component

AD8092ARMZ

Public Made by Adom

by adom

Analog Devices Operational Amplifier, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiersad8092armzfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8092ARMZ

Analog Devices · Operational Amplifier · MSOP-8

AD8092ARMZ from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1, which swings to within 25 mV of either rail and is specified to deliver 45 mA with VOUT = 0.5 V to 4.5 V.
2 -IN1 input Inverting input of amplifier 1, with a common-mode input voltage range of −0.2 V to +4 V on a 5 V supply.
3 +IN1 input Noninverting input of amplifier 1, whose input range extends 200 mV below the negative rail and to within 1 V of the positive rail.
4 -VS power_in Negative supply pin; the operating range is 3 V to 12 V total, with an absolute maximum supply voltage of 12.6 V.
5 +IN2 input Noninverting input of amplifier 2; the datasheet gives an input capacitance of 1.4 pF and requires ground and power planes to be kept at least 0.05 mm from input pins.
6 -IN2 input Inverting input of amplifier 2; input and output traces should not be run parallel to limit capacitive coupling and positive feedback.
7 OUT2 output Output of amplifier 2, which swings to within 25 mV of either rail and can drive a 50 pF capacitive load at G = +1.
8 +VS power_in Positive supply pin; the operating range is 3 V to 12 V, and supply pins should be bypassed with stable low-impedance capacitors.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
-3 dB Small Signal Bandwidth 70 110 MHz VS = 5 V, RL = 2 kΩ to 2.5 V; G = +1, VO = 0.2 V p-p 3
Slew Rate 100 145 V/μs VS = 5 V, RL = 2 kΩ to 2.5 V; G = -1, VO = 2 V step 3
Input Offset Voltage 1.7 10 mV VS = 5 V, RL = 2 kΩ to 2.5 V 3
Input Offset Voltage (TMIN to TMAX) 25 mV VS = 5 V, RL = 2 kΩ to 2.5 V; TMIN to TMAX 3
Input Bias Current 1.4 2.5 μA VS = 5 V, RL = 2 kΩ to 2.5 V 3
Input Bias Current (TMIN to TMAX) 3.25 μA VS = 5 V, RL = 2 kΩ to 2.5 V; TMIN to TMAX 3
Input Offset Current 0.1 0.75 μA VS = 5 V, RL = 2 kΩ to 2.5 V 3
Open-Loop Gain 86 98 dB VS = 5 V, RL = 2 kΩ to 2.5 V; RL = 2 kΩ to 2.5 V 3
Open-Loop Gain 76 82 dB VS = 5 V, RL = 2 kΩ to 2.5 V; RL = 150 Ω to 2.5 V 3
Common-Mode Rejection Ratio 72 88 dB VS = 5 V; VCM = 0 V to 3.5 V 3
Output Voltage Swing 0.015 4.985 V VS = 5 V; RL = 10 kΩ to 2.5 V 3
Output Voltage Swing 0.1 4.9 V VS = 5 V; RL = 2 kΩ to 2.5 V (first printed range) 3
Output Voltage Swing 0.025 4.975 V VS = 5 V; RL = 2 kΩ to 2.5 V (second printed range) 3
Output Voltage Swing 0.3 4.625 V VS = 5 V; RL = 150 Ω to 2.5 V (first printed range) 3
Output Voltage Swing 0.2 4.8 V VS = 5 V; RL = 150 Ω to 2.5 V (second printed range) 3
Output Current 45 mA VS = 5 V; VOUT = 0.5 V to 4.5 V 3
Quiescent Current per Amplifier 4.4 5 mA VS = 5 V, RL = 2 kΩ to 2.5 V 3
Power Supply Rejection Ratio 70 80 dB VS = 5 V; ΔVS = ±1 V 3
-3 dB Small Signal Bandwidth 70 110 MHz VS = +3 V, RL = 2 kΩ to +1.5 V; G = +1, VO = 0.2 V p-p 4
Slew Rate 90 135 V/μs VS = +3 V, RL = 2 kΩ to +1.5 V; G = -1, VO = 2 V step 4
Input Offset Voltage 1.6 10 mV VS = +3 V, RL = 2 kΩ to +1.5 V 4
Input Offset Voltage (TMIN to TMAX) 25 mV VS = +3 V, RL = 2 kΩ to +1.5 V; TMIN to TMAX 4
Input Bias Current 1.3 2.6 μA VS = +3 V, RL = 2 kΩ to +1.5 V 4
Input Bias Current (TMIN to TMAX) 3.25 μA VS = +3 V, RL = 2 kΩ to +1.5 V; TMIN to TMAX 4
Input Offset Current 0.15 0.8 μA VS = +3 V, RL = 2 kΩ to +1.5 V 4
Open-Loop Gain 80 96 dB VS = +3 V, RL = 2 kΩ to +1.5 V; RL = 2 kΩ 4
Open-Loop Gain 74 82 dB VS = +3 V, RL = 2 kΩ to +1.5 V; RL = 150 Ω 4
Common-Mode Rejection Ratio 72 88 dB VS = +3 V; VCM = 0 V to 1.5 V 4
Output Voltage Swing 0.01 2.99 V VS = +3 V; RL = 10 kΩ to 1.5 V 4
Output Voltage Swing 0.075 2.9 V VS = +3 V; RL = 2 kΩ to 1.5 V (first printed range) 4
Output Voltage Swing 0.02 2.98 V VS = +3 V; RL = 2 kΩ to 1.5 V (second printed range) 4
Output Voltage Swing 0.2 2.75 V VS = +3 V; RL = 150 Ω to 1.5 V (first printed range) 4
Output Voltage Swing 0.125 2.875 V VS = +3 V; RL = 150 Ω to 1.5 V (second printed range) 4
Output Current 45 mA VS = +3 V; VOUT = 0.5 V to 2.5 V 4
Quiescent Current per Amplifier 4.2 4.8 mA VS = +3 V, RL = 2 kΩ to +1.5 V 4
Power Supply Rejection Ratio 68 80 dB VS = +3 V; ΔVS = +0.5 V 4
-3 dB Small Signal Bandwidth 70 110 MHz VS = ±5 V, RL = 2 kΩ to ground; G = +1, VO = 0.2 V p-p 5
Slew Rate 105 170 V/μs VS = ±5 V, RL = 2 kΩ to ground; G = -1, VO = 2 V step 5
Input Offset Voltage 1.8 11 mV VS = ±5 V, RL = 2 kΩ to ground 5
Input Offset Voltage (TMIN to TMAX) 27 mV VS = ±5 V, RL = 2 kΩ to ground; TMIN to TMAX 5
Input Bias Current 1.4 2.6 μA VS = ±5 V, RL = 2 kΩ to ground 5
Input Bias Current (TMIN to TMAX) 3.5 μA VS = ±5 V, RL = 2 kΩ to ground; TMIN to TMAX 5
Input Offset Current 0.1 0.75 μA VS = ±5 V, RL = 2 kΩ to ground 5
Open-Loop Gain 88 96 dB VS = ±5 V, RL = 2 kΩ to ground; RL = 2 kΩ 5
Open-Loop Gain 78 82 dB VS = ±5 V, RL = 2 kΩ to ground; RL = 150 Ω 5
Common-Mode Rejection Ratio 72 88 dB VS = ±5 V; VCM = -5 V to +3.5 V 5
Output Voltage Swing -4.98 4.98 V VS = ±5 V; RL = 10 kΩ 5
Output Voltage Swing -4.85 4.85 V VS = ±5 V; RL = 2 kΩ (first printed range) 5
Output Voltage Swing -4.97 4.97 V VS = ±5 V; RL = 2 kΩ (second printed range) 5
Output Voltage Swing -4.45 4.3 V VS = ±5 V; RL = 150 Ω (first printed range) 5
Output Voltage Swing -4.6 4.6 V VS = ±5 V; RL = 150 Ω (second printed range) 5
Output Current 45 mA VS = ±5 V; VOUT = -4.5 V to +4.5 V 5
Quiescent Current per Amplifier 4.8 5.5 mA VS = ±5 V, RL = 2 kΩ to ground 5
Power Supply Rejection Ratio 68 80 dB VS = ±5 V; ΔVS = ±1 V 5
Supply Voltage 12.6 V 6
Differential Input Voltage -2.5 2.5 V 6
Storage Temperature Range -65 125 °C 6
Operating Temperature Range -40 85 °C 6
Operating Range (supply voltage) 3 12 V Single or dual supply 3
Junction-to-Ambient Thermal Resistance (MSOP-8) θJA 150 °C/W MSOP-8 on JEDEC standard four-layer board 7

CAD (KiCad official)

  • Symbol: AD8092ARMZ
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ad8092armz-etched.step / ad8092armz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8092armz.step / ad8092armz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 f444736e25f23b33, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF