3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP3004-I/SL
Microchip Tech · Analog To Digital Converters (ADCs) · SOIC-14
MCP3004-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CH0 | input | Analog input channel 0, programmable as single-ended or as part of a pseudo-differential pair with CH1. |
| 2 | CH1 | input | Analog input channel 1, programmable as single-ended or as part of a pseudo-differential pair with CH0. |
| 3 | CH2 | input | Analog input channel 2, programmable as single-ended or as part of a pseudo-differential pair with CH3. |
| 4 | CH3 | input | Analog input channel 3, programmable as single-ended or as part of a pseudo-differential pair with CH2. |
| 5 | NC | unconnected | No connection. |
| 6 | NC | unconnected | No connection. |
| 7 | DGND | power_in | Digital ground connection to internal digital circuitry. |
| 8 | CS/SHDN | input | Chip select/shutdown input; low initiates communication, high ends a conversion and puts the device in low-power standby, and it must be pulled high between conversions. |
| 9 | DIN | input | SPI serial data input used to load channel configuration data into the device. |
| 10 | DOUT | output | SPI serial data output that shifts out the A/D conversion result, changing on the falling edge of each clock. |
| 11 | CLK | input | SPI serial clock that initiates a conversion and clocks out each bit of the conversion result. |
| 12 | AGND | power_in | Analog ground connection to internal analog circuitry. |
| 13 | VREF | power_in | Reference voltage input. |
| 14 | VDD | power_in | +2.7V to 5.5V power supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Data Converters |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Conversion Time | tCONV | 10 | clock cycles | 3 | |||
| Throughput Rate | fSAMPLE | 200 | ksps | VDD = VREF = 5V | 3 | ||
| Throughput Rate | fSAMPLE | 75 | ksps | VDD = VREF = 2.7V | 3 | ||
| Integral Nonlinearity | INL | -1 | 0.5 | 1 | LSB | 3 | |
| Differential Nonlinearity | DNL | -1 | 0.25 | 1 | LSB | No missing codes over temperature | 3 |
| Offset Error | -1.5 | 1.5 | LSB | 3 | |||
| Gain Error | -1 | 1 | LSB | 3 | |||
| Reference Input Voltage Range | 0.25 | V | Note 2; upper limit printed as VDD | 3 | |||
| Reference Current Drain | 100 | 150 | µA | 3 | |||
| Reference Current Drain | 0.001 | 3 | µA | CS = VDD = 5V | 3 | ||
| Input Voltage Range for IN- in pseudo-differential mode | -100 | 100 | mV | VSS-100 to VSS+100 | 3 | ||
| Leakage Current | -1 | 0.001 | 1 | µA | 4 | ||
| High Level Input Voltage | VIH | 0.7 | VDD | 4 | |||
| Low Level Input Voltage | VIL | 0.3 | VDD | 4 | |||
| High Level Output Voltage | VOH | 4.1 | V | IOH = -1 mA, VDD = 4.5V | 4 | ||
| Low Level Output Voltage | VOL | 0.4 | V | IOL = 1 mA, VDD = 4.5V | 4 | ||
| Input Leakage Current | ILI | -10 | 10 | µA | VIN = VSS or VDD | 4 | |
| Output Leakage Current | ILO | -10 | 10 | µA | VOUT = VSS or VDD | 4 | |
| Pin Capacitance (All Inputs/Outputs) | CIN, COUT | 10 | pF | VDD = 5.0V (Note 1), TA = 25°C, f = 1 MHz | 4 | ||
| Clock Frequency | fCLK | 3.6 | MHz | VDD = 5V (Note 3) | 4 | ||
| Clock Frequency | fCLK | 1.35 | MHz | VDD = 2.7V (Note 3) | 4 | ||
| Clock High Time | tHI | 125 | ns | 4 | |||
| Clock Low Time | tLO | 125 | ns | 4 | |||
| CS Fall To First Rising CLK Edge | tSUCS | 100 | ns | 4 | |||
| CS Fall To Falling CLK Edge | tCSD | 0 | ns | 4 | |||
| Data Input Setup Time | tSU | 50 | ns | 4 | |||
| Data Input Hold Time | tHD | 50 | ns | 4 | |||
| CLK Fall To Output Data Valid | tDO | 125 | ns | VDD = 5V, See Figure 1-2 | 4 | ||
| CLK Fall To Output Data Valid | tDO | 200 | ns | VDD = 2.7V, See Figure 1-2 | 4 | ||
| CLK Fall To Output Enable | tEN | 125 | ns | VDD = 5V, See Figure 1-2 | 4 | ||
| CLK Fall To Output Enable | tEN | 200 | ns | VDD = 2.7V, See Figure 1-2 | 4 | ||
| CS Rise To Output Disable | tDIS | 100 | ns | See Test Circuits, Figure 1-2 | 4 | ||
| CS Disable Time | tCSH | 270 | ns | 4 | |||
| DOUT Rise Time | tR | 100 | ns | See Test Circuits, Figure 1-2 (Note 1) | 4 | ||
| DOUT Fall Time | tF | 100 | ns | See Test Circuits, Figure 1-2 (Note 1) | 4 | ||
| Operating Voltage | VDD | 2.7 | 5.5 | V | 5 | ||
| Operating Current | IDD | 425 | 550 | µA | VDD = VREF = 5V, DOUT unloaded | 5 | |
| Operating Current | IDD | 225 | µA | VDD = VREF = 2.7V, DOUT unloaded | 5 | ||
| Standby Current | IDDS | 0.005 | 2 | µA | CS = VDD = 5.0V | 5 | |
| Specified Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Thermal Resistance, 14L-SOIC | θJA | 108 | °C/W | 5 | |||
| All Inputs and Outputs w.r.t. VSS | -0.6 | V | -0.6V to VDD + 0.6V | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -65 | 150 | °C | 3 | |||
| Soldering temperature of leads | 300 | °C | 10 seconds | 3 | |||
| ESD Protection On All Pins (HBM) | 4 | kV | ≥ 4 kV | 3 | |||
| Resolution | 10 | bits | 3 | ||||
| Analog Input Sample Time | tSAMPLE | 1.5 | clock cycles | 3 | |||
| Total Harmonic Distortion | -76 | dB | VIN = 0.1V to 4.9V@1 kHz | 3 | |||
| Signal-to-Noise and Distortion (SINAD) | SINAD | 61 | dB | VIN = 0.1V to 4.9V@1 kHz | 3 | ||
| Spurious Free Dynamic Range | SFDR | 78 | dB | VIN = 0.1V to 4.9V@1 kHz | 3 | ||
| Switch Resistance | 1000 | Ω | See Figure 4-1 | 4 | |||
| Sample Capacitor | 20 | pF | See Figure 4-1 | 4 |
CAD (KiCad official)
- Symbol:
MCP3004-I - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mcp3004-i-etched.step/mcp3004-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3004-i.step/mcp3004-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (40 pp, sha256
e6c2231de727395f, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP3004-I/SL. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP3004-I/P
- MCP3004-I/ST