Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32G0B1VCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32G0B1VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB9 bidirectional 5V-tolerant Fm+ I/O (FT_f), default GPIO PB9 with alternate functions IR_OUT, UCPD2_FRSTX, TIM17_CH1, FDCAN1_TX, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, EVENTOUT, USART6_RX, TIM4_CH4.
2 PC10 bidirectional 5V-tolerant I/O (FT), default GPIO PC10 with alternate functions USART3_TX, USART4_TX, TIM1_CH3, SPI3_SCK.
3 PC11 bidirectional 5V-tolerant I/O (FT), default GPIO PC11 with alternate functions USART3_RX, USART4_RX, TIM1_CH4, SPI3_MISO.
4 PE4 bidirectional 5V-tolerant I/O (FT), default GPIO PE4 with alternate function TIM3_CH2.
5 PE5 bidirectional 5V-tolerant I/O (FT), default GPIO PE5 with alternate function TIM3_CH3.
6 PE6 bidirectional 5V-tolerant I/O (FT), default GPIO PE6 with alternate function TIM3_CH4 and additional functions TAMP_IN3, WKUP3.
7 PC12 bidirectional 5V-tolerant I/O (FT), default GPIO PC12 with alternate functions LPTIM1_IN1, UCPD1_FRSTX, TIM14_CH1, USART5_TX, SPI3_MOSI.
8 PC13 bidirectional 5V-tolerant I/O (FT) supplied through the power switch (limited to 3 mA sink, max 2 MHz/30 pF in output mode, not usable as a current source), default GPIO PC13 with alternate function TIM1_BKIN and additional functions TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2.
9 PC14-OSC32_IN bidirectional 5V-tolerant I/O (FT) supplied through the power switch (3 mA sink limit), default GPIO/OSC32_IN pin for the 32.768 kHz LSE crystal, alternate function TIM1_BKIN2.
10 PC15-OSC32_OUT bidirectional 5V-tolerant I/O (FT) supplied through the power switch (3 mA sink limit), default GPIO/OSC32_OUT pin for the 32.768 kHz LSE crystal, alternate functions OSC32_EN, OSC_EN, TIM15_BKIN.
11 VBAT power_in Battery backup supply, 1.55 V to 3.6 V, powers RTC, TAMP, the LSE 32.768 kHz oscillator and backup registers through an internal power switch when VDD is absent.
12 VREF+ power_in Analog reference voltage pin for ADC/DAC/comparators, or output of the internal VREFBUF (~2.048 V or ~2.5 V); must equal VDDA when VDDA<2 V and be between 2 V and VDDA when VDDA≥2 V.
13 VDD/VDDA power_in Main external power supply, 1.7 (1.6) V to 3.6 V, for the internal regulator, system/reset/clock logic and analog blocks (ADC, DAC, comparators, VREFBUF) since VDDA equals VDD.
14 VSS/VSSA power_in Common ground reference for the digital (VSS) and analog (VSSA) supplies.
15 PF0-OSC_IN bidirectional 5V-tolerant I/O (FT), default GPIO/OSC_IN pin for the 4-48 MHz HSE crystal oscillator, alternate functions CRS1_SYNC, EVENTOUT, TIM14_CH1.
16 PF1-OSC_OUT bidirectional 5V-tolerant I/O (FT), default GPIO/OSC_OUT pin for the HSE crystal oscillator, alternate functions OSC_EN, EVENTOUT, TIM15_CH1N.
17 PF2-NRST bidirectional Bidirectional reset pin with embedded weak pull-up; default function NRST drives the device into reset when pulled low, and can alternatively be used as GPIO with functions MCO, LPUART2_TX, LPUART2_RTS_DE.
18 PF3 bidirectional 5V-tolerant I/O (FT), default GPIO PF3 with alternate functions LPUART2_RX, USART6_RTS_DE_CK.
19 PF4 bidirectional 5V-tolerant I/O (FT), default GPIO PF4 with alternate function LPUART1_TX.
20 PF5 bidirectional 5V-tolerant I/O (FT), default GPIO PF5 with alternate function LPUART1_RX.
21 PC0 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PC0 with alternate functions LPTIM1_IN1, LPUART1_RX, LPTIM2_IN1, LPUART2_TX, USART6_TX, I2C3_SCL, COMP3_OUT and additional function COMP3_INM7.
22 PC1 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PC1 with alternate functions LPTIM1_OUT, LPUART1_TX, TIM15_CH1, LPUART2_RX, USART6_RX, I2C3_SDA and additional function COMP3_INP1.
23 PC2 bidirectional 5V-tolerant I/O (FT), default GPIO PC2 with alternate functions LPTIM1_IN2, SPI2_MISO/I2S2_MCK, TIM15_CH2, FDCAN2_RX, COMP3_OUT.
24 PC3 bidirectional 5V-tolerant I/O (FT), default GPIO PC3 with alternate functions LPTIM1_ETR, SPI2_MOSI/I2S2_SD, LPTIM2_ETR, FDCAN2_TX.
25 PA0 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PA0 with alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX, COMP1_OUT and additional functions COMP1_INM8, ADC_IN0, TAMP_IN2, WKUP1.
26 PA1 bidirectional 5V-tolerant analog/diode I/O (FT_ea), default GPIO PA1 with alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA, EVENTOUT and additional functions COMP1_INP2, ADC_IN1.
27 PA2 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PA2 with alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX, COMP2_OUT and additional functions COMP2_INM8, ADC_IN2, WKUP4, LSCO.
28 PA3 bidirectional 5V-tolerant analog/diode I/O (FT_ea), default GPIO PA3 with alternate functions SPI2_MISO/I2S2_MCK, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX, EVENTOUT and additional functions COMP2_INP2, ADC_IN3.
29 PA4 bidirectional 3.6V-tolerant analog-switch I/O (TT_a), default GPIO PA4 with alternate functions SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USB_NOE, USART6_TX, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX, EVENTOUT, SPI3_NSS and additional functions ADC_IN4, DAC1_OUT1, RTC_OUT2.
30 PA5 bidirectional 3.6V-tolerant analog/diode I/O (TT_ea), default GPIO PA5 with alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART6_RX, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX, EVENTOUT and additional functions ADC_IN5, DAC1_OUT2.
31 PA6 bidirectional 5V-tolerant analog/diode I/O (FT_ea), default GPIO PA6 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, LPUART1_CTS, COMP1_OUT, I2C2_SDA, I2C3_SDA and additional function ADC_IN6.
32 PA7 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PA7 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX, COMP2_OUT, I2C2_SCL, I2C3_SCL and additional function ADC_IN7.
33 PC4 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PC4 with alternate functions USART3_TX, USART1_TX, TIM2_CH1_ETR, FDCAN1_RX and additional functions COMP1_INM7, ADC_IN17.
34 PC5 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PC5 with alternate functions USART3_RX, USART1_RX, TIM2_CH2, FDCAN1_TX and additional functions COMP1_INP0, ADC_IN18, WKUP5.
35 PB0 bidirectional 5V-tolerant analog/diode I/O (FT_ea), default GPIO PB0 with alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, FDCAN2_RX, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX, COMP1_OUT, USART5_TX, LPUART2_CTS and additional functions COMP3_INP0, ADC_IN8.
36 PB1 bidirectional 5V-tolerant analog/diode I/O (FT_ea), default GPIO PB1 with alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, FDCAN2_TX, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE, COMP3_OUT, USART5_RX, LPUART2_RTS_DE and additional functions COMP1_INM6, ADC_IN9.
37 PB2 bidirectional 5V-tolerant analog/diode I/O (FT_ea), default GPIO PB2 with alternate functions SPI2_MISO/I2S2_MCK, MCO2, USART3_TX, LPTIM1_OUT, EVENTOUT and additional functions COMP1_INP1, COMP3_INM6, ADC_IN10.
38 PF6 bidirectional 5V-tolerant I/O (FT), default GPIO PF6 with alternate function LPUART1_RTS_DE.
39 PF7 bidirectional 5V-tolerant I/O (FT), default GPIO PF7 with alternate functions LPUART1_CTS, USART5_CTS.
40 PE7 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PE7 with alternate functions TIM1_ETR, USART5_RTS_DE_CK and additional function COMP3_INP2.
41 PE8 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PE8 with alternate functions USART4_TX, TIM1_CH1N and additional function COMP3_INM8.
42 PE9 bidirectional 5V-tolerant I/O (FT), default GPIO PE9 with alternate functions USART4_RX, TIM1_CH1.
43 PE10 bidirectional 5V-tolerant I/O (FT), default GPIO PE10 with alternate functions TIM1_CH2N, USART5_TX.
44 PE11 bidirectional 5V-tolerant I/O (FT), default GPIO PE11 with alternate functions TIM1_CH2, USART5_RX.
45 PE12 bidirectional 5V-tolerant I/O (FT), default GPIO PE12 with alternate functions SPI1_NSS/I2S1_WS, TIM1_CH3N.
46 PE13 bidirectional 5V-tolerant I/O (FT), default GPIO PE13 with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH3.
47 PE14 bidirectional 5V-tolerant I/O (FT), default GPIO PE14 with alternate functions SPI1_MISO/I2S1_MCK, TIM1_CH4, TIM1_BKIN2.
48 PE15 bidirectional 5V-tolerant I/O (FT), default GPIO PE15 with alternate functions SPI1_MOSI/I2S1_SD, TIM1_BKIN.
49 PB10 bidirectional 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB10 with alternate functions CEC, LPUART1_RX, TIM2_CH3, USART3_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, COMP1_OUT and additional function ADC_IN11.
50 PB11 bidirectional 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB11 with alternate functions SPI2_MOSI/I2S2_SD, LPUART1_TX, TIM2_CH4, USART3_RX, I2C2_SDA, COMP2_OUT and additional function ADC_IN15.
51 PB12 bidirectional 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB12 with alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, TIM1_BKIN, FDCAN2_RX, TIM15_BKIN, UCPD2_FRSTX, EVENTOUT, I2C2_SMBA and additional function ADC_IN16.
52 PB13 bidirectional 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs), default GPIO PB13 with alternate functions SPI2_SCK/I2S2_CK, LPUART1_CTS, TIM1_CH1N, FDCAN2_TX, USART3_CTS, TIM15_CH1N, I2C2_SCL, EVENTOUT.
53 PB14 bidirectional 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs), default GPIO PB14 with alternate functions SPI2_MISO/I2S2_MCK, UCPD1_FRSTX, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT, USART6_RTS_DE_CK.
54 PB15 bidirectional 5V-tolerant Fm+ USB Type-C PD capable I/O supplied from VDDIO2 (FT_fcs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA10 level; default GPIO PB15 with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT, USART6_CTS and additional functions UCPD1_CC2, RTC_REFIN.
55 PA8 bidirectional 5V-tolerant Fm+ USB Type-C PD capable I/O supplied from VDDIO2 (FT_fcs); may have a reset-time pull-down (disable via UCPDx_STROBE); default GPIO PA8 with alternate functions MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, CRS1_SYNC, LPTIM2_OUT, EVENTOUT, I2C2_SMBA and additional function UCPD1_CC1.
56 PA9 bidirectional 5V-tolerant Fm+ USB-PD dead-battery I/O supplied from VDDIO2 (FT_fds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA9 level; default GPIO PA9 with alternate functions MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT, I2C2_SCL and additional function UCPD1_DBCC1.
57 PC6 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC6 with alternate functions UCPD1_FRSTX, TIM3_CH1, TIM2_CH3, LPUART2_TX.
58 PC7 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC7 with alternate functions UCPD2_FRSTX, TIM3_CH2, TIM2_CH4, LPUART2_RX.
59 PD8 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD8 with alternate functions USART3_TX, SPI1_SCK/I2S1_CK, LPTIM1_OUT.
60 PD9 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD9 with alternate functions USART3_RX, SPI1_NSS/I2S1_WS, TIM1_BKIN2.
61 PD10 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD10 with alternate function MCO.
62 PD11 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD11 with alternate functions USART3_CTS, LPTIM2_ETR.
63 VSS power_in Digital ground supply pin.
64 VDDIO2 power_in Independent I/O supply, 1.6 V to 3.6 V, powers selected I/Os and VDDUSB; must not be applied without valid VDD present.
65 PD12 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD12 with alternate functions USART3_RTS_DE_CK, LPTIM2_IN1, TIM4_CH1, FDCAN1_RX.
66 PD13 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD13 with alternate functions LPTIM2_OUT, TIM4_CH2, FDCAN1_TX.
67 PD14 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD14 with alternate functions LPUART2_CTS, TIM4_CH3, FDCAN2_RX.
68 PD15 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD15 with alternate functions CRS1_SYNC, LPUART2_RTS_DE, TIM4_CH4, FDCAN2_TX.
69 PA10 bidirectional 5V-tolerant Fm+ USB-PD dead-battery I/O supplied from VDDIO2 (FT_fds); may have a reset-time pull-down (disable via UCPDx_STROBE); default GPIO PA10 with alternate functions SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT, I2C2_SDA and additional function UCPD1_DBCC2.
70 PA11 [PA9] bidirectional 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs); can be remapped to act as PA9 in place of pin 56 via SYSCFG_CFGR1; default GPIO PA11 with alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, FDCAN1_RX, TIM1_BKIN2, I2C2_SCL, COMP1_OUT and additional function USB_DM.
71 PA12 [PA10] bidirectional 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs); can be remapped to act as PA10 in place of pin 69 via SYSCFG_CFGR1; default GPIO PA12 with alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN, I2C2_SDA, COMP2_OUT and additional function USB_DP.
72 PF8 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PF8 with no listed alternate or additional functions.
73 PA13 bidirectional 5V-tolerant switchable-diode I/O supplied from VDDIO2 (FT_es); configured at reset as SWDIO debug function with internal pull-up active; alternate functions SWDIO, IR_OUT, USB_NOE, EVENTOUT, LPUART2_RX.
74 PA14-BOOT0 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s); configured at reset as SWCLK debug function with internal pull-down active; alternate functions SWCLK, USART2_TX, EVENTOUT, LPUART2_TX; additional function BOOT0 selects boot source at startup.
75 PA15 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PA15 with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA, SPI3_NSS.
76 PC8 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC8 with alternate functions UCPD2_FRSTX, TIM3_CH3, TIM1_CH1, LPUART2_CTS.
77 PC9 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC9 with alternate functions I2S_CKIN, TIM3_CH4, TIM1_CH2, LPUART2_RTS_DE, USB_NOE.
78 PD0 bidirectional 5V-tolerant USB Type-C PD capable I/O supplied from VDDIO2 (FT_cs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA10 level; default GPIO PD0 with alternate functions EVENTOUT, SPI2_NSS/I2S2_WS, TIM16_CH1, FDCAN1_RX and additional function UCPD2_CC1.
79 PD1 bidirectional 5V-tolerant USB-PD dead-battery I/O supplied from VDDIO2 (FT_ds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD1 level; default GPIO PD1 with alternate functions EVENTOUT, SPI2_SCK/I2S2_CK, TIM17_CH1, FDCAN1_TX and additional function UCPD2_DBCC1.
80 PD2 bidirectional 5V-tolerant USB Type-C PD capable I/O supplied from VDDIO2 (FT_cs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD1 level; default GPIO PD2 with alternate functions USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N, USART5_RX and additional function UCPD2_CC2.
81 PD3 bidirectional 5V-tolerant USB-PD dead-battery I/O supplied from VDDIO2 (FT_ds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD3 level; default GPIO PD3 with alternate functions USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART5_TX and additional function UCPD2_DBCC2.
82 PD4 bidirectional 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD4 with alternate functions USART2_RTS_DE_CK, SPI2_MOSI/I2S2_SD, TIM1_CH3N, USART5_RTS_DE_CK.
83 PD5 bidirectional 5V-tolerant I/O (FT), default GPIO PD5 with alternate functions USART2_TX, SPI1_MISO/I2S1_MCK, TIM1_BKIN, USART5_CTS.
84 PD6 bidirectional 5V-tolerant I/O (FT), default GPIO PD6 with alternate functions USART2_RX, SPI1_MOSI/I2S1_SD, LPTIM2_OUT.
85 PD7 bidirectional 5V-tolerant I/O (FT), default GPIO PD7 with alternate function MCO2.
86 PF9 bidirectional 5V-tolerant I/O (FT), default GPIO PF9 with alternate function USART6_TX.
87 PF10 bidirectional 5V-tolerant I/O (FT), default GPIO PF10 with alternate function USART6_RX.
88 PF11 bidirectional 5V-tolerant I/O (FT), default GPIO PF11 with alternate function USART6_RTS_DE_CK.
89 PF12 bidirectional 5V-tolerant I/O (FT), default GPIO PF12 with alternate functions TIM15_CH1, USART6_CTS.
90 PF13 bidirectional 5V-tolerant I/O (FT), default GPIO PF13 with alternate function TIM15_CH2.
91 PB3 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PB3 with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL, SPI3_SCK and additional function COMP2_INM6.
92 PB4 bidirectional 5V-tolerant analog-switch I/O (FT_a), default GPIO PB4 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA, SPI3_MISO and additional function COMP2_INP0.
93 PB5 bidirectional 5V-tolerant I/O (FT), default GPIO PB5 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN2_RX, LPTIM1_IN1, I2C1_SMBA, COMP2_OUT, USART5_RTS_DE_CK, SPI3_MOSI and additional function WKUP6.
94 PE0 bidirectional 5V-tolerant I/O (FT), default GPIO PE0 with alternate functions TIM16_CH1, EVENTOUT, TIM4_ETR.
95 PE1 bidirectional 5V-tolerant I/O (FT), default GPIO PE1 with alternate functions TIM17_CH1, EVENTOUT.
96 PE2 bidirectional 5V-tolerant I/O (FT), default GPIO PE2 with alternate function TIM3_ETR.
97 PE3 bidirectional 5V-tolerant I/O (FT), default GPIO PE3 with alternate function TIM3_CH1.
98 PB6 bidirectional 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB6 with alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, FDCAN2_TX, SPI2_MISO/I2S2_MCK, LPTIM1_ETR, I2C1_SCL, EVENTOUT, USART5_CTS, TIM4_CH1, LPUART2_TX and additional function COMP2_INP1.
99 PB7 bidirectional 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB7 with alternate functions USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA, EVENTOUT, TIM4_CH2, LPUART2_RX and additional functions COMP2_INM7, PVD_IN.
100 PB8 bidirectional 5V-tolerant Fm+ I/O (FT_f), default GPIO PB8 with alternate functions CEC, SPI2_SCK/I2S2_CK, TIM16_CH1, FDCAN1_RX, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX, TIM4_CH3.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

CAD (KiCad official)

  • Symbol: STM32G0B1VCT6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32g0b1vct6-etched.step / stm32g0b1vct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g0b1vct6.step / stm32g0b1vct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (159 pp, sha256 19ad77934ee0849d, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF