component
L32AOC013560PBL
Public Made by Adomby adom
Lucki Crystal Oscillators, SMD3225-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownL32AOC013560PBL
Lucki · Crystal Oscillators · SMD3225-4P
L32AOC013560PBL from Lucki, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E/D | input | Enable/disable input: high (VIH 0.7VDD to VDD) or open enables normal output at pin 3, while low (VIL 0 to 0.3VDD) puts pin 3 in high impedance and stops oscillation; a low-plus-floating state is unstable and disallowed. |
| 2 | GND | power_in | Ground reference; a 0.01uF bypass capacitor should be placed between VDD (pin 4) and this GND pin to minimize power supply noise. |
| 3 | Output | output | HCMOS clock output at 13.560 MHz, with 45-55% symmetry, 4.0 ns maximum rise and fall times (10-90%), and a recommended load of 15 pF (one CMOS/TTL gate). |
| 4 | VDD | power_in | Supply pin rated 3.3 V ±10%; a 0.01uF bypass capacitor should be placed between this pin and GND (pin 2). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lucki |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency stability (all conditions, see note *) | -20 | 20 | ppm | All condition* | 3 | ||
| Operating temperature range | TOPR | -10 | 70 | ℃ | 3 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 3 | ||
| Power supply voltage tolerance (nominal 3.3 V) | VDD | -10 | 10 | % | Nominal 3.3 V | 3 | |
| Aging per year | Fa | -3 | 3 | ppm | First Year | 3 | |
| Supply current | IDD | 10 | A | 3 | |||
| Output symmetry | Sym | 45 | 55 | % | 3 | ||
| Rise time | Tr | 4 | ns | 10%~90%VDD | 3 | ||
| Fall time | Tf | 4 | ns | 90%~10%VDD | 3 | ||
| Output voltage high | VOH | 90 | % VDD | 3 | |||
| Output voltage low | VOL | 10 | % VDD | 3 | |||
| Enable input high level (pin 1) | VIH | 0.7 | *VDD | Pin 1 high or open; upper limit is VDD | 4 | ||
| Enable input low level (pin 1) | VIL | 0.3 | *VDD | Pin 1 low; lower limit is 0 V | 4 | ||
| Start-up time | 10 | S | 3 | ||||
| Nominal frequency | F0 | 13.56 | MHz | 3 | |||
| Power supply voltage (nominal) | VDD | 3.3 | V | ±10% per tolerance row | 3 | ||
| Output load (HCMOS) | Hcmos Load | 15 | pF | 3 |
CAD (KiCad official)
- Symbol:
L32AOC013560PBL - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
l32aoc013560pbl-etched.step/l32aoc013560pbl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l32aoc013560pbl.step/l32aoc013560pbl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lucki datasheet (10 pp, sha256
ab1d334bcb2cbfbe, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).