Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS76030DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS76030DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage for the regulator; the recommended VI range for the TPS76030 is 3.2 V to 16 V, and the absolute maximum input voltage is 16 V (-0.3 V to 16 V).
2 GND power_in Ground pin; all voltages on the device are referenced to this GND pin, and a capacitor of at least 2.2 µF with ESR between 0.1 Ω and 20 Ω must connect OUT to GND for stability.
3 EN input Enable input; a logic low (0.8 V maximum) shuts the regulator off and a logic high (2 V minimum) enables it, and the pin must not be left floating.
4 NC unconnected No internal connection; the pin is not connected inside the device.
5 OUT power_out Regulated output voltage (3 V nominal for the TPS76030), with continuous output current of 0 to 50 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage, VI (TPS76030) VI 3.2 16 V 2
Continuous output current IO 0 50 mA 2
Operating junction temperature TJ -40 125 °C 2
Input voltage range VI -0.3 16 V All voltages with respect to device GND pin 2
Voltage range at EN -0.3 V Maximum printed as VI + 0.3 V (not numeric) 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
ESD rating, HBM 1.5 kV Human body model 2
Output voltage (TPS76030) VO 2.96 3 3.04 V TJ = 25°C 3
Output voltage (TPS76030) VO 2.92 3.04 V TJ = 25°C, 1 mA < IO < 50 mA 3
Output voltage (TPS76030) VO 2.91 3.07 V 1 mA < IO < 50 mA 3
Standby current II(standby) 1 µA EN = 0 V 3
Quiescent current (GND current) 90 115 µA IO = 0 mA, TJ = 25°C 3
Quiescent current (GND current) 130 µA IO = 0 mA 3
Quiescent current (GND current) 100 130 µA IO = 1 mA, TJ = 25°C 3
Quiescent current (GND current) 170 µA IO = 1 mA 3
Quiescent current (GND current) 190 215 µA IO = 10 mA, TJ = 25°C 3
Quiescent current (GND current) 260 µA IO = 10 mA 3
Quiescent current (GND current) 850 1100 µA IO = 50 mA, TJ = 25°C 3
Quiescent current (GND current) 1200 µA IO = 50 mA 3
Input regulation (TPS76030) 3 10 mV 4 V < VI < 16, IO = 1 mA 3
Dropout voltage 1 3 mV IO = 0 mA, TJ = 25°C 3
Dropout voltage 5 mV IO = 0 mA 3
Dropout voltage 7 10 mV IO = 1 mA, TJ = 25°C 3
Dropout voltage 15 mV IO = 1 mA 3
Dropout voltage 40 60 mV IO = 10 mA, TJ = 25°C 3
Dropout voltage 90 mV IO = 10 mA 3
Dropout voltage 120 150 mV IO = 50 mA, TJ = 25°C 3
Dropout voltage 180 mV IO = 50 mA 3
Peak output current / current limit 100 125 135 mA 3
High level enable input 2 V 3
Low level enable input 0.8 V 3
Input current (EN) II -1 0 1 µA EN = 0 V 3
Input current (EN) II 2.5 5 µA EN = VI 3
Junction-to-case thermal resistance RθJC 65.8 °C/W DBV package, Low K and High K JEDEC boards 2
Junction-to-ambient thermal resistance RθJA 259 °C/W Low K JEDEC (1s) board, DBV package 2
Junction-to-ambient thermal resistance RθJA 180 °C/W High K JEDEC (2s2p) board, DBV package 2
Derating factor above TA = 25°C 3.9 mW/°C Low K JEDEC (1s) board, DBV package 2
Derating factor above TA = 25°C 5.6 mW/°C High K JEDEC (2s2p) board, DBV package 2

CAD (KiCad official)

  • Symbol: TPS76030DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps76030dbvr-etched.step / tps76030dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps76030dbvr.step / tps76030dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 6a5a0b28ed88cb00, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF