component
ADS7822UC
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS7822UC
Texas Instruments · Analog To Digital Converters (ADC) · SOIC-8
ADS7822UC from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | Reference input; the reference voltage can be set to any level from 50 mV up to VCC. |
| 2 | +In | input | Noninverting analog input; the absolute input range is -0.2 V to VCC + 0.2 V relative to GND. |
| 3 | -In | input | Inverting analog input; connect to ground or to a remote ground sense point, with an absolute input range of -0.2 V to +1.0 V relative to GND. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | CS/SHDN | input | Chip select when low; shutdown mode when high. |
| 6 | DOUT | output | Serial output data word of 12 bits, valid on the falling edge of DCLOCK; the output is enabled by the second clock pulse after CS falls, followed by one null bit. |
| 7 | DCLOCK | input | Data clock that synchronizes the serial data transfer and determines the conversion speed. |
| 8 | +VCC | power_in | Power supply; specified at 2.7 V to 3.6 V and 4.75 V to 5.25 V, with an absolute maximum of +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADS7822UC - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ads7822uc-etched.step/ads7822uc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads7822uc.step/ads7822uc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
889c901a1116a5b2, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).