3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2576S-ADJ-MS
MSKSEMI · DC-DC Converters · TO-263-5L
LM2576S-ADJ-MS from MSKSEMI, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Input supply voltage; the LM2576 operating supply range is 40V and the absolute maximum supply voltage is 45V. |
| 2 | Output | output | Switching output that drives the external inductor and catch diode; the output-to-ground steady-state voltage is limited to -1V. |
| 3 | Gnd | power_in | Ground reference pin for the regulator; single-point or ground-plane grounding is recommended for best results. |
| 4 | Feedback | input | Output voltage feedback input; for the adjustable version it is set by R1/R2 with VREF = 1.23V. |
| 5 | ON/OFF | input | Shutdown control where the output is enabled when the pin is Low or floating; the pin voltage range is -0.3V to +VIN. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TO-263-5L |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VOUT Feedback Voltage | VOUT | 1.217 | 1.23 | 1.243 | V | VIN =12V, ILOAD =0.5A, VOUT =5V; Circuit of Figure 2 | 5 |
| VOUT Feedback Voltage LM2576 | VOUT | 1.193 | 1.23 | 1.267 | V | 0.5A ≤ ILOAD ≤ 3A, 8V ≤ VIN ≤ 40V, VOUT =5V; Circuit of Figure 2 | 5 |
| Feedback Bias Current | Ib | 50 | 100 | nA | VOUT =5V (Adjustable Version Only) | 6 | |
| Oscillator Frequency | fO | 47 | 52 | 58 | kHz | (Note 8) | 6 |
| Saturation Voltage | VSAT | 1.4 | 1.8 | V | IOUT =3A (Note 4) | 6 | |
| DC Max Duty Cycle (ON) | DC | 93 | 98 | % | (Note 5) | 6 | |
| Current Limit | ICL | 4.2 | 5.8 | 6.9 | A | (Notes 4, 8) | 6 |
| Output Leakage Current | IL | 7.5 | 30 | mA | Output = -1V | 6 | |
| Output Leakage Current | IL | 2 | mA | Output = -1V | 6 | ||
| Quiescent Current | IQ | 5 | 10 | mA | (Note 6) | 6 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | µA | ON/OFF Pin = 5V (OFF) | 6 | |
| ON/OFF Pin Logic Input Level VIH | VIH | 2.2 | 1.4 | V | VOUT = 0V | 6 | |
| ON/OFF Pin Logic Input Level VIL | VIL | 1.2 | 1 | V | VOUT = Nominal Output Voltage | 6 | |
| ON/OFF Pin Input Current IIH | IIH | 12 | 30 | µA | ON/OFF Pin = 5V (OFF) | 6 | |
| ON/OFF Pin Input Current IIL | IIL | 0 | 10 | µA | ON/OFF Pin = 0V (ON) | 6 | |
| Maximum Supply Voltage | 45 | V | LM2576 | 4 | |||
| ON/OFF Pin Input Voltage | -0.3 | V | -0.3V ≤ V ≤ +VIN | 4 | |||
| Output Voltage to Ground (Steady State) | -1 | V | Steady State | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| Minimum ESD Rating | 2 | kV | C= 100pF, R = 1.5 kΩ | 4 | |||
| Lead Temperature (Soldering, 10 Seconds) | 260 | °C | Soldering, 10 Seconds | 4 | |||
| Supply Voltage | 40 | V | LM2576 | 4 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | LM2576/LM2576HV | 4 |
CAD (KiCad official)
- Symbol:
LM2576S-ADJ-MS - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5L (KiCad packages3D, STEP)
- 3D model files:
lm2576s-adj-ms-etched.step/lm2576s-adj-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576s-adj-ms.step/lm2576s-adj-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (12 pp, sha256
bc60041f4dd916f0, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).