Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCA9515BDGKR

Texas Instruments · Signal Buffers, Repeaters, Splitters · MSOP-8

PCA9515BDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 SCL0 bidirectional Serial clock bus 0 is an open-drain I2C/SMBus clock line that is 5.5-V tolerant.
3 SDA0 bidirectional Serial data bus 0 is an open-drain I2C/SMBus data line that is 5.5-V tolerant.
4 GND power_in Supply ground for the device.
5 EN input Active-high repeater enable input with an internal pull-up to VCC; it must be pulled to GND to disable the repeater and isolate the buses.
6 SDA1 bidirectional Serial data bus 1 is an open-drain I2C/SMBus data line that is 5.5-V tolerant.
7 SCL1 bidirectional Serial clock bus 1 is an open-drain I2C/SMBus clock line that is 5.5-V tolerant.
8 VCC power_in Supply power input, requiring 2.3 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 7 V 4
Enable input voltage VI -0.5 7 V 4
I2C bus voltage VI/O -0.5 7 V 4
Input clamp current IIK -50 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Continuous output current IO -50 50 mA 4
Continuous current through VCC or GND -100 100 mA 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC 2.3 3.6 V 4
High-level input voltage, SDA and SCL inputs VIH 5.5 V SDA and SCL inputs; min printed as 0.7 × VCC 4
High-level input voltage, EN input VIH 2 5.5 V EN input 4
Low-level input voltage, SDA and SCL inputs VIL -0.5 V SDA and SCL inputs; max printed as 0.3 × VCC 4
Low-level input voltage, EN input VIL -0.5 0.8 V EN input 4
SDA and SCL low-level input voltage contention VILc -0.5 0.4 V 4
Low-level output current IOL 6 mA VCC = 2.3 V 4
Operating free-air temperature TA -40 85 °C 4
Input diode clamp voltage VIK -1.2 V II = -18 mA; VCC 2.3 V to 3.6 V 5
Low-level output voltage VOL 0.47 0.52 0.6 V SDAx, SCLx IOL = 20 μA or 6 mA; VCC 2.3 V to 3.6 V 5
Low-level input voltage below low-level output voltage VOL, VILc 120 mV SDAx, SCLx guaranteed by design; VCC 2.3 V to 3.6 V 5
Quiescent supply current, both channels high ICC 0.5 3 mA Both channels high, SDAx = SCLx = VCC; VCC = 2.7 V 5
Quiescent supply current, both channels low ICC 1 4 mA Both channels low, SDA0 = SCL0 = GND and SDA1 = SCL1 = open, or SDA0 = SCL0 = open and SDA1 = SCL1 = GND; VCC = 2.7 V 5
Quiescent supply current, in contention ICC 1 4 mA In contention, SDAx = SCLx = GND; VCC = 2.7 V 5
Input current, SDAx and SCLx II -1 1 μA VI = 3.6 V; VCC 2.3 V to 3.6 V 5
Input current, SDAx and SCLx II 3 μA VI = 0.2 V 5
Input current, EN II -1 1 μA VI = VCC 5
Input current, EN II -20 -10 μA VI = 0.2 V 5
Leakage current, SDAx and SCLx Ioff 0.5 μA VI = 3.6 V; EN = L or H 0 V 5
Leakage current during power up, SDAx and SCLx II(ramp) 1 μA VI = 3.6 V; EN = L or H; 0 V to 2.3 V 5
Input capacitance, EN Cin 7 9 pF VI = 3 V or GND; 3.3 V 5
Input capacitance, SDAx and SCLx Cin 7 9 pF EN = H; 3.3 V 5
Setup time, EN↑ before Start condition tsu 100 ns VCC = 2.5 V ± 0.2 V 5
Hold time, EN↓ after Stop condition th 130 ns VCC = 2.5 V ± 0.2 V 5
Hold time, EN↓ after Stop condition th 100 ns VCC = 3.3 V ± 0.3 V 5
Propagation delay time, SDA0/SCL0 or SDA1/SCL1 to SDA1/SCL1 or SDA0/SCL0 (tPZL) tPZL 82 130 ns CL ≤ 100 pF; VCC = 2.5 V ± 0.2 V 5
Propagation delay time, SDA0/SCL0 or SDA1/SCL1 to SDA1/SCL1 or SDA0/SCL0 (tPZL) tPZL 68 120 ns CL ≤ 100 pF; VCC = 3.3 V ± 0.3 V 5
Propagation delay time, low-to-high-impedance (tPLZ) tPLZ 113 190 ns CL ≤ 100 pF; VCC = 2.5 V ± 0.2 V 5
Propagation delay time, low-to-high-impedance (tPLZ) tPLZ 102 180 ns CL ≤ 100 pF; VCC = 3.3 V ± 0.3 V 5
Thermal resistance, junction-to-ambient RθJA 170.8 °C/W DGK (VSSOP) 8 pins 4
Thermal resistance, junction-to-case (top) RθJC(top) 62.9 °C/W DGK (VSSOP) 8 pins 4
Thermal resistance, junction-to-board RθJB 91.6 °C/W DGK (VSSOP) 8 pins 4
Junction-to-top characterization parameter ψJT 9.5 °C/W DGK (VSSOP) 8 pins 4
Junction-to-board characterization parameter ψJB 90.2 °C/W DGK (VSSOP) 8 pins 4

CAD (KiCad official)

  • Symbol: PCA9515BDGKR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: pca9515bdgkr-etched.step / pca9515bdgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9515bdgkr.step / pca9515bdgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 9285bb8d6ea98153, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF