component
NC7SZ27P6X
Public Made by Adomby adom
onsemi Logic Gates, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNC7SZ27P6X
onsemi · Logic Gates · SC-70-6
NC7SZ27P6X from onsemi, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | input | Logic input A of the 3-input NOR gate; input voltage is rated 0 V to 5.5 V and inputs tolerate up to 5.5 V independent of VCC. |
| 2 | GND | power_in | Ground reference pin of the device, shown as GND in the SC-88 top view and pin descriptions, with no separate electrical limit stated for this pin. |
| 3 | B | input | Logic input B of the 3-input NOR gate; input voltage is rated 0 V to 5.5 V and unused inputs must be held HIGH or LOW and may not float. |
| 4 | Y | output | NOR gate output, which swings between 0 V and VCC as stated for VOUT in the recommended operating conditions. |
| 5 | VCC | power_in | Supply voltage pin, specified for operation from 1.65 V to 5.5 V (data retention from 1.5 V). |
| 6 | C | input | Logic input C of the 3-input NOR gate; input voltage is rated 0 V to 5.5 V and unused inputs must be held HIGH or LOW and may not float. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-6 |
| Category | Logic |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
NC7SZ27P6X - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
nc7sz27p6x-etched.step/nc7sz27p6x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nc7sz27p6x.step/nc7sz27p6x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (9 pp, sha256
5a6fe6f18c96c731, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).