3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR-78E5.0-1.0
YLPTEC · DC-DC Power Modules · SIP, 11.6x7.5mm
R-78E5.0-1.0 from YLPTEC, in a SIP, 11.6x7.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +Vin | power_in | Positive DC input supply; 8-28 VDC input range for R-78E5.0-1.0. |
| 2 | GND | power_in | Common ground for input and output. |
| 3 | +Vout | power_out | Regulated 5.0 V output, up to 1.0 A, with ±3.0% typical and ±5.0% maximum output accuracy. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YLPTEC |
| Package | SIP, 11.6x7.5mm |
| Category | Power Modules |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | Vin | 8 | 28 | VDC | 1 | ||
| Output Voltage | Vout | 5 | VDC | Selection guide | 1 | ||
| Output Current | Iout | 1 | A | Selection guide | 1 | ||
| Efficiency @ min. Vin | 93 | % | full load, +25°C ambient | 1 | |||
| Efficiency @ max. Vin | 85 | % | full load, +25°C ambient | 1 | |||
| Maximum Capacitive Load | 220 | µF | nominal input and full resistive load | 1 | |||
| Input Current | 1000 | mA | min. Vin | 1 | |||
| Quiescent Current | 1.5 | mA | 1 | ||||
| Internal Operating Frequency | 330 | kHz | 3.3 & 5Vout | 1 | |||
| Output Ripple and Noise | 120 | mVp-p | 20MHz BW, 100nF MLCC across output | 1 | |||
| Output Accuracy | -5 | 3 | 5 | % | ±3.0% typ. / ±5.0% max. | 2 | |
| Line Regulation | -1 | 1 | % | low line to high line, full load | 2 | ||
| Load Regulation | -1.5 | 1.5 | % | typ Vin. and 10% to 100% load | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | natural convection and with derating (see graph) | 3 | ||
| Humidity | 95 | %RH | non-condensing | 3 | |||
| Storage Temperature Range | -55 | 125 | °C | 4 |
CAD (Adom-generated)
- Symbol:
R-78E5.0-1.0 - Footprint:
Adom_Gen:YLPTEC_R-78E5.0_51711c - 3D model: generated to fit the land (STEP)
- 3D model files:
r-78e5-0-1-0-etched.step/r-78e5-0-1-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r-78e5-0-1-0.step/r-78e5-0-1-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YLPTEC datasheet (4 pp, sha256
be80e68802d70d38, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.