3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKL26Z128VFM4
NXP Semicon · NXP MCU · QFN-32-EP(5x5)
MKL26Z128VFM4 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | GPIO port E bit 0, disabled by default, with ALT functions SPI1_MISO, UART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA. |
| 2 | VSS | power_in | Digital ground supply pin. |
| 3 | USB0_DP | bidirectional | USB0 full-/low-speed data plus line of the on-chip USB transceiver. |
| 4 | USB0_DM | bidirectional | USB0 full-/low-speed data minus line of the on-chip USB transceiver. |
| 5 | VOUT33 | power_out | Output of the on-chip 5 V to 3.3 V USB voltage regulator. |
| 6 | VREGIN | power_in | Input to the on-chip 5 V to 3.3 V USB voltage regulator. |
| 7 | VDDA | power_in | Analog power supply pin. |
| 8 | VSSA | power_in | Analog ground pin. |
| 9 | PTE30 | bidirectional | GPIO port E bit 30 with analog default DAC0_OUT/ADC0_SE23/CMP0_IN4 and ALT3 TPM0_CH3, ALT4 TPM_CLKIN1. |
| 10 | PTA0 | bidirectional | GPIO port A bit 0, default SWD_CLK, with TSI0_CH1 (ALT0) and TPM0_CH5 (ALT3). |
| 11 | PTA1 | bidirectional | GPIO port A bit 1, disabled by default, with TSI0_CH2, UART0_RX and TPM2_CH0. |
| 12 | PTA2 | bidirectional | GPIO port A bit 2, disabled by default, with TSI0_CH3, UART0_TX and TPM2_CH1. |
| 13 | PTA3 | bidirectional | GPIO port A bit 3, default SWD_DIO, with TSI0_CH4, I2C1_SCL and TPM0_CH0. |
| 14 | PTA4 | bidirectional | GPIO port A bit 4, default NMI_b, with TSI0_CH5, I2C1_SDA and TPM0_CH1. |
| 15 | VDD | power_in | Digital power supply pin (device operating range 1.71 to 3.6 V). |
| 16 | VSS | power_in | Digital ground supply pin. |
| 17 | PTA18 | bidirectional | GPIO port A bit 18, default EXTAL0 crystal oscillator pin, with UART1_RX and TPM_CLKIN0. |
| 18 | PTA19 | bidirectional | GPIO port A bit 19, default XTAL0 crystal oscillator pin, with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1. |
| 19 | PTA20 | bidirectional | GPIO port A bit 20, default RESET_b external reset pin. |
| 20 | PTB0/LLWU_P5 | bidirectional | GPIO port B bit 0 and LLWU_P5 wakeup input, with ADC0_SE8/TSI0_CH0, I2C0_SCL and TPM1_CH0. |
| 21 | PTB1 | bidirectional | GPIO port B bit 1 with ADC0_SE9/TSI0_CH6, I2C0_SDA and TPM1_CH1. |
| 22 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | GPIO port C bit 1, LLWU_P6 wakeup input and RTC_CLKIN, with ADC0_SE15/TSI0_CH14, I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 23 | PTC2 | bidirectional | GPIO port C bit 2 with ADC0_SE11/TSI0_CH15, I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 24 | PTC3/LLWU_P7 | bidirectional | GPIO port C bit 3 and LLWU_P7 wakeup input, disabled by default, with UART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 25 | PTC4/LLWU_P8 | bidirectional | GPIO port C bit 4 and LLWU_P8 wakeup input, disabled by default, with SPI0_PCS0, UART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 26 | PTC5/LLWU_P9 | bidirectional | GPIO port C bit 5 and LLWU_P9 wakeup input, with SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 27 | PTC6/LLWU_P10 | bidirectional | GPIO port C bit 6 and LLWU_P10 wakeup input, default CMP0_IN0, with SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 28 | PTC7 | bidirectional | GPIO port C bit 7, default CMP0_IN1, with SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS and SPI0_MOSI. |
| 29 | PTD4/LLWU_P14 | bidirectional | GPIO port D bit 4 and LLWU_P14 wakeup input, disabled by default, with SPI1_PCS0, UART2_RX and TPM0_CH4. |
| 30 | PTD5 | bidirectional | GPIO port D bit 5 with ADC0_SE6b, SPI1_SCK, UART2_TX and TPM0_CH5. |
| 31 | PTD6/LLWU_P15 | bidirectional | GPIO port D bit 6 and LLWU_P15 wakeup input, with ADC0_SE7b, SPI1_MOSI, UART0_RX and SPI1_MISO. |
| 32 | PTD7 | bidirectional | GPIO port D bit 7, disabled by default, with SPI1_MISO, UART0_TX and SPI1_MOSI. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 4 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 4 | |||
| ESD human body model | VHBM | -2000 | 2000 | V | 4 | ||
| ESD charged-device model | VCDM | -500 | 500 | V | 4 | ||
| Latch-up current | ILAT | -100 | 100 | mA | ambient temperature of 105 °C | 4 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 5 | ||
| Digital supply current | IDD | 120 | mA | 5 | |||
| IO pin input voltage | VIO | -0.3 | 3.8 | V | VDD + 0.3 V max as printed | 5 | |
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | applies to all port pins | 5 | |
| Analog supply voltage | VDDA | -0.3 | 3.8 | V | VDD, 0.3 to VDD + 0.3 V as printed | 5 | |
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 5 | ||
| USB_DM input voltage | VUSB_DM | -0.3 | 3.63 | V | 5 | ||
| USB regulator input | VREGIN | -0.3 | 6 | V | 5 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 6 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 6 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 6 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 6 | ||
| Input high voltage | VIH | 0.7 | V | 2.7 V ≤ VDD ≤ 3.6 V; min 0.7 × VDD | 6 | ||
| Input high voltage | VIH | 0.75 | V | 1.7 V ≤ VDD ≤ 2.7 V; min 0.75 × VDD | 6 | ||
| Input low voltage | VIL | 0.35 | V | 2.7 V ≤ VDD ≤ 3.6 V; max 0.35 × VDD | 6 | ||
| Input low voltage | VIL | 0.3 | V | 1.7 V ≤ VDD ≤ 2.7 V; max 0.3 × VDD | 6 | ||
| Input hysteresis | VHYS | 0.06 | V | min 0.06 × VDD | 6 | ||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V | 6 | ||
| Contiguous pin DC injection current | IICcont | -25 | mA | Negative current injection | 6 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 6 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 6 | |
| Internal reference frequency (fast clock) factory trimmed | Δfdco_t | 3 | %fdco | over voltage and temperature, trimmed; ± 3 printed (typ +0.5/-0.7) | 21 | ||
| Total deviation of trimmed DCO frequency, 0-70 °C | Δfdco_t | 0.4 | 1.5 | %fdco | fixed voltage and temperature range of 0-70 °C; ± printed | 21 | |
| Frequency deviation of fast internal reference | Δfintf_ft | 3 | %fintf_ft | over temperature and voltage, factory trimmed at nominal VDD and 25 °C; ± 3 printed | 21 | ||
| Internal reference frequency (fast clock) user trimmed | fintf_t | 3 | 5 | MHz | user trimmed at nominal VDD and 25 °C | 21 | |
| FLL reference frequency range | ffll_ref | 31.25 | 39.0625 | kHz | 21 | ||
| DCO output frequency range, low range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00), 640 × ffll_ref | 21 |
| DCO output frequency range, mid range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01), 1280 × ffll_ref | 21 |
| FLL target frequency acquisition time | tfll_acquire | 1 | ms | 21 | |||
| PLL VCO operating frequency | fvco | 48 | 100 | MHz | 21 | ||
| PLL reference frequency range | fpll_ref | 2 | 4 | MHz | 21 | ||
| Lock entry frequency tolerance | Dlock | -1.49 | 2.98 | % | ± 1.49 min to ± 2.98 max as printed | 22 | |
| Lock exit frequency tolerance | Dunl | -4.47 | 5.97 | % | ± 4.47 min to ± 5.97 max as printed | 22 | |
| Oscillator supply voltage | VDD | 1.71 | 3.6 | V | 22 | ||
| Oscillator crystal frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 24 | |
| Oscillator crystal frequency, high-frequency low range | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 24 | |
| Oscillator crystal frequency, high-frequency high range | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 24 | |
| Input clock frequency (external clock mode) | fec_extal | 48 | MHz | 24 | |||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | 24 | |
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 25 | ||
| Sector Erase high-voltage time | thversscr | 13 | 113 | ms | 25 | ||
| Erase All high-voltage time | thversall | 52 | 452 | ms | 25 | ||
| Program Longword execution time | tpgm4 | 65 | 145 | μs | 25 | ||
| Erase Flash Sector execution time | tersscr | 14 | 114 | ms | 25 | ||
| Erase All Blocks execution time | tersall | 88 | 650 | ms | 25 | ||
| Average current adder during flash programming | IDD_PGM | 2.5 | 6 | mA | 25 | ||
| Average current adder during flash erase | IDD_ERS | 1.5 | 4 | mA | 25 | ||
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | years | 26 | ||
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | years | 26 | ||
| Cycling endurance | nnvmcycp | 10 | 50 | cycles | 10 K min, 50 K typ; -40 °C ≤ Tj ≤ 125 °C | 26 | |
| ADC supply voltage | VDDA | 1.71 | 3.6 | V | Absolute | 26 | |
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 28 | ||
| Total unadjusted error, 12-bit modes | TUE | 4 | 6.8 | LSB | 12-bit modes; ± printed | 28 | |
| DAC supply current low-power mode | IDDA_DACLP | 250 | μA | 34 | |||
| DAC supply current high-speed mode | IDDA_DACHP | 900 | μA | 34 | |||
| USB regulator input supply voltage | VREGIN | 2.7 | 5.5 | V | 37 | ||
| USB regulator output voltage, run mode | VReg33out | 3 | 3.3 | 3.6 | V | Input supply (VREGIN) > 3.6 V, Run mode | 37 |
CAD (KiCad official)
- Symbol:
MKL26Z128VFM4 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
mkl26z128vfm4-etched.step/mkl26z128vfm4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl26z128vfm4.step/mkl26z128vfm4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (61 pp, sha256
0b9079acb0fc3df6, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).