Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74ACT374DW

Texas Instruments · Flip Flops · SOIC-20-300mil

SN74ACT374DW from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable; when OE is high the eight outputs go to the high-impedance state, and OE must be tied to VCC through a pullup resistor for a specified high-impedance state during power up or power down.
2 1Q output Output 1 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is set to high or low by CLK, or placed in high-impedance state by OE.
3 1D input Data input 1, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
4 2D input Data input 2, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
5 2Q output Output 2 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
6 3Q output Output 3 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
7 3D input Data input 3, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
8 4D input Data input 4, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
9 4Q output Output 4 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
10 GND power_in Ground pin.
11 CLK input Clock input; the Q outputs take the logic levels set up at D on its positive transition.
12 5Q output Output 5 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
13 5D input Data input 5, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
14 6D input Data input 6, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
15 6Q output Output 6 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
16 7Q output Output 7 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
17 7D input Data input 7, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
18 8D input Data input 8, which is loaded into the flip-flop on the positive transition of CLK; unused inputs must be tied to VCC or GND.
19 8Q output Output 8 of the flip-flop, which can drive highly capacitive or relatively low-impedance loads and is placed in high-impedance state by OE.
20 VCC power_in Supply voltage pin; the device operates from 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5.5 V 4
High-level input voltage VIH 2 V 4
Low-level input voltage VIL 0.8 V 4
Input voltage VI 0 5.5 V 4
Output voltage VO 0 5.5 V 4
High-level output current IOH -24 mA 4
Low-level output current IOL 24 mA 4
Input transition rise or fall rate Δt/Δv 8 ns/V 4
Operating free-air temperature TA -40 85 °C SN74ACT374 4
Supply voltage range VCC -0.5 7 V 4
Input voltage range VI -0.5 V max VCC + 0.5 V 4
Output voltage range VO -0.5 V max VCC + 0.5 V 4
Input clamp current IIK -20 20 mA VI < 0 or VI > VCC 4
Output clamp current IOK -20 20 mA VO < 0 or VO > VCC 4
Continuous output current IO -50 50 mA VO = 0 to VCC 4
Continuous current through VCC or GND -200 200 mA 4
Storage temperature range Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 58 °C/W DW (SOIC) package, 20 pins 5
High-level output voltage VOH 4.4 4.49 V IOH = −50μA, VCC = 4.5 V 5
High-level output voltage VOH 5.4 5.49 V IOH = −50μA, VCC = 5.5 V 5
High-level output voltage VOH 3.76 3.86 V IOH = −24 mA, VCC = 4.5 V 5
High-level output voltage VOH 4.76 4.86 V IOH = −24 mA, VCC = 5.5 V 5
Low-level output voltage VOL 0.1 0.1 V IOL = 50μA, VCC = 4.5 V 5
Low-level output voltage VOL 0.36 0.44 V IOL = 24 mA, VCC = 4.5 V 5
Off-state output current IOZ -2.5 0.25 2.5 μA VO = VCC or GND, VCC = 5.5 V 5
Input current II -1 0.1 1 μA VI = VCC or GND, VCC = 5.5 V 5
Quiescent supply current ICC 4 40 μA VI = VCC or GND, IO = 0, VCC = 5.5 V 5
Increase in supply current per input ΔICC 0.6 1.5 mA One input at 3.4 V, other inputs at GND or VCC, VCC = 5.5 V 5
Input capacitance Ci 4.5 pF VI = VCC or GND, VCC = 5 V 5
Clock frequency fclock 90 MHz VCC = 5 V ± 0.5 V 6
Pulse duration, CLK high or low tw 5 ns VCC = 5 V ± 0.5 V 6
Setup time, data before CLK↑ tsu 5.5 ns VCC = 5 V ± 0.5 V 6
Hold time, data after CLK↑ th 1.5 ns VCC = 5 V ± 0.5 V 6
Maximum clock frequency fmax 90 160 MHz VCC = 5 V ± 0.5 V 6
Propagation delay CLK to Q (low to high) tPLH 2 8.5 11.5 ns CLK to Q, VCC = 5 V ± 0.5 V 6
Propagation delay CLK to Q (high to low) tPHL 1.5 8 11 ns CLK to Q, VCC = 5 V ± 0.5 V 6
Output enable time OE to Q (high) tPZH 1.5 8 10.5 ns OE to Q, VCC = 5 V ± 0.5 V 6
Output enable time OE to Q (low) tPZL 1.5 8 10.5 ns OE to Q, VCC = 5 V ± 0.5 V 6
Output disable time OE to Q (high) tPHZ 1 8.5 12.5 ns OE to Q, VCC = 5 V ± 0.5 V 6
Output disable time OE to Q (low) tPLZ 1 7 10 ns OE to Q, VCC = 5 V ± 0.5 V 6
Power dissipation capacitance Cpd 40 pF CL = 50 pF, f = 1 MHz, VCC = 5 V, TA = 25°C 6

CAD (KiCad official)

  • Symbol: SN74ACT374DW
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74act374dw-etched.step / sn74act374dw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74act374dw.step / sn74act374dw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 dac4ec2aad216035, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF