3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F689T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil
PIC16F689T-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; device operates from 2.0V to 5.5V. |
| 2 | RA5/T1CKI/OSC1/CLKIN | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also Timer1 clock input, crystal/resonator OSC1 and external clock/RC input CLKIN. |
| 3 | RA4/AN3/T1G/OSC2/CLKOUT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 3 input, Timer1 gate input, crystal OSC2 and FOSC/4 CLKOUT output. |
| 4 | RA3/MCLR/VPP | input | General purpose input with interrupt-on-change, Master Clear with internal pull-up, or high-voltage programming voltage VPP. |
| 5 | RC5 | bidirectional | General purpose I/O. |
| 6 | RC4/C2OUT | bidirectional | General purpose I/O or Comparator C2 output. |
| 7 | RC3/AN7/C12IN3- | bidirectional | General purpose I/O, A/D channel 7 input, or Comparator C1 or C2 negative input. |
| 8 | RC6/AN8/SS | bidirectional | General purpose I/O, A/D channel 8 input, or SPI Slave Select input. |
| 9 | RC7/AN9/SDO | bidirectional | General purpose I/O, A/D channel 9 input, or SPI data output. |
| 10 | RB7/TX/CK | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also EUSART asynchronous output TX or synchronous clock CK. |
| 11 | RB6/SCK/SCL | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also SPI clock SCK or I2C clock SCL (open drain). |
| 12 | RB5/AN11/RX/DT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 11 input, EUSART asynchronous input RX or synchronous data DT. |
| 13 | RB4/AN10/SDI/SDA | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 10 input, SPI data input SDI or I2C data SDA (open drain). |
| 14 | RC2/AN6/C12IN2- | bidirectional | General purpose I/O, A/D channel 6 input, or Comparator C1 or C2 negative input. |
| 15 | RC1/AN5/C12IN1- | bidirectional | General purpose I/O, A/D channel 5 input, or Comparator C1 or C2 negative input. |
| 16 | RC0/AN4/C2IN+ | bidirectional | General purpose I/O, A/D channel 4 input, or Comparator C2 positive input. |
| 17 | RA2/AN2/T0CKI/INT/C1OUT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 2 input, Timer0 clock input, external interrupt and Comparator C1 output. |
| 18 | RA1/AN1/C12IN0-/VREF/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 1 input, Comparator C1 or C2 negative input, external A/D voltage reference VREF and ICSP clock. |
| 19 | RA0/AN0/C1IN+/ICSPDAT/ULPWU | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 0 input, Comparator C1 positive input, ICSP data I/O and Ultra Low-Power Wake-up input. |
| 20 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | 5.5 | V | FOSC <= 8 MHz: HFINTOSC, EC | 227 | |
| Supply Voltage (20 MHz) | VDD | 4.5 | 5.5 | V | FOSC <= 20 MHz | 227 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 227 | ||
| VDD Rise Rate for POR | SVDD | 0.05 | V/ms | 227 | |||
| Operating temperature industrial | TA | -40 | 85 | °C | industrial | 227 | |
| Supply Current LP 32 kHz | IDD | 33 | 60 | µA | FOSC = 32 kHz LP mode, VDD = 5.0V | 228 | |
| Supply Current XT 4 MHz | IDD | 0.8 | 1.1 | mA | FOSC = 4 MHz XT mode, VDD = 5.0V | 228 | |
| Supply Current HFINTOSC 8 MHz | IDD | 1.3 | 1.65 | mA | FOSC = 8 MHz HFINTOSC, VDD = 5.0V | 228 | |
| Supply Current HS 20 MHz | IDD | 4 | 5.45 | mA | FOSC = 20 MHz HS mode, VDD = 5.0V | 228 | |
| Power-down Base Current 2.0V | IPD | 0.05 | 1.2 | µA | WDT, BOR, Comparators, VREF and T1OSC disabled, VDD = 2.0V | 229 | |
| Power-down Base Current 5.0V | IPD | 0.35 | 1.8 | µA | WDT, BOR, Comparators, VREF and T1OSC disabled, VDD = 5.0V | 229 | |
| Power-down Base Current 3.0V cold | IPD | 90 | 500 | nA | VDD = 3.0V, -40°C <= TA <= +25°C | 229 | |
| WDT Current 5.0V | 3 | 7 | µA | VDD = 5.0V | 229 | ||
| BOR Current 5.0V | 85 | 122 | µA | VDD = 5.0V | 229 | ||
| Comparator Current 5.0V | 120 | 160 | µA | both comparators enabled, VDD = 5.0V | 229 | ||
| A/D Current 5.0V | 0.36 | 1.9 | µA | no conversion in progress, VDD = 5.0V | 229 | ||
| Input Low Voltage TTL | VIL | 0.8 | V | I/O port with TTL buffer, 4.5V <= VDD <= 5.5V | 231 | ||
| Input High Voltage TTL | VIH | 2 | V | I/O port with TTL buffer, 4.5V <= VDD <= 5.5V | 231 | ||
| Input High Voltage OSC1 XT/LP | VIH | 1.6 | V | OSC1 (XT and LP modes) | 231 | ||
| Input Leakage I/O ports | IIL | 0.1 | 1 | µA | VSS <= VPIN <= VDD, pin at high-impedance | 231 | |
| Input Leakage MCLR | IIL | 0.1 | 5 | µA | VSS <= VPIN <= VDD | 231 | |
| PORTA Weak Pull-up Current | IPUR | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS | 231 |
| Output Low Voltage I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V (Ind.) | 231 | ||
| Load capacitance I/O pins | CIO | 50 | pF | All I/O pins | 232 | ||
| VDD for Flash Erase/Write | VPEW | 4.5 | 5.5 | V | 232 | ||
| Flash Erase/Write cycle time | TPEW | 2 | 2.5 | ms | 232 | ||
| Internal HFINTOSC Frequency 1% | HFOSC | 7.92 | 8 | 8.08 | MHz | VDD = 3.5V, 25°C | 236 |
| Internal HFINTOSC Frequency 5% | HFOSC | 7.6 | 8 | 8.4 | MHz | 2.0V <= VDD <= 5.5V, -40°C <= TA <= +85°C (Ind.) | 236 |
| LFINTOSC Frequency | LFOSC | 15 | 31 | 45 | kHz | 236 | |
| Watchdog Timer Time-out Period | TWDT | 10 | 17 | 25 | ms | VDD = 5V, -40°C to +85°C | 239 |
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | 239 | |
| Brown-out Reset Voltage | VBOR | 2 | 2.2 | V | 239 | ||
| Comparator Input Offset Voltage | VOS | 5 | 10 | mV | 242 | ||
| VR voltage output | VROUT | 0.5 | 0.6 | 0.7 | V | 242 | |
| ADC Resolution | NR | 10 | bits | 249 | |||
| ADC Integral Error | EIL | 1 | LSb | VREF = 5.12V | 249 | ||
| ADC Offset Error | EOFF | 1 | LSb | VREF = 5.12V | 249 | ||
| ADC Reference Voltage | VREF | 2.2 | V | Absolute minimum to ensure 1 LSb accuracy | 249 | ||
| Voltage on VDD | VDD | -0.3 | 6.5 | V | with respect to VSS | 225 | |
| Voltage on MCLR | -0.3 | 13.5 | V | with respect to VSS | 225 | ||
| Voltage on all other pins | -0.3 | V | with respect to VSS, max is (VDD + 0.3V) | 225 | |||
| Storage temperature | -65 | 150 | °C | 225 | |||
| Ambient temperature under bias | -40 | 125 | °C | 225 | |||
| Maximum current out of VSS pin | 300 | mA | 225 | ||||
| Maximum current into VDD pin | 250 | mA | 225 | ||||
| Max output current sunk by any I/O pin | 25 | mA | 225 | ||||
| Max output current sourced by any I/O pin | 25 | mA | 225 | ||||
| Thermal Resistance Junction to Ambient | θJA | 108.1 | °C/W | 20-pin SSOP package | 233 | ||
| Thermal Resistance Junction to Case | θJC | 32.2 | °C/W | 20-pin SSOP package | 233 | ||
| Die Temperature | TDIE | 150 | °C | For derated power calculations | 233 |
CAD (KiCad official)
- Symbol:
PIC16F689T-I - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f689t-i-etched.step/pic16f689t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f689t-i.step/pic16f689t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (298 pp, sha256
e501369e180e27c1, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).