3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT3085EDCB#TRMPBF
Analog Devices · Linear Voltage Regulators (LDO) · DFN-6-EP(2x3)
LT3085EDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Power output of the regulator; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability. |
| 2 | OUT | power_out | Power output of the regulator, to be connected in parallel with pin 1; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability. |
| 3 | SET | input | Non-inverting input to the error amplifier and regulation set point, where a fixed 10µA flows out through an external resistor to program VOUT; the SET pin is clamped to OUT with ±10V absolute maximum voltage and ±15mA absolute maximum current. |
| 4 | VCONTROL | power_in | Supply pin for the control circuitry, which must be at least 1.2V to 1.35V above VOUT for regulation; absolute maximum rating is 40V and -0.3V. |
| 5 | IN | power_in | Collector of the power device through which the output load current is supplied, which must be at least 0.1V to 0.5V above VOUT for regulation; absolute maximum rating is 40V and -0.3V. |
| 6 | IN | power_in | Collector of the power device through which the output load current is supplied, to be connected in parallel with pin 5; must be at least 0.1V to 0.5V above VOUT for regulation and absolute maximum rating is 40V and -0.3V. |
| 7 | OUT | power_out | Exposed pad is electrically OUT and must be soldered directly to VOUT on the PCB to pins 1 and 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Supply Chip |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SET Pin Current (25°C) | ISET | 9.9 | 10 | 10.1 | µA | VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C | 3 |
| SET Pin Current (over temperature) | ISET | 9.8 | 10 | 10.2 | µA | VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9) | 3 |
| Output Offset Voltage (VOUT, VSET) (25°C) | VOS | -1.5 | 1.5 | mV | VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C | 3 | |
| Output Offset Voltage (VOUT, VSET) (over temperature) | VOS | -3 | 3 | mV | VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9) | 3 | |
| Load Regulation, Offset Voltage | VOS | -1 | -0.6 | mV | ILOAD = 1mA to 500mA (Note 8) | 3 | |
| Line Regulation, SET Pin Current | ISET | 0.1 | 0.5 | nA/V | VIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA | 3 | |
| Minimum Load Current (VIN = VCONTROL = 10V) | 300 | 500 | µA | VIN = VCONTROL = 10V | 3 | ||
| Minimum Load Current (VIN = VCONTROL = 36V) | 1 | mA | VIN = VCONTROL = 36V | 3 | |||
| VCONTROL Dropout Voltage (100mA) | 1.2 | V | ILOAD = 100mA | 3 | |||
| VCONTROL Dropout Voltage (500mA) | 1.35 | 1.6 | V | ILOAD = 500mA | 3 | ||
| VIN Dropout Voltage (100mA) | 85 | 150 | mV | ILOAD = 100mA | 3 | ||
| VIN Dropout Voltage (500mA) | 275 | 450 | mV | ILOAD = 500mA | 3 | ||
| VCONTROL Pin Current (100mA) | 3 | 6 | mA | ILOAD = 100mA | 3 | ||
| VCONTROL Pin Current (500mA) | 8 | 15 | mA | ILOAD = 500mA | 3 | ||
| Current Limit | 500 | 650 | mA | VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V | 3 | ||
| Load Regulation, SET Pin Current | ISET | -0.1 | nA | ILOAD = 1mA to 500mA | 3 | ||
| Line Regulation, Offset Voltage | VOS | 0.003 | mV/V | VIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA | 3 | ||
| Input Voltage (IN pin, relative to VOUT) | VIN | -0.3 | 40 | V | All voltages relative to VOUT | 2 | |
| VCONTROL Pin Voltage (relative to VOUT) | VCONTROL | -0.3 | 40 | V | All voltages relative to VOUT | 2 | |
| SET Pin Current | ISET | -15 | 15 | mA | Note 7 | 2 | |
| SET Pin Voltage (relative to OUT) | -10 | 10 | V | Relative to OUT | 2 | ||
| Maximum Operating Junction Temperature (TJMAX) | TJMAX | 125 | °C | DCB package | 2 | ||
| Operating Junction Temperature Range (E grade) | -40 | 125 | °C | E grade (LT3085EDCB, Notes 2, 10) | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction-to-Ambient Thermal Resistance | θJA | 73 | °C/W | DCB package, value printed in package header | 2 | ||
| Junction-to-Case Thermal Resistance | θJC | 10.6 | °C/W | DCB package, value printed in package header | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | COPPER | Table 3. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE | 15 |
CAD (KiCad official)
- Symbol:
LT3085EDCB#TRMPBF - Footprint:
Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm - 3D model: DFN-6-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lt3085edcb-etched.step/lt3085edcb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3085edcb.step/lt3085edcb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
c5243716ea4c9cc7, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).