component
PIC32MM0128GPM064-I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MM0128GPM064-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MM0128GPM064-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RP21/SDI3/RA7 | bidirectional | PORTA digital I/O RA7 (ST/DIG) that can also be remapped as PPS input RP21 or SPI3 data input SDI3. |
| 2 | CVREF/AN9/C3INB/RP16/VBUSON/RB14 | bidirectional | PORTB digital I/O RB14 (ST/DIG) that can also serve as the CVREF output, ADC channel AN9, comparator 3 input B, or VBUSON USB bus power control output (external USB transceiver mode only). |
| 3 | AN10/C3INA/REFCLKO/RP17/RB15(1) | bidirectional | PORTB digital I/O RB15 (ST/DIG), a high drive strength pin, that can also serve as ADC channel AN10, comparator 3 input A, or external reference clock output REFCLKO. |
| 4 | AVSS | power_in | Analog modules ground; AVSS must be connected regardless of ADC use. |
| 5 | AVDD | power_in | Analog modules power supply; AVDD must be connected regardless of ADC use. |
| 6 | AN16/U1CTS/RA13 | bidirectional | PORTA digital I/O RA13 (ST/DIG) that can also serve as ADC channel AN16 or UART1 Clear-to-Send input U1CTS. |
| 7 | AN17/OCM1A/RA12 | bidirectional | PORTA digital I/O RA12 (ST/DIG) that can also serve as ADC channel AN17 or MCCP1 output A. |
| 8 | AN18/RA11 | bidirectional | PORTA digital I/O RA11 (ST/DIG) that can also serve as ADC channel AN18. |
| 9 | MCLR | input | Master Clear input (ST) that generates a device Reset when pulled low and is also used for device programming and debugging. |
| 10 | AN19/U1RX/RA6 | bidirectional | PORTA digital I/O RA6 (ST/DIG) that can also serve as ADC channel AN19 or UART1 receive data input U1RX. |
| 11 | PGEC2/VREF+/CVREF+/AN0/RP1/RA0 | bidirectional | PORTA digital I/O RA0 (ST/DIG) that can also serve as ICSP Port 2 programming clock PGEC2, ADC positive reference VREF+, or ADC channel AN0. |
| 12 | PGED2/VREF-/AN1/RP2/OCM1F/RA1 | bidirectional | PORTA digital I/O RA1 (ST/DIG) that can also serve as ICSP Port 2 programming data PGED2, ADC negative reference VREF-, or ADC channel AN1. |
| 13 | PGED1/AN2/C1IND/C2INB/C3INC/RP6/OCM2C/RB0 | bidirectional | PORTB digital I/O RB0 (ST/DIG) that can also serve as ICSP Port 1 programming data PGED1, ADC channel AN2, or comparator inputs C1IND/C2INB/C3INC. |
| 14 | PGEC1/AN3/C1INC/C2INA/RP7/OCM2D/RB1 | bidirectional | PORTB digital I/O RB1 (ST/DIG) that can also serve as ICSP Port 1 programming clock PGEC1, ADC channel AN3, or comparator inputs C1INC/C2INA. |
| 15 | AN4/C1INB/RP8/SDA2/OCM2E/RB2 | bidirectional | PORTB digital I/O RB2 (ST/DIG) that can also serve as ADC channel AN4, comparator 1 input B, or I2C2 data SDA2 (I2C buffer). |
| 16 | TDI/AN11/C1INA/RP9/SCL2/OCM2F/RB3 | bidirectional | PORTB digital I/O RB3 (ST/DIG) that can also serve as JTAG data input TDI, ADC channel AN11, comparator 1 input A, or I2C2 clock SCL2. |
| 17 | VDD | power_in | Digital modules power supply. |
| 18 | VSS | power_in | Digital modules ground. |
| 19 | AN12/C2IND/T2CK/T2G/RC0 | bidirectional | PORTC digital I/O RC0 (ST/DIG) that can also serve as ADC channel AN12, comparator 2 input D, or Timer2 external clock T2CK and gate input T2G. |
| 20 | AN13/T3CK/T3G/RC1 | bidirectional | PORTC digital I/O RC1 (ST/DIG) that can also serve as ADC channel AN13, or Timer3 external clock T3CK and gate input T3G. |
| 21 | RP19/OCM2A/RC2 | bidirectional | PORTC digital I/O RC2 (ST/DIG) that can also serve as PPS remappable pin RP19 or MCCP2 output A. |
| 22 | SS3/FSYNC3/RC11 | bidirectional | PORTC digital I/O RC11 (ST/DIG) that can also serve as SPI3 slave select input SS3 or SPI3 frame signal FSYNC3. |
| 23 | VDD | power_in | Digital modules power supply. |
| 24 | VSS | power_in | Digital modules ground. |
| 25 | OSC1/CLKI/AN5/RP3/OCM1C/RA2 | passive | Primary Oscillator crystal input OSC1, which can alternatively act as external clock input CLKI (ST) in EC mode, also shared with ADC channel AN5, PPS RP3, MCCP1 output C and PORTA digital I/O RA2. |
| 26 | OSC2/CLKO/AN6/C3IND/RP4/RA3(1) | passive | Primary Oscillator crystal output OSC2, which can alternatively act as system clock output CLKO, a high drive strength pin also shared with ADC channel AN6, comparator 3 input D, PPS RP4 and PORTA digital I/O RA3. |
| 27 | SDO3/RA8(1) | bidirectional | PORTA digital I/O RA8 (ST/DIG), a high drive strength pin, that can also serve as SPI3 data output SDO3. |
| 28 | SOSCI/AN7/RP10/RB4 | passive | Secondary Oscillator crystal input SOSCI, also shared with ADC channel AN7, PPS RP10 and PORTB digital I/O RB4. |
| 29 | SOSCO/SCLKI/RP5/PWRLCLK/RA4 | passive | Secondary Oscillator crystal output SOSCO, which can alternatively act as digital clock input SCLKI or RTC 50/60 Hz clock input PWRLCLK, also shared with PPS RP5 and PORTA digital I/O RA4. |
| 30 | RP24/RA9 | bidirectional | PORTA digital I/O RA9 (ST/DIG) that can also serve as PPS remappable pin RP24. |
| 31 | SDI1/INT1/RD4 | bidirectional | PORTD digital I/O RD4 (ST/DIG) that can also serve as SPI1 data input SDI1 or external interrupt INT1. |
| 32 | SS1/FSYNC1/INT0/RD2 | bidirectional | PORTD digital I/O RD2 (ST/DIG) that can also serve as SPI1 slave select input SS1, SPI1 frame signal FSYNC1, or external interrupt INT0. |
| 33 | OCM3B/RD3 | bidirectional | PORTD digital I/O RD3 (DIG/ST) that can also serve as MCCP3 output B (OCM3B). |
| 34 | REFCLKI/T1CK/T1G/U1RTS/U1BCLK/SDO1/RD0(1) | bidirectional | PORTD digital I/O RD0 (ST/DIG), a high drive strength pin, that can also serve as external reference clock input REFCLKI, Timer1 clock/gate input T1CK/T1G, UART1 Ready-to-Send U1RTS, UART1 IrDA baud clock output U1BCLK, or SPI1 data output SDO1. |
| 35 | OCM2B/RC3 | bidirectional | PORTC digital I/O RC3 (ST/DIG) that can also serve as MCCP2 output B (OCM2B). |
| 36 | OCM1E/INT3/RC4 | bidirectional | PORTC digital I/O RC4 (ST/DIG) that can also serve as MCCP1 output E or external interrupt INT3. |
| 37 | AN15/OCM1D/RC5 | bidirectional | PORTC digital I/O RC5 (ST/DIG) that can also serve as ADC channel AN15 or MCCP1 output D. |
| 38 | VSS | power_in | Digital modules ground. |
| 39 | VDD | power_in | Digital modules power supply. |
| 40 | U1TX/RC12 | bidirectional | PORTC digital I/O RC12 (ST/DIG) that can also serve as UART1 transmit data output U1TX. |
| 41 | OCM3D/RC14 | bidirectional | PORTC digital I/O RC14 (ST/DIG) that can also serve as MCCP3 output D (OCM3D). |
| 42 | OCM3E/RC15 | bidirectional | PORTC digital I/O RC15 (ST/DIG) that can also serve as MCCP3 output E (OCM3E). |
| 43 | PGED3/RP11/ASDA1(2)/USBID/RB5 | bidirectional | PORTB digital I/O RB5 (ST/DIG) that can also serve as ICSP Port 3 programming data PGED3, PPS RP11, alternate I2C1 data ASDA1 (selected by the I2C1SEL configuration bit), or USB OTG ID input USBID (OTG mode only). |
| 44 | VBUS/RB6 | power_in | USB VBUS connection (5V nominal) that shares the pin with PORTB digital I/O RB6 (ST/DIG). |
| 45 | OCM3F/RC10 | bidirectional | PORTC digital I/O RC10 (ST/DIG) that can also serve as MCCP3 output F (OCM3F). |
| 46 | RP12/SDA3/RB7 | bidirectional | PORTB digital I/O RB7 (ST/DIG) that can also serve as PPS remappable pin RP12 or I2C3 data SDA3 (I2C buffer). |
| 47 | SCK1/RC13(1) | bidirectional | PORTC digital I/O RC13 (ST/DIG), a high drive strength pin, that can also serve as SPI1 clock SCK1. |
| 48 | TCK/RP13/SCL1/RB8(1) | bidirectional | PORTB digital I/O RB8 (ST/DIG), a high drive strength pin, that can also serve as JTAG clock input TCK (ST), PPS RP13, or I2C1 clock SCL1. |
| 49 | TMS/RP14/SDA1/INT2/RB9(1,3) | bidirectional | PORTB digital I/O RB9 (ST/DIG), a high drive strength pin, that can also serve as JTAG mode select TMS, PPS RP14, I2C1 data SDA1 or external interrupt INT2; this pin may toggle during ICSP programming. |
| 50 | RP23/RC6 | bidirectional | PORTC digital I/O RC6 (ST/DIG) that can also serve as PPS remappable pin RP23. |
| 51 | RP20/RC7 | bidirectional | PORTC digital I/O RC7 (ST/DIG) that can also serve as PPS remappable pin RP20. |
| 52 | AN14/LVDIN/C2INC/RC8 | bidirectional | PORTC digital I/O RC8 (ST/DIG) that can also serve as ADC channel AN14, High/Low-Voltage Detect input LVDIN, or comparator 2 input C. |
| 53 | OCM1B/RD1 | bidirectional | PORTD digital I/O RD1 (ST/DIG) that can also serve as MCCP1 output B (OCM1B). |
| 54 | OCM3A/RA5 | bidirectional | PORTA digital I/O RA5 (ST/DIG) that can also serve as MCCP3 output A (OCM3A). |
| 55 | PGEC3/TDO/RP18/ASCL1(2)/USBOEN/RC9(1) | bidirectional | PORTC digital I/O RC9 (ST/DIG), a high drive strength pin, that can also serve as ICSP Port 3 programming clock PGEC3, JTAG data output TDO, PPS RP18, alternate I2C1 clock ASCL1 (selected by the I2C1SEL configuration bit), or USB transceiver output enable USBOEN. |
| 56 | VCAP | passive | Core voltage regulator filter capacitor connection that must not be connected to VDD and requires a 10 µF capacitor connected to ground. |
| 57 | VDD | power_in | Digital modules power supply. |
| 58 | RTCC/RA15 | bidirectional | PORTA digital I/O RA15 (ST/DIG) that can also serve as RTCC alarm/seconds output RTCC (DIG). |
| 59 | OCM3C/RA14 | bidirectional | PORTA digital I/O RA14 (ST/DIG) that can also serve as MCCP3 output C (OCM3C). |
| 60 | D-/RB10 | bidirectional | USB transceiver differential minus line D- that shares the pin with PORTB digital I/O RB10 (ST/DIG). |
| 61 | D+/RB11 | bidirectional | USB transceiver differential plus line D+ that shares the pin with PORTB digital I/O RB11 (ST/DIG). |
| 62 | VUSB3V3 | power_in | USB transceiver power input (3.3V nominal) that must be powered for USB operation, with voltage kept in the 3.0V to 3.6V range. |
| 63 | AN8/RP15/SCL3/RB13(1) | bidirectional | PORTB digital I/O RB13 (ST/DIG), a high drive strength pin, that can also serve as ADC channel AN8, PPS RP15, or I2C3 clock SCL3. |
| 64 | RP22/SCK3/RA10(1) | bidirectional | PORTA digital I/O RA10 (ST/DIG), a high drive strength pin, that can also serve as PPS remappable pin RP22 or SPI3 clock SCK3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 283 | |||
| Storage temperature | -65 | 150 | °C | 283 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 283 | |||
| Voltage on any general purpose digital or analog pin (not 5.5V tolerant) with respect to VSS (upper limit printed as VDD + 0.3V) | -0.3 | V | 283 | ||||
| Voltage on 5.5V tolerant pin with respect to VSS | -0.3 | 4 | V | When VDD = 0V | 283 | ||
| Voltage on 5.5V tolerant pin with respect to VSS | -0.3 | 6 | V | When VDD ≥ 2.0V | 283 | ||
| Voltage on AVSS with respect to VSS | -0.3 | 0.3 | V | 283 | |||
| Maximum output current sunk by I/O pin | 11 | mA | 283 | ||||
| Maximum output current sourced by I/O pin with increased drive strength | 24 | mA | Increased-drive pins RA3, RA8, RA10, RB8, RB9, RB13, RB15, RC9, RC13, RD0 | 283 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 286 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 286 | ||
| VDD Start Voltage to Ensure Internal Power-on Reset Signal | VPOR | 100 | mV | 287 | |||
| DC25 Operating current, LPRC, FSYS = 32 kHz | IDD | 0.4 | 0.8 | mA | -40°C to +85°C, 2.0V | 288 | |
| DC61 Power-down current, Sleep with main VREG in Standby (VREGS=0, RETEN=0) | IPD | 4 | 17 | µA | -40°C, 3.3V | 290 | |
| Input leakage current, I/O pins 5V tolerant | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 291 | ||
| Input leakage current, I/O pins not 5V tolerant | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 291 | ||
| Input leakage current, MCLR | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD | 291 | ||
| Input leakage current, OSC1/CLKI | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, XT and HS modes | 291 | ||
| Input Low Injection Current | IICL | 0 | -5 | mA | Applies to all pins; printed min 0 and max -5 as shown in table | 292 | |
| Input High Injection Current | IICH | 0 | 5 | mA | Applies to all pins except 5V tolerant pins and SOSCI | 292 | |
| Total Input Injection Current (sum of all I/O and control pins) | IICT | -20 | 20 | mA | Absolute instantaneous sum of all input injection currents | 292 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | 01110 = Time base is synchronized to SCCP8 01101 = Time base is synchronized to the INT4 Pin (Remappable) | 150 |
CAD (KiCad official)
- Symbol:
PIC32MM0128GPM064-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mm0128gpm064-i-pt-etched.step/pic32mm0128gpm064-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mm0128gpm064-i-pt.step/pic32mm0128gpm064-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (356 pp, sha256
e0e3b208b87a54d9, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).