component
ACPL-P484-000E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SO-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownACPL-P484-000E
Broadcom AVAGO · Logic Output Optoisolators · SO-6
ACPL-P484-000E from Broadcom AVAGO, in a SO-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode input; drive with forward current IF(ON) of 4 mA to 7 mA for the ON state, with VF(OFF) at or below 0.8 V for the OFF state. |
| 2 | N.C. | unconnected | No connection pin on the ACPL-P484 stretched SO-6 package. |
| 3 | CATHODE | passive | LED cathode input; the LED turns ON with the anode at 4 mA to 7 mA forward current and OFF at 0.8 V or less. |
| 4 | GND | power_in | Output side ground, with a 0.1 μF bypass capacitor connected between this pin and VCC (pin 6). |
| 5 | VO | output | Totem pole output (no pull-up resistor needed) that goes high when the LED is on and low when it is off, with an absolute maximum average output current of 50 mA. |
| 6 | VCC | power_in | Output side supply voltage with a recommended range of 4.5 V to 30 V (0 V to 35 V absolute maximum), bypassed to GND (pin 4) with 0.1 μF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SO-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TS | -55 | 125 | °C | 6 | ||
| Operating Temperature | TA | -40 | 105 | °C | 6 | ||
| Average Input Current | IF(AVG) | 10 | mA | 6 | |||
| Peak Transient Input Current | IF(TRAN) | 1 | A | <1 μs pulse width, 300 pps | 6 | ||
| Peak Transient Input Current | IF(TRAN) | 40 | mA | <200 μs pulse width, <1% duty cycle | 6 | ||
| Reverse Input Voltage | VR | 5 | V | 6 | |||
| Average Output Current | IO | 50 | mA | 6 | |||
| Supply Voltage | VCC | 0 | 35 | V | 6 | ||
| Output Voltage | VO | -0.5 | 35 | V | 6 | ||
| Total Package Power Dissipation | PT | 210 | mW | 6 | |||
| Power Supply Voltage | VCC | 4.5 | 30 | V | Truth Table guaranteed: 4.5V to 30V | 6 | |
| Forward Input Current (ON) | IF(ON) | 4 | 7 | mA | 6 | ||
| Forward Input Voltage (OFF) | VF(OFF) | 0.8 | V | 6 | |||
| Operating Temperature | TA | -40 | 105 | °C | 6 | ||
| Logic Low Output Voltage | VOL | 0.3 | V | IOL = 3.5 mA | 6 | ||
| Logic Low Output Voltage | VOL | 0.5 | V | IOL = 6.5 mA | 6 | ||
| Logic Low Supply Current | ICCL | 1.5 | 3 | mA | VCC = 5.5V, VF = 0V, IO = 0 mA | 6 | |
| Logic Low Supply Current | ICCL | 1.7 | 3 | mA | VCC = 20V, VF = 0V, IO = 0 mA | 6 | |
| Logic High Supply Current | ICCH | 1.5 | 3 | mA | VCC = 5.5V, IF = 7 mA, IO = 0 mA | 6 | |
| Logic High Supply Current | ICCH | 1.7 | 3 | mA | VCC = 30V, IF = 7 mA, IO = 0 mA | 6 | |
| Threshold Input Current Low to High | IFLH | 0.8 | 2.2 | mA | 7 | ||
| Threshold Input Voltage High to Low | VFHL | 0.8 | V | IF = 4 mA | 7 | ||
| Logic Low Short Circuit Output Current | IOSL | 125 | 200 | mA | VO = VCC = 5.5V, VF = 0V | 7 | |
| Logic High Short Circuit Output Current | IOSH | -200 | -125 | mA | VCC = 5.5V, IF = 7 mA, VO = GND | 7 | |
| Input Forward Voltage | VF | 1.3 | 1.5 | 1.7 | V | TA = 25°C, IF = 4 mA | 7 |
| Input Forward Voltage | VF | 1.85 | V | IF = 4 mA | 7 | ||
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 μA | 7 | ||
| Propagation Delay Time to Logic Low Output Level | tPHL | 95 | 150 | ns | CL = 100 pF, IF(ON) = 4 mA, VF = 0V | 7 | |
| Propagation Delay Time to Logic Low Output Level | tPHL | 150 | ns | Loaded as per Figure 5 | 7 | ||
| Propagation Delay Time to Logic High Output Level | tPLH | 85 | 120 | ns | CL = 100 pF, VF = 0V, IF(ON) = 4 mA | 7 | |
| Propagation Delay Time to Logic High Output Level | tPLH | 120 | ns | Loaded as per Figure 5 | 7 | ||
| Pulse Width Distortion | PWD | 90 | ns | CL = 100 pF | 7 | ||
| Propagation Delay Difference Between Any Two Parts | PDD | -130 | 130 | ns | CL = 100 pF | 7 | |
| Logic High Common Mode Transient Immunity | /CMH/ | 30 | kV/μs | /VCM/ = 1000V, IF = 4.0 mA, VCC = 5V, TA = 25°C | 7 | ||
| Logic Low Common Mode Transient Immunity | /CML/ | 30 | kV/μs | /VCM/ = 1000V, VF = 0V, VCC = 5V, TA = 25°C | 7 | ||
| Input-Output Momentary Withstand Voltage | VISO | 3750 | VRMS | RH < 50%, t = 1 min., TA = 25°C | 8 | ||
| Maximum junction temperature | 125 | °C | 12 |
CAD (KiCad official)
- Symbol:
ACPL-P484-000E - Footprint:
Package_SO:SO-6_4.4x3.6mm_P1.27mm - 3D model: SO-6 (KiCad packages3D, STEP)
- 3D model files:
acpl-p484-000e-etched.step/acpl-p484-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acpl-p484-000e.step/acpl-p484-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (13 pp, sha256
b76b597daaab55ba, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).