component
TSC2010HYDT
Public Made by Adomby adom
STMicroelectronics Current Sense Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSC2010HYDT
STMicroelectronics · Current Sense Amplifiers · SOIC-8
TSC2010HYDT from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN - | input | Negative input of the current sense amplifier, which operates over the common-mode range of -20 to +70 V with absolute maximum input voltages of -25 to 76 V. |
| 2 | GND | power_in | Ground reference pin; all voltages in the absolute maximum ratings are referenced to the network ground terminal (except the differential input voltage). |
| 3 | VREF2 | input | Reference voltage 2 pin for output offset adjustment, with an adjustment range of 0 to Vcc and a voltage limit of Gnd - 0.3 V to Vcc + 0.3 V. |
| 4 | SHDN | input | Shutdown pin that places the device in shutdown mode, where the datasheet states a quiescent current of 20 µA; the logic levels and polarity are not given in the pages provided. |
| 5 | OUT | output | Amplifier output, whose voltage must stay within Gnd - 0.3 V to Vcc + 0.3 V according to the absolute maximum ratings. |
| 6 | VCC | power_in | Supply voltage pin, specified for operation from 2.7 V to 5.5 V, with an absolute maximum range of -0.3 V to 7 V. |
| 7 | VREF1 | input | Reference voltage 1 pin for output offset adjustment, with an adjustment range of 0 to Vcc and a voltage limit of Gnd - 0.3 V to Vcc + 0.3 V. |
| 8 | IN + | input | Positive input of the current sense amplifier, which operates over the common-mode range of -20 to +70 V; input current to any pin must be limited to 5 mA, with a serial resistor recommended when the input goes beyond the supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 7 | V | 4 | ||
| Common mode voltage on input pins | VICM | -25 | 76 | V | 4 | ||
| Differential voltage between input pins (In+, In-) | VDIF | 7 | V | 4 | |||
| Voltage present on pins REF1, REF2, OUT | VREF1 VREF2 VOUT | -0.3 | V | Max printed as Vcc + 0.3 V | 4 | ||
| Input current to any pins | IIN | 5 | mA | 4 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 4 | ||
| Junction temperature | TJ | 160 | °C | 4 | |||
| Supply voltage | Vcc | 2.7 | 5.5 | V | 4 | ||
| Common mode voltage on input pins | Vicm | -20 | 70 | V | 4 | ||
| Output offset adjustment range | Vref | 0 | V | Max printed as Vcc | 4 | ||
| Operating free-air temperature range | T | -40 | 150 | °C | 4 | ||
| Current consumption | Icc | 1.5 | 2.3 | mA | Vcc = 2.7 V; Vicm = -20 to 70 V | 5 | |
| Current consumption with shutdown active | Icc | 20 | 50 | µA | Vcc = 2.7 V; Vicm = -20 to 70 V | 5 | |
| Offset voltage (RTI) | /Vos/ | 200 | µV | Vcc = 2.7 V; Vicm = 1 V | 5 | ||
| Offset voltage (RTI) | /Vos/ | 825 | µV | Vcc = 2.7 V; Vicm = 1 V; Tmin < T < Tmax | 5 | ||
| Offset voltage (RTI) | /Vos/ | 500 | µV | Vcc = 2.7 V; Vicm = 12 V | 5 | ||
| Offset voltage (RTI) | /Vos/ | 1300 | µV | Vcc = 2.7 V; Vicm = 12 V; Tmin < T < Tmax | 5 | ||
| Offset drift vs. temperature | /ΔVos/ΔT/ | 5 | µV/°C | Vcc = 2.7 V; Vicm = 1 V, Tmin < T < Tmax | 5 | ||
| Offset drift vs. temperature | /ΔVos/ΔT/ | 8 | µV/°C | Vcc = 2.7 V; Vicm = 12 V, Tmin < T < Tmax | 5 | ||
| Common mode rejection | CMR | 90 | 115 | dB | Vcc = 2.7 V; Vicm = -20 to 70 V, DC mode | 5 | |
| Common mode rejection | CMR | 80 | dB | Vcc = 2.7 V; Vicm = -20 to 70 V, DC mode, Tmin < T < Tmax | 5 | ||
| Input bias current | Iib+ | -400 | 350 | 600 | µA | Vcc = 2.7 V; Vicm = 12 V; Tmin < T < Tmax, Vicm = -20 to 70 V | 5 |
| Input bias current | Iib- | -150 | 100 | 350 | µA | Vcc = 2.7 V; Vicm = 12 V; Tmin < T < Tmax, Vicm = -20 to 70 V | 5 |
| Vsense operating range with Eg ≤ 0.3% (TSC2010H) | /Vsense/ | 123.6 | mV | Vcc = 2.7 V; Eg ≤ 0.3% | 5 | ||
| Gain error vs. temperature | Eg | 0.3 | % | Vcc = 2.7 V; ΔVout = 100 mV to (Vcc - 100 mV) | 5 | ||
| Drop voltage output high | Vcc - Voh | 8 | 15 | mV | Vcc = 2.7 V; Isource = 0.2 mA | 5 | |
| Drop voltage output high | Vcc - Voh | 20 | mV | Vcc = 2.7 V; Isource = 0.2 mA; Tmin < T < Tmax | 5 | ||
| Output voltage low | Vol | 12 | 20 | mV | Vcc = 2.7 V; Isink = 0.2 mA | 6 | |
| Output voltage low | Vol | 30 | mV | Vcc = 2.7 V; Isink = 0.2 mA; Tmin < T < Tmax | 6 | ||
| Output current, sink mode | Iout | 12 | 20 | 25 | mA | Vcc = 2.7 V; Sink mode | 6 |
| Output current, sink mode | Iout | 8 | 30 | mA | Vcc = 2.7 V; Sink mode; Tmin < T < Tmax | 6 | |
| Output current, source mode | Iout | 6 | 10 | 14 | mA | Vcc = 2.7 V; Source mode | 6 |
| Output current, source mode | Iout | 4 | 17 | mA | Vcc = 2.7 V; Source mode; Tmin < T < Tmax | 6 | |
| Load regulation | Reg | 0.3 | 1.5 | mV/mA | Vcc = 2.7 V; Iout = -10 to +4 mA | 6 | |
| Current consumption | Icc | 1.6 | 2.4 | mA | Vcc = 5 V; Vicm = -20 to 70 V | 8 | |
| Current consumption with shutdown active | Icc | 20 | 50 | µA | Vcc = 5 V; Vicm = -20 to 70 V | 8 | |
| Supply voltage rejection | SVR | 80 | 100 | dB | Vcc = 2.7 to 5.5 V | 8 | |
| Offset voltage (RTI) | /Vos/ | 200 | µV | Vcc = 5 V; Vicm = 1 V | 8 | ||
| Offset voltage (RTI) | /Vos/ | 825 | µV | Vcc = 5 V; Vicm = 1 V; Tmin < T < Tmax | 8 | ||
| Offset voltage (RTI) | /Vos/ | 500 | µV | Vcc = 5 V; Vicm = 12 V | 8 | ||
| Offset voltage (RTI) | /Vos/ | 1300 | µV | Vcc = 5 V; Vicm = 12 V; Tmin < T < Tmax | 8 | ||
| Offset drift vs. temperature | /ΔVos/ΔT/ | 5 | µV/°C | Vcc = 5 V; Vicm = 1 V, Tmin < T < Tmax | 8 | ||
| Offset drift vs. temperature | /ΔVos/ΔT/ | 8 | µV/°C | Vcc = 5 V; Vicm = 12 V, Tmin < T < Tmax | 8 | ||
| Common mode rejection | CMR | 90 | 120 | dB | Vcc = 5 V; Vicm = -20 to 70 V, DC mode | 8 | |
| Input bias current | Iib+ | -400 | 350 | 600 | µA | Vcc = 5 V; Vicm = 12 V; Tmin < T < Tmax, Vicm = -20 to 70 V | 8 |
| Input bias current | Iib- | -150 | 100 | 350 | µA | Vcc = 5 V; Vicm = 12 V; Tmin < T < Tmax, Vicm = -20 to 70 V | 8 |
| Vsense operating range with Eg ≤ 0.3% (TSC2010H) | /Vsense/ | 238.3 | mV | Vcc = 5 V; Eg ≤ 0.3% | 8 | ||
| Gain error vs. temperature | Eg | 0.3 | % | Vcc = 5 V; ΔVout = 100 mV to (Vcc - 100 mV) | 8 | ||
| Drop voltage output high | Vcc - Voh | 15 | 30 | mV | Vcc = 5 V; Isource = 0.2 mA | 8 | |
| Drop voltage output high | Vcc - Voh | 35 | mV | Vcc = 5 V; Isource = 0.2 mA; Tmin < T < Tmax | 8 | ||
| Output voltage low | Vol | 26 | 40 | mV | Vcc = 5 V; Isink = 0.2 mA | 9 | |
| Output voltage low | Vol | 50 | mV | Vcc = 5 V; Isink = 0.2 mA; Tmin < T < Tmax | 9 | ||
| Output current, sink mode | Iout | 25 | 36 | 50 | mA | Vcc = 5 V; Sink mode | 9 |
| Output current, sink mode | Iout | 15 | 60 | mA | Vcc = 5 V; Sink mode; Tmin < T < Tmax | 9 | |
| Output current, source mode | Iout | 12 | 25 | 45 | mA | Vcc = 5 V; Source mode | 9 |
| Output current, source mode | Iout | 8 | 55 | mA | Vcc = 5 V; Source mode; Tmin < T < Tmax | 9 | |
| Load regulation | Reg | 0.3 | 1.5 | mV/mA | Vcc = 5 V; Iout = -10 to +10 mA | 9 | |
| Thermal resistance junction to ambient (SO8) | RTHJA | 125 | °C/W | SO8; Rth are typical values | 4 |
CAD (KiCad official)
- Symbol:
TSC2010HYDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tsc2010hydt-etched.step/tsc2010hydt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsc2010hydt.step/tsc2010hydt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (50 pp, sha256
855b0563a260e9fd, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).