component
COS8552SR
Public Made by Adomby adom
COSINE Operational Amplifier, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownCOS8552SR
COSINE · Operational Amplifier · SOP-8
COS8552SR from COSINE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier A. Rail-to-rail output; swings to within ~5mV of each supply rail with RL=100kΩ (15mV with RL=10kΩ). Short-circuit source/sink current ±7mA. |
| 2 | -IN1 | input | Inverting input of amplifier A. Input common-mode voltage may range from -Vs - 0.3V to +Vs + 0.3V. Input bias current ±100pA typ. |
| 3 | +IN1 | input | Non-inverting input of amplifier A. Same voltage range as -IN1 (-Vs - 0.3V to +Vs + 0.3V); rail-to-rail input. |
| 4 | -Vs | power_in | Negative power supply or ground. If not tied to ground, bypass with a 0.1µF capacitor as close to the pin as possible. Total supply (+Vs to -Vs) is 1.8V to 5.5V (abs max 6V). |
| 5 | +IN2 | input | Non-inverting input of amplifier B. Rail-to-rail input; range -Vs - 0.3V to +Vs + 0.3V. |
| 6 | -IN2 | input | Inverting input of amplifier B. Rail-to-rail input; range -Vs - 0.3V to +Vs + 0.3V. |
| 7 | OUT2 | output | Output of amplifier B. Rail-to-rail output; swings to within ~5mV of each supply rail with RL=100kΩ. Short-circuit source/sink current ±7mA. |
| 8 | +Vs | power_in | Positive power supply, 1.8V to 5.5V (abs max 6V between +Vs and -Vs). Place a 0.1µF bypass capacitor as close to the pin as possible, between +Vs and -Vs or between +Vs and ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
COS8552SRACOS8552SRCOS8552SRBCOS8552SRCCOS8552SRDCOS8552MRACOS8552MRBCOS8552MRC
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply: +Vs to -Vs | 6 | V | 3 | ||||
| Input Voltage | -0.5 | 0.5 | V | referenced to -Vs and +Vs rails | 3 | ||
| Input Current | 10 | mA | footnote 2: input terminals diode-clamped to supply rails | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Operating Temperature Range | -40 | 125 | °C | 3 | |||
| ESD Susceptibility, HBM | 2000 | V | HBM | 3 | |||
| DC Supply Voltage | 1.8 | 5.5 | V | 3 | |||
| Operating ambient temperature | -40 | 85 | °C | 3 | |||
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.005 | 0.05 | μV/°C | -40°C to 125°C | 4 | |
| Input Bias Current | IB | -500 | 100 | 500 | pA | 4 | |
| Input Offset Current | IOS | -500 | 100 | 500 | pA | 4 | |
| Common-Mode Voltage Range | VCM | -0.1 | 5.6 | V | VS = 5.5V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 120 | dB | VCM =0.1V to 4.9V | 4 | ||
| Open-Loop Voltage Gain | AOL | 145 | dB | VO=0.2V to 4.8V | 4 | ||
| Output Voltage Swing from Rail | 5 | mV | RL=100kΩ | 4 | |||
| Output Voltage Swing from Rail | 15 | mV | RL=10kΩ | 4 | |||
| Short-Circuit Current, Sourcing | ISR | 7 | mA | 4 | |||
| Short-Circuit Current, Sinking | ISK | -7 | mA | 4 | |||
| Operating Voltage Range | 1.8 | 5.5 | V | 4 | |||
| Power Supply Rejection Ratio | PSRR | 80 | 100 | dB | VS = 1.8V to 5.5V | 4 | |
| Quiescent Current / Amplifier | IQ | 55 | μA | VS = 3.0V | 4 | ||
| Gain Bandwidth Product | GBWP | 1.5 | MHz | G=+1 | 4 | ||
| Slew Rate | SR | 0.9 | V/μs | G = +1, 2V Output Step | 4 | ||
| Voltage Noise Density | en | 50 | nV/√Hz | f=1kHz | 5 | ||
| Junction-to-ambient Thermal Resistance (SOP8) | RθJA | 155 | °C/W | SOP8 package | 3 |
CAD (KiCad official)
- Symbol:
COS8552SR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cos8552sr-etched.step/cos8552sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos8552sr.step/cos8552sr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
cos8552sr.step |
122 KB | You want the bare part, or you mark your own boards. |
cos8552sr-etched.step |
2.5 MB | You want the part with COS8552SR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 582 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (12 pp, sha256
845c61f20f164396, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).