component
TL034CN
Public Made by Adomby adom
Texas Instruments Pre-ordered Chips, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL034CN
Texas Instruments · Pre-ordered Chips · PDIP-14
TL034CN from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1. |
| 2 | 1IN− | input | Inverting input of amplifier 1. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1. |
| 4 | VCC+ | power_in | Positive supply voltage pin. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2. |
| 6 | 2IN− | input | Inverting input of amplifier 2. |
| 7 | 2OUT | output | Output of amplifier 2. |
| 8 | 3OUT | output | Output of amplifier 3. |
| 9 | 3IN− | input | Inverting input of amplifier 3. |
| 10 | 3IN+ | input | Non-inverting input of amplifier 3. |
| 11 | VCC− | power_in | Negative supply voltage pin. |
| 12 | 4IN+ | input | Non-inverting input of amplifier 4. |
| 13 | 4IN− | input | Inverting input of amplifier 4. |
| 14 | 4OUT | output | Output of amplifier 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-14 |
| Category | Interface ICs |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 0.91 | 6 | mV | VCC± = ±5 V; VO = 0, VIC = 0, RS = 50 Ω; TA = 25°C | 18 | |
| Input offset voltage | VIO | 0.79 | 4 | mV | VCC± = ±15 V; VO = 0, VIC = 0, RS = 50 Ω; TA = 25°C | 18 | |
| Input offset voltage full range | VIO | 8.2 | mV | VCC± = ±5 V; full range 0°C to 70°C | 18 | ||
| Input offset voltage full range | VIO | 6.2 | mV | VCC± = ±15 V; full range 0°C to 70°C | 18 | ||
| Input offset current | IIO | 1 | 100 | pA | VCC± = ±5 V; VO = 0, VIC = 0; TA = 25°C | 18 | |
| Input offset current | IIO | 9 | 200 | pA | VCC± = ±5 V; VO = 0, VIC = 0; See Figure 5; TA = 70°C | 18 | |
| Input offset current | IIO | 12 | 200 | pA | VCC± = ±15 V; VO = 0, VIC = 0; See Figure 5; TA = 70°C | 18 | |
| Input bias current | IIB | 2 | 200 | pA | VCC± = ±5 V; VO = 0, VIC = 0; TA = 25°C | 18 | |
| Input bias current | IIB | 50 | 400 | pA | VCC± = ±5 V; VO = 0, VIC = 0; See Figure 5; TA = 70°C | 18 | |
| Input bias current | IIB | 80 | 400 | pA | VCC± = ±15 V; VO = 0, VIC = 0; See Figure 5; TA = 70°C | 18 | |
| Common mode input voltage range full range | VICR | -1.5 | 4 | V | VCC± = ±5 V; full range 0°C to 70°C | 18 | |
| Common mode input voltage range full range | VICR | -11.5 | 14 | V | VCC± = ±15 V; full range 0°C to 70°C | 18 | |
| Maximum positive peak output voltage swing | VOM+ | 3 | 4.3 | V | VCC± = ±5 V; RL = 10 kΩ; TA = 25°C | 18 | |
| Maximum positive peak output voltage swing | VOM+ | 13 | 14 | V | VCC± = ±15 V; RL = 10 kΩ; TA = 25°C | 18 | |
| Maximum negative peak output voltage swing | VOM− | -3 | -4.2 | V | VCC± = ±5 V; RL = 10 kΩ; TA = 25°C | 18 | |
| Maximum negative peak output voltage swing | VOM− | -12.5 | -13.9 | V | VCC± = ±15 V; RL = 10 kΩ; TA = 25°C | 18 | |
| Large-signal differential voltage amplification | AVD | 4 | 12 | V/mV | VCC± = ±5 V; RL = 10 kΩ; VO = ±2.3 V; TA = 25°C | 18 | |
| Large-signal differential voltage amplification | AVD | 5 | 14.3 | V/mV | VCC± = ±15 V; RL = 10 kΩ; VO = ±10 V; TA = 25°C | 18 | |
| Common-mode rejection ratio | CMRR | 70 | 87 | dB | VCC± = ±5 V; VIC = VICRmin, VO = 0, RS = 50 Ω; TA = 25°C | 18 | |
| Common-mode rejection ratio | CMRR | 75 | 94 | dB | VCC± = ±15 V; VIC = VICRmin, VO = 0, RS = 50 Ω; TA = 25°C | 18 | |
| Supply-voltage rejection ratio | kSVR | 75 | 96 | dB | VCC± = ±5 V to ±15 V; VO = 0, RS = 50 Ω; TA = 25°C | 18 | |
| Total power dissipation (two amplifiers) | PD | 7.7 | 10 | mW | VCC± = ±5 V; VO = 0, No load; TA = 25°C | 19 | |
| Total power dissipation (two amplifiers) | PD | 26 | 34 | mW | VCC± = ±15 V; VO = 0, No load; TA = 25°C | 19 | |
| Supply current (four amplifiers) | ICC | 0.77 | 1 | mA | VCC± = ±5 V; VO = 0, No load; TA = 25°C | 19 | |
| Supply current (four amplifiers) | ICC | 0.87 | 1.12 | mA | VCC± = ±15 V; VO = 0, No load; TA = 25°C | 19 | |
| Positive slew rate at unity gain | SR+ | 1.5 | 2.9 | V/μs | VCC± = ±15 V; RL = 10 kΩ, CL = 100 pF; See Figure 1; TA = 25°C | 19 | |
| Positive slew rate at unity gain | SR+ | 1 | 2.6 | V/μs | VCC± = ±15 V; RL = 10 kΩ, CL = 100 pF; See Figure 1; TA = 0°C | 19 | |
| Negative slew rate at unity gain | SR− | 1.5 | 5.1 | V/μs | VCC± = ±15 V; RL = 10 kΩ, CL = 100 pF; See Figure 1; TA = 25°C | 19 | |
| Negative slew rate at unity gain | SR− | 1.5 | 5 | V/μs | VCC± = ±15 V; RL = 10 kΩ, CL = 100 pF; See Figure 1; TA = 0°C | 19 | |
| Supply voltage | VCC± | 5 | 15 | V | C suffix (TL034C) | 5 | |
| Common mode input voltage | VIC | -1.5 | 4 | V | VCC± = ±5 V; C suffix | 5 | |
| Common mode input voltage | VIC | -11.5 | 14 | V | VCC± = ±15 V; C suffix | 5 | |
| Operating free-air temperature | TA | 0 | 70 | °C | C suffix | 5 | |
| Supply voltage VCC+ | VCC+ | 18 | V | See Note 1 | 5 | ||
| Supply voltage VCC− | VCC− | -18 | V | See Note 1 | 5 | ||
| Differential input voltage | VID | -30 | 30 | V | See Note 2 | 5 | |
| Input voltage (any input) | VI | -15 | 15 | V | See Notes 1 and 3 | 5 | |
| Input current (each input) | II | -1 | 1 | mA | each input | 5 | |
| Output current (each output) | IO | -40 | 40 | mA | each output | 5 | |
| Total current into VCC+ | 160 | mA | 5 | ||||
| Total current out of VCC− | 160 | mA | 5 | ||||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Lead temperature (D, N, P, or PW package) | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 5 | |||
| Package thermal impedance (N package) | θJA | 80 | °C/W | N package; calculated per JESD 51-7 | 5 |
CAD (KiCad official)
- Symbol:
TL034CN - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
tl034cn-etched.step/tl034cn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl034cn.step/tl034cn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (68 pp, sha256
1bd4e879f663476a, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).