component
F2800156QPNQ1
Public Made by Adomby adom
Texas Instruments , LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownF2800156QPNQ1
Texas Instruments · IC · LQFP-80(12x12)
F2800156QPNQ1 from Texas Instruments, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO30 | bidirectional | General-purpose input/output 30 with digital mux functions (MCAN_RX, LINA_TX, OUTPUTXBAR7 and others per Table 5-3). |
| 2 | GPIO31 | bidirectional | General-purpose input/output 31 with digital mux functions (MCAN_TX, OUTPUTXBAR8 and others per Table 5-3). |
| 3 | GPIO29 | bidirectional | General-purpose input/output 29 with digital mux functions (e.g. SCIA_TX, OUTPUTXBAR6, SPIA_CLK, I2CB_SCL options per Table 5-3). |
| 4 | A16/C16,GPIO28 | bidirectional | ADC-A input 16 / ADC-C input 16 analog pin that is also GPIO28 (AGPIO) with full digital input and output. |
| 5 | XRSn | bidirectional | Device reset pin with always-active internal pullup; device boot starts only after XRSn is released by all internal and external sources. |
| 6 | GPIO46 | bidirectional | General-purpose input/output 46 with digital mux functions (LINA_TX, MCAN_TX, PMBUSA_SDA, SYNCOUT). |
| 7 | VDDIO | power_in | 3.3-V digital I/O power pin; recommended 0.1 uF decoupling per pin. |
| 8 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 9 | VSS | power_in | Digital ground; all VSS pins must be connected to board ground. |
| 10 | A6,GPIO228 | bidirectional | ADC-A input 6 analog pin that is also GPIO228 (AGPIO) with full digital input and output. |
| 11 | C6,GPIO226 | bidirectional | ADC-C input 6 analog pin that is also GPIO226 (AGPIO) with full digital input and output. |
| 12 | A3/C5,GPIO242 | bidirectional | ADC-A input 3 / ADC-C input 5 analog pin with CMPSS-3 inputs, also GPIO242 (AGPIO). |
| 13 | A2/C9,GPIO224 | bidirectional | ADC-A input 2 / ADC-C input 9 analog pin with CMPSS-1 inputs, also GPIO224 (AGPIO). |
| 14 | A15/C7 | input | ADC-A input 15 / ADC-C input 7 analog input, also digital input AIO233 (CMPSS-1 inputs). |
| 15 | C4/A14 | input | ADC-C input 4 / ADC-A input 14 analog input, also digital input AIO239 (CMPSS-3 inputs). |
| 16 | A11/C0 | input | ADC-A input 11 / ADC-C input 0 analog input, also digital input AIO237 (CMPSS-1 inputs). |
| 17 | A5/C2 | input | ADC-A input 5 / ADC-C input 2 analog input, also digital input AIO244 (CMPSS-3 inputs). |
| 18 | A1 | input | ADC-A input 1 with CMPSS-1 comparator inputs, also digital input AIO232. |
| 19 | A0/C15/CMP1_DACL | input | ADC-A input 0 / ADC-C input 15 / CMPSS-1 low DAC output, also digital input AIO231. |
| 20 | VREFHI | passive | ADC high reference; tie to VDDA if the ADC is not used. |
| 21 | VREFLO | passive | ADC low reference; tie to VSSA if unused. |
| 22 | A12/C1 | input | ADC-A input 12 / ADC-C input 1 analog input, also digital input AIO238 (CMPSS-2/4 inputs). |
| 23 | A7/C3 | input | ADC-A input 7 / ADC-C input 3 analog input, also digital input AIO245 (CMPSS-4 inputs). |
| 24 | A8/C11 | input | ADC-A input 8 / ADC-C input 11 analog input, also digital input AIO241 (CMPSS-2/4 inputs). |
| 25 | VSSA | power_in | Analog ground; tie to VSS if no separate analog ground is used. |
| 26 | VDDA | power_in | 3.3-V analog power pin with minimum 2.2-uF decoupling capacitor; tie to VDDIO if no dedicated analog supply. |
| 27 | A4/C14 | input | ADC-A input 4 / ADC-C input 14 analog input with CMPSS-2/4 inputs, also digital input AIO225. |
| 28 | C8/A9,GPIO227 | bidirectional | ADC-C input 8 / ADC-A input 9 analog pin that is also GPIO227 (AGPIO). |
| 29 | A10/C10,GPIO230 | bidirectional | ADC-A input 10 / ADC-C input 10 analog pin that is also GPIO230 (AGPIO). |
| 30 | VSS | power_in | Digital ground; all VSS pins must be connected to board ground. |
| 31 | GPIO48 | bidirectional | General-purpose input/output 48 with digital mux functions (OUTPUTXBAR3, CANA_TX, MCAN_TX, SCIA_TX, PMBUSA_SDA). |
| 32 | GPIO49 | bidirectional | General-purpose input/output 49 with digital mux functions (OUTPUTXBAR4, CANA_RX, MCAN_RX, SCIA_RX, LINA_RX). |
| 33 | A17/C17,GPIO20 | bidirectional | ADC-A input 17 / ADC-C input 17 analog pin that is also GPIO20 (AGPIO) with eQEP1_A, CANA_TX, SPIA_SIMO and other mux functions. |
| 34 | A18/C18,GPIO21 | bidirectional | ADC-A input 18 / ADC-C input 18 analog pin that is also GPIO21 (AGPIO) with eQEP1_B, CANA_RX, SPIA_SOMI and other mux functions. |
| 35 | A19/C19,GPIO13 | bidirectional | ADC-A input 19 / ADC-C input 19 analog pin that is also GPIO13 (AGPIO) with EPWM7_B, MCAN_TX and other mux functions. |
| 36 | A20/C20,GPIO12 | bidirectional | ADC-A input 20 / ADC-C input 20 analog pin that is also GPIO12 (AGPIO) with EPWM7_A, MCAN_RX and other mux functions. |
| 37 | GPIO11 | bidirectional | General-purpose input/output 11 with EPWM6_B, CANA_RX, OUTPUTXBAR7, SCIB_RX, SPIA_STE and other mux functions. |
| 38 | GPIO33 | bidirectional | General-purpose input/output 33 with digital mux functions per Table 5-3. |
| 39 | GPIO16 | bidirectional | General-purpose input/output 16 with SPIA_SIMO, OUTPUTXBAR7, EPWM5_A, SCIA_TX, XCLKOUT and other mux functions. |
| 40 | GPIO17 | bidirectional | General-purpose input/output 17 with SPIA_SOMI, OUTPUTXBAR8, EPWM5_B, SCIA_RX, CANA_TX and other mux functions. |
| 41 | GPIO24 | bidirectional | General-purpose input/output 24 with OUTPUTXBAR1, EQEP2_A, SPIA_STE, EPWM4_A, ERRORSTS (needs external pulldown) and other mux functions. |
| 42 | GPIO25 | bidirectional | General-purpose input/output 25 with OUTPUTXBAR2, EQEP2_B, EQEP1_A, PMBUSA_SDA, SCIA_RX mux functions. |
| 43 | GPIO26 | bidirectional | General-purpose input/output 26 with OUTPUTXBAR3, EQEP2_INDEX, PMBUSA_CTL, I2CA_SDA mux functions. |
| 44 | GPIO27 | bidirectional | General-purpose input/output 27 with OUTPUTXBAR4, EQEP2_STROBE, PMBUSA_ALERT, I2CA_SCL mux functions. |
| 45 | TCK | input | JTAG test clock input with always-active internal pullup. |
| 46 | GPIO37/TDO | bidirectional | GPIO37 with JTAG TDO as default mux; tri-stated when no JTAG activity, so enable internal pullup or add external pullup. |
| 47 | TMS | input | JTAG test mode select input with always-active internal pullup. |
| 48 | GPIO35/TDI | bidirectional | GPIO35 with JTAG TDI as default mux; internal pullup disabled by default, enable it or add external pullup to avoid a floating input. |
| 49 | GPIO32 | bidirectional | General-purpose input/output 32 with digital mux functions per Table 5-3. |
| 50 | GPIO18,X2 | bidirectional | GPIO18 or crystal oscillator output X2 (also SPIA_CLK, CANA_RX, I2CA_SCL, XCLKOUT mux functions). |
| 51 | GPIO19,X1 | bidirectional | GPIO19 or crystal oscillator input X1 / single-ended 3.3-V clock input (also ExtR external resistor option). |
| 52 | VDDIO | power_in | 3.3-V digital I/O power pin; recommended 0.1 uF decoupling per pin. |
| 53 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 54 | GPIO43 | bidirectional | General-purpose input/output 43 with OUTPUTXBAR6, PMBUSA_ALERT, I2CA_SCL, SCIC_TX, EQEP1_INDEX mux functions. |
| 55 | VSS | power_in | Digital ground; all VSS pins must be connected to board ground. |
| 56 | VREGENZ | input | Internal VREG enable with internal pulldown; tie low to VSS to enable internal VREG, tie high to VDDIO to use an external supply. |
| 57 | GPIO42 | bidirectional | General-purpose input/output 42 with LINA_RX, OUTPUTXBAR5, PMBUSA_CTL, I2CA_SDA, SCIC_RX, EQEP1_STROBE mux functions; near PMM so avoid negative noise. |
| 58 | GPIO8 | bidirectional | General-purpose input/output 8 with EPWM5_A, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL mux functions; near PMM so avoid negative noise. |
| 59 | GPIO4 | bidirectional | General-purpose input/output 4; near PMM so avoid voltages below VSS - 0.3 V. |
| 60 | GPIO3 | bidirectional | General-purpose input/output 3; near PMM so avoid voltages below VSS - 0.3 V. |
| 61 | GPIO2 | bidirectional | General-purpose input/output 2; near PMM so avoid voltages below VSS - 0.3 V. |
| 62 | GPIO1 | bidirectional | General-purpose input/output 1; near PMM so avoid voltages below VSS - 0.3 V. |
| 63 | GPIO0 | bidirectional | General-purpose input/output 0; near PMM so avoid voltages below VSS - 0.3 V. |
| 64 | GPIO40 | bidirectional | General-purpose input/output 40 with EPWM2_B, PMBUSA_SDA, SCIB_TX, EQEP1_A mux functions. |
| 65 | GPIO23 | bidirectional | General-purpose input/output 23 with EQEP1_INDEX, SCIB_RX, LINA_RX, EPWM4_B mux functions. |
| 66 | GPIO41 | bidirectional | General-purpose input/output 41 with EPWM7_A, EPWM2_A, PMBUSA_SCL, SCIB_RX, EQEP1_B mux functions. |
| 67 | GPIO22 | bidirectional | General-purpose input/output 22 with EQEP1_STROBE, SCIB_TX, LINA_TX, EPWM4_A mux functions. |
| 68 | GPIO7 | bidirectional | General-purpose input/output 7 with digital mux functions per Table 5-3. |
| 69 | GPIO44 | bidirectional | General-purpose input/output 44 with OUTPUTXBAR7, EQEP1_A, PMBUSA_SDA, PMBUSA_CTL mux functions. |
| 70 | VSS | power_in | Digital ground; all VSS pins must be connected to board ground. |
| 71 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 72 | VDDIO | power_in | 3.3-V digital I/O power pin; recommended 0.1 uF decoupling per pin. |
| 73 | GPIO45 | bidirectional | General-purpose input/output 45 with OUTPUTXBAR8, PMBUSA_ALERT mux functions. |
| 74 | GPIO5 | bidirectional | General-purpose input/output 5 with digital mux functions per Table 5-3. |
| 75 | GPIO9 | bidirectional | General-purpose input/output 9 with EPWM5_B, SCIB_TX, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK, I2CB_SCL mux functions. |
| 76 | GPIO10 | bidirectional | General-purpose input/output 10 with EPWM6_A, ADCSOCBO, EQEP1_A, SCIB_TX, SPIA_SOMI, I2CA_SDA mux functions. |
| 77 | GPIO34 | bidirectional | General-purpose input/output 34 with digital mux functions per Table 5-3. |
| 78 | GPIO15 | bidirectional | General-purpose input/output 15 with SCIB_RX, I2CB_SCL, OUTPUTXBAR4, PMBUSA_SCL, EQEP2_B, EPWM3_B mux functions. |
| 79 | GPIO14 | bidirectional | General-purpose input/output 14 with SCIB_TX, I2CB_SDA, OUTPUTXBAR3, PMBUSA_SDA, EQEP2_A, EPWM3_A mux functions. |
| 80 | GPIO6 | bidirectional | General-purpose input/output 6 with digital mux functions per Table 5-3 (also SYNCOUT). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-80(12x12) |
| Category | |
| Pins | 80 |
CAD (KiCad official)
- Symbol:
F2800156QPNQ1 - Footprint:
Package_QFP:LQFP-80_12x12mm_P0.5mm - 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
f2800156qpnq1-etched.step/f2800156qpnq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f2800156qpnq1.step/f2800156qpnq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (252 pp, sha256
e5e9c14e326ac962, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).