection trigger point T_otp 135 ℃ 5
Over temperature protection recovery point T_otp_rec 120 ℃ 5
Gate Voltage -0.3 25 V 2
VDD Voltage -0.3 V Upper limit is VDD_clamp 2
CS Input Voltage -0.3 7 V 2
FB Input Voltage -0.3 7 V 2
Operating Junction Temperature TJ -40 150 ℃ 2
Operating Ambient Temperature TA -40 85 ℃ 2
Storage Temperature Tstg -55 150 ℃ 2
Lead Temperature (Soldering) 260 ℃ 10 secs 2
VDD Supply Voltage VDD 12 25 V 2
Thermal resistance junction-to-ambient, SOT23-5 RθJA 200 ℃/W SOT23-5 2

CAD (KiCad official)

  • Symbol: OB3398MP
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.225 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ob3398mp-etched.step / ob3398mp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ob3398mp.step / ob3398mp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB(On-Bright Elec) datasheet (10 pp, sha256 e7ea5aefccaa465e, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF