component
LTC6752IMS8-2#TRPBF
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC6752IMS8-2#TRPBF
Analog Devices · Pre-ordered Chips · MSOP-8
LTC6752IMS8-2#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply for the input stage of the LTC6752-2, with an input supply range of 2.45V to 5.25V. |
| 2 | +IN | input | Positive comparator input whose voltage range can go from VEE to VCC. |
| 3 | -IN | input | Negative comparator input whose voltage range can go from VEE to VCC. |
| 4 | SHDN | input | Active-low comparator shutdown with a threshold 0.6V above VEE; the comparator is enabled when the pin is left unconnected. |
| 5 | LE/HYST | input | Adjusts hysteresis and latches the output when taken to within 300mV above VEE; leaving it unconnected gives a typical hysteresis of 5mV. |
| 6 | VEE | power_in | Negative power supply, normally tied to ground. |
| 7 | Q | output | Comparator output, driven high when +IN is greater than -IN and driven low when +IN is less than -IN. |
| 8 | VDD | power_in | Positive supply for the output stage of the LTC6752-2, typically 1.71V to 3.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Stage Supply Voltage (VCC-VEE) | VCC - VEE | 2.45 | 5.25 | V | LTC6752-2/LTC6752-3/LTC6752-4 input stage; l | 3 | |
| Output Stage Supply Voltage (VDD-VEE) | VDD - VEE | 1.71 | 3.5 | V | LTC6752-2/LTC6752-3/LTC6752-4 output stage; l | 3 | |
| Input Offset Voltage | VOS | -5.5 | 5.5 | mV | TA=25°C; VCC=VDD=2.5V | 3 | |
| Input Offset Voltage over temperature | VOS | -8.5 | 8.5 | mV | over specified temperature range (l); VCC=VDD=2.5V | 3 | |
| Input Offset Voltage Drift | TCVOS | 18 | µV/°C | l; VCC=VDD=2.5V | 3 | ||
| Input Bias Current (low common mode, VCM=VEE+0.3V) | IB | -3.8 | -1.35 | µA | VCM = VEE + 0.3V; TA=25°C; VCC=VDD=2.5V | 3 | |
| Input Bias Current over temperature (VCM=VEE+0.3V) | IB | -4 | µA | VCM = VEE + 0.3V; l | 3 | ||
| Input Bias Current (high common mode, VCM=VCC-0.3V) | IB | 0.3 | 1.25 | µA | VCM = VCC - 0.3V; TA=25°C; VCC=VDD=2.5V | 3 | |
| Input Bias Current over temperature (VCM=VCC-0.3V) | IB | 2.1 | µA | VCM = VCC - 0.3V; l | 3 | ||
| Input Offset Current | IOS | -0.75 | 0.75 | µA | l; VCC=VDD=2.5V | 3 | |
| Common Mode Rejection Ratio, Low VCM Region | CMRR_LVCM | 51 | 69 | dB | VCM = VEE - 0.2V to VCC - 1.5V; TA=25°C | 3 | |
| Common Mode Rejection Ratio, Low VCM Region over temperature | CMRR_LVCM | 46 | dB | VCM = VEE - 0.2V to VCC - 1.5V; l | 3 | ||
| Common Mode Rejection Ratio, Full Range | CMRR_FR | 50 | 65 | dB | VCM = VEE - 0.2V to VCC + 0.1V; TA=25°C | 3 | |
| Common Mode Rejection Ratio, Full Range over temperature | CMRR_FR | 45.5 | dB | VCM = VEE - 0.2V to VCC + 0.1V; l | 3 | ||
| Input Power Supply Rejection Ratio | PSRR_VCC | 59 | 74 | dB | VCM=0.3V, VDD=2.5V, VCC 2.45V to 5.25V (LTC6752-2/-3/-4); TA=25°C | 4 | |
| Input Power Supply Rejection Ratio over temperature | PSRR_VCC | 57 | dB | VCM=0.3V, VDD=2.5V, VCC 2.45V to 5.25V; l | 4 | ||
| Output Power Supply Rejection Ratio | PSRR_VDD | 56 | 71 | dB | VCM=0.3V, VDD 1.71V to 3.5V (LTC6752-2/-3/-4); TA=25°C | 4 | |
| Output Power Supply Rejection Ratio over temperature | PSRR_VDD | 51 | dB | VCM=0.3V, VDD 1.71V to 3.5V; l | 4 | ||
| Output High Voltage | VOH | 130 | 260 | 340 | mV | ISOURCE = 8mA; l | 4 |
| Output Low Voltage | VOL | 200 | 340 | 400 | mV | ISINK = 8mA; l | 4 |
| Output Short-Circuit Current Source | ISC | 16 | 30 | mA | Source; TA=25°C | 4 | |
| Output Short-Circuit Current Source over temperature | ISC | 12 | mA | Source; l | 4 | ||
| Output Short-Circuit Current Sink | ISC | 15 | 22 | mA | Sink; TA=25°C | 4 | |
| Output Short-Circuit Current Sink over temperature | ISC | 9 | mA | Sink; l | 4 | ||
| VCC Supply Current, Device On (LTC6752-2/-3/-4) | IVCC | 1.9 | 2.25 | 2.5 | mA | LTC6752-2/LTC6752-3/LTC6752-4; l | 4 |
| VDD Supply Current, Device On (LTC6752-2/-4) | IVDD | 2.6 | 3.2 | 3.4 | mA | LTC6752-2/LTC6752-4; l | 4 |
| Total Supply Current, Device On (LTC6752-2/-4) | ITOTAL | 4.5 | 5 | 5.9 | mA | LTC6752/LTC6752-1/LTC6752-2/LTC6752-4; l | 4 |
| Propagation Delay | tPD | 2.9 | 5 | ns | VOVERDRIVE = 50mV; TA=25°C | 4 | |
| Propagation Delay over temperature | tPD | 5.5 | ns | VOVERDRIVE = 50mV; l | 4 | ||
| Toggle Rate (LTC6752-2) | TR | 280 | MHz | 100mVP-P input, LTC6752/LTC6752-1/LTC6752-2/LTC6752-4 | 4 | ||
| LE/HYST Pin Voltage Open Circuit | VLE/HYST | 1.05 | 1.25 | 1.45 | V | Open circuit; l | 5 |
| Resistance Looking Into LE/HYST | RHYST | 15 | 20 | 25 | kΩ | LE/HYST pin voltage < open circuit value; l | 5 |
| Latch Pin Voltage, Latch Guaranteed | VIL_LE | 0.3 | V | l | 5 | ||
| Latch Pin Voltage, Hysteresis Disabled Output Not Latched | VIH_LE | 1.7 | V | l | 5 | ||
| Latch Pin Current High | IIH_LE | 30 | 72 | µA | VLE/HYST = 1.7V; l | 5 | |
| Latch Pin Current Low | IIL_LE | -70 | -47 | µA | VLE/HYST = 0.3V; l | 5 | |
| Shutdown Mode Input Stage Supply Current | ISD_VCC | 400 | 585 | µA | VSHDN = 0.6V; TA=25°C | 5 | |
| Shutdown Mode Input Stage Supply Current over temperature | ISD_VCC | 620 | µA | VSHDN = 0.6V; l | 5 | ||
| Shutdown Mode Output Stage Supply Current (LTC6752-2) | ISD_VDD | 185 | 340 | µA | VSHDN = 0.6V, LTC6752-2; TA=25°C | 5 | |
| Shutdown Mode Output Stage Supply Current over temperature (LTC6752-2) | ISD_VDD | 380 | µA | VSHDN = 0.6V, LTC6752-2; l | 5 | ||
| Shutdown Pin Voltage High | VIH_SD | 1.3 | V | Part guaranteed to be powered on; l | 5 | ||
| Shutdown Pin Voltage Low | VIL_SD | 0.6 | V | Part guaranteed to be powered off; l | 5 | ||
| Total Supply Voltage VCC to VEE (LTC6752-2/-3/-4) | VCC - VEE | 5.5 | V | LTC6752-2/LTC6752-3/LTC6752-4 | 2 | ||
| Input Current (+IN, -IN, SHDN, LE/HYST) | -10 | 10 | mA | Note 2 | 2 | ||
| Output Current (Q, Q) | -50 | 50 | mA | Note 3 | 2 | ||
| Specified Temperature Range (LTC6752I) | -40 | 85 | °C | LTC6752I grade | 2 | ||
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| Maximum Junction Temperature | 150 | °C | Note 3 | 2 | |||
| Lead Temperature Soldering | 300 | °C | 10s | 2 | |||
| Thermal Resistance Junction to Ambient (MS8) | θJA | 163 | °C/W | MS8 package, TJMAX = 150°C (Note 3) | 2 |
CAD (KiCad official)
- Symbol:
LTC6752IMS8-2#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc6752ims8-2-trpbf-etched.step/ltc6752ims8-2-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6752ims8-2-trpbf.step/ltc6752ims8-2-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (30 pp, sha256
d0e3d938d1b220ae, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).