3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLMUN2132LT1G
LRC · Digital Transistors · SOT-23
LMUN2132LT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base is the input of the built-in bias network, with an integrated 4.7 kΩ series base resistor (R1) and a 4.7 kΩ base-emitter resistor (R2) for LMUN2132LT1G (marking A6J). |
| 2 | EMITTER | power_in | Emitter is the ground reference pin, labeled GROUND on the datasheet pinout, and the base-emitter resistor R2 is connected across it. |
| 3 | COLLECTOR | output | Collector is the output pin, rated at 50 Vdc for VCEO and 100 mAdc maximum collector current on the series maximum ratings table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Voltage | VCBO | 50 | Vdc | TA = 25°C | 1 | ||
| Collector-Emitter Voltage | VCEO | 50 | Vdc | TA = 25°C | 1 | ||
| Collector Current | IC | 100 | mAdc | TA = 25°C | 1 | ||
| Total Device Dissipation | PD | 246 | mW | TA = 25°C, FR-4 @ Minimum Pad (Note 1) | 1 | ||
| Total Device Dissipation | PD | 400 | mW | TA = 25°C, FR-4 @ 1.0 x 1.0 inch Pad (Note 2) | 1 | ||
| Derate above 25°C | PD | 1.5 | mW/°C | Derate above 25°C, FR-4 @ Minimum Pad (Note 1) | 1 | ||
| Derate above 25°C | PD | 2 | mW/°C | Derate above 25°C, FR-4 @ 1.0 x 1.0 inch Pad (Note 2) | 1 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 508 | °C/W | FR-4 @ Minimum Pad (Note 1) | 1 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 311 | °C/W | FR-4 @ 1.0 x 1.0 inch Pad (Note 2) | 1 | ||
| Thermal Resistance, Junction-to-Lead | RθJL | 174 | °C/W | FR-4 @ Minimum Pad (Note 1) | 1 | ||
| Thermal Resistance, Junction-to-Lead | RθJL | 208 | °C/W | FR-4 @ 1.0 x 1.0 inch Pad (Note 2) | 1 | ||
| Junction and Storage Temperature Range | TJ,Tstg | -55 | 150 | °C | 1 | ||
| Input Resistor R1 | R1 | 3.3 | 4.7 | 6.1 | kΩ | 3 | |
| Input Resistor R2 (nominal, device table) | R2 | 4.7 | kΩ | 2 | |||
| Resistor Ratio R1/R2 | R1/R2 | 0.8 | 1 | 1.2 | 3 | ||
| Collector-Base Cutoff Current | ICBO | 100 | nAdc | VCB = 50 V, IE = 0 | 2 | ||
| Collector-Emitter Cutoff Current | ICEO | 500 | nAdc | VCE = 50 V, IB = 0 | 2 | ||
| Emitter-Base Cutoff Current | IEBO | 2.3 | mAdc | VEB = 6.0 V, IC = 0 | 2 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | 50 | Vdc | IC = 10 µA, IE = 0 | 2 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CEO | 50 | Vdc | IC = 2.0 mA, IB = 0; Pulse Width < 300 µs, Duty Cycle < 2.0% | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.25 | Vdc | IC = 10 mA, IB = 1 mA (LMUN2115/2116/2132/2133/2134 group) | 3 | ||
| Output Voltage (on) | VOL | 0.2 | Vdc | VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kΩ | 3 | ||
| Output Voltage (off) | VOH | 4.9 | Vdc | VCC = 5.0 V, VB = 0.25 V, RL = 1.0 kΩ | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LMUN2132LT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmun2132lt1g-etched.step/lmun2132lt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmun2132lt1g.step/lmun2132lt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (8 pp, sha256
7ed6331a29163044, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).